CCNP SWITCH FINAL EXAM QUESTIONS
AND CORRECT ANSWERS
What are three possible misconfigurations or indicators of misconfigurations on a Layer
3 interface? (Choose three.)
1. wrong IP address or subnet mask
2. ports in the wrong VLAN
3. mismatch between SVI and VLAN numbering
4. disabled VTP pruning
5. downed SVI
6. ACL on wrong interface - Answer-1. wrong IP address or subnet mask
5. downed SVI
6. ACL on wrong interface
Refer to the exhibit. What two effects will occur when a fourth distribution module is
included in the campus enterprise network that is depicted in the exhibit? (Choose two.)
1. The inclusion of the fourth module will increase the routing complexity
2. It will limit the traffic flow in the network
3. It will provide scalability for future growth
4. It will impact the security of the traffic between the distribution switches
5. It will increase the number of additional links that are required to provide redundant
connectivity - Answer-1. The inclusion of the fourth module will increase the routing
complexity.
5. It will increase the number of additional links that are required to provide redundant
connectivity.
Refer to the exhibit. What statement is true about the way HSRP is configured?
a. Switch DLS1 is the standby router for VLANs 1, 10, and 20
b. Switch DLS2 is the standby router for VLANs 30 and 40
c. Issuing the show standby command on switch DLS1 will reveal that the HSRP state
for VLAN 10 is standby
d. Issuing the show standby command on switch DLS2 will reveal that the HSRP state
for VLAN 30 is standby
e. By setting different priorities on different VLANs, a type of load balancing is occurring
f. If the Ethernet cables between switch DLS2 and switch ALS1 were severed, Payroll
Host would not be able to reach SQL server - Answer-e. By setting different priorities on
different VLANs, a type of load balancing is occurring.
When should a proactive management be performed within the stages of the Cisco
Lifecycle Services?
, a. prepare phase
b. plan phase
c. design phase
d. implement phase
e. operate phase
f. optimize phase - Answer-f. optimize phase
What type of queuing provides the best quality for voice applications?
a. custom queuing
b. FIFO queuing
c. priority queuing
d. weighted round robin (WRR) queuing - Answer-c. priority queuing
Which statement is true concerning the core layer within the hierarchical design model?
a. Remote users are granted access to the network through the core
b. Routing should be configured without traffic filtering, address translation, or other
packet manipulation at the core
c. The core, which acts as the front door to a network, is designed to prevent
unauthorized users from gaining entry
d. The core provides an optimized and reliable transport structure by using a
combination of route summaries, distribution lists, and route maps - Answer-b. Routing
should be configured without traffic filtering, address translation, or other packet
manipulation at the core.
When a port security violation occurs on a switch port, the switch sends a syslog
message but does not shut down the port. What port security mode is in effect?
a. sticky
b. shutdown
c. restrict
d. protect - Answer-c. restrict
Refer to the exhibit. The indicated configuration was established on the HSRP standby
router RTB. However, the console message %IP-4-DUPADDR started appearing almost
immediately on the RTB router. Given the output of the show standby brief command on
RTA, what is the cause of the problem?
a. The command standby preempt should only be applied on the active router
b. The subnet mask is missing from the standby ip 10.1.1.1 command
c. The group number 50 is missing in the Router RTB configuration command
d. The priority number 150 is missing in the Router RTB configuration commands
e. The virtual IP address should be the same as the active router
AND CORRECT ANSWERS
What are three possible misconfigurations or indicators of misconfigurations on a Layer
3 interface? (Choose three.)
1. wrong IP address or subnet mask
2. ports in the wrong VLAN
3. mismatch between SVI and VLAN numbering
4. disabled VTP pruning
5. downed SVI
6. ACL on wrong interface - Answer-1. wrong IP address or subnet mask
5. downed SVI
6. ACL on wrong interface
Refer to the exhibit. What two effects will occur when a fourth distribution module is
included in the campus enterprise network that is depicted in the exhibit? (Choose two.)
1. The inclusion of the fourth module will increase the routing complexity
2. It will limit the traffic flow in the network
3. It will provide scalability for future growth
4. It will impact the security of the traffic between the distribution switches
5. It will increase the number of additional links that are required to provide redundant
connectivity - Answer-1. The inclusion of the fourth module will increase the routing
complexity.
5. It will increase the number of additional links that are required to provide redundant
connectivity.
Refer to the exhibit. What statement is true about the way HSRP is configured?
a. Switch DLS1 is the standby router for VLANs 1, 10, and 20
b. Switch DLS2 is the standby router for VLANs 30 and 40
c. Issuing the show standby command on switch DLS1 will reveal that the HSRP state
for VLAN 10 is standby
d. Issuing the show standby command on switch DLS2 will reveal that the HSRP state
for VLAN 30 is standby
e. By setting different priorities on different VLANs, a type of load balancing is occurring
f. If the Ethernet cables between switch DLS2 and switch ALS1 were severed, Payroll
Host would not be able to reach SQL server - Answer-e. By setting different priorities on
different VLANs, a type of load balancing is occurring.
When should a proactive management be performed within the stages of the Cisco
Lifecycle Services?
, a. prepare phase
b. plan phase
c. design phase
d. implement phase
e. operate phase
f. optimize phase - Answer-f. optimize phase
What type of queuing provides the best quality for voice applications?
a. custom queuing
b. FIFO queuing
c. priority queuing
d. weighted round robin (WRR) queuing - Answer-c. priority queuing
Which statement is true concerning the core layer within the hierarchical design model?
a. Remote users are granted access to the network through the core
b. Routing should be configured without traffic filtering, address translation, or other
packet manipulation at the core
c. The core, which acts as the front door to a network, is designed to prevent
unauthorized users from gaining entry
d. The core provides an optimized and reliable transport structure by using a
combination of route summaries, distribution lists, and route maps - Answer-b. Routing
should be configured without traffic filtering, address translation, or other packet
manipulation at the core.
When a port security violation occurs on a switch port, the switch sends a syslog
message but does not shut down the port. What port security mode is in effect?
a. sticky
b. shutdown
c. restrict
d. protect - Answer-c. restrict
Refer to the exhibit. The indicated configuration was established on the HSRP standby
router RTB. However, the console message %IP-4-DUPADDR started appearing almost
immediately on the RTB router. Given the output of the show standby brief command on
RTA, what is the cause of the problem?
a. The command standby preempt should only be applied on the active router
b. The subnet mask is missing from the standby ip 10.1.1.1 command
c. The group number 50 is missing in the Router RTB configuration command
d. The priority number 150 is missing in the Router RTB configuration commands
e. The virtual IP address should be the same as the active router
