CPSI EXAM PREP 2025 UPDATED QUESTIONS
WITH COMPLETE SOLUTIONS!!
Circular use zone where swing motion occurs cannot overlap to a distance
of________________. Answer - Y + 72"
(y = vertical distance from the top of sitting surface to pivot point)
The front and rear use zone where swing motion occurs cannot overlap for a
distance of ______ to both the front and the rear. Answer - 2x
x = the vertical distance from the protective surface to the pivot point of the
swing.
What is the handhold length of a seated rocking equipment ? Answer - min.
length 3"
Wheelchair accessible platform:
The openings in platform, and between edge and railing may not exceed
______" horizontal opening Answer - 1/2" (0.5")
What is the minimum side use zone for a rotating swing support structure?
Answer - 72"
Comprehensive program of playground safety includes.... Answer - - audits
-inspections
-maintenance
,What does the middle projection gauge measure? Answer - projection
entering brain thru eye socket
What does the large projection gauge measure? Answer - soft tissue damage
such as bruise or ruptured organs in abdominal area
What is the max height of a balance beam? Answer - 12" max hgt for 2-5 yo
16" max hgt for 5-12 yo
What is min overlap use zone for To-Fro Swing support structure? Answer - 72"
What is the dowel size of the crush/shear test probe on Merry - Go - Rounds?
Answer - 0.30" (5/16")
Entanglement hazards:
If connecting devices that have in-fill such as plastic or cable that completely
fills the interior space of both loops preventing entry items of clothing, is this
exempt? Answer - YES
What is the minimum footrest length of a seated spring rocking equipment?
Answer - 3 1/2"
What is the dowel size of crush / sheer hazards with movement? Answer -
0.62" (5/8")
Partially Bound Openings:
The template is considered fully inserted if it goes below the top of the opening
more than ____" Answer - 3/4" (0.75")
, What is the minimum diameter of hand gripping components? Answer - 0.95"
What is the dowel diameter for roller slides? Answer - 0.19" (3/16")
What is the minimum diameter of handrails? Answer - 0.95"
What is the diameter of a medium dowel? Answer - .30" (5/16")
What is the distance from the platform to the sliding pole? Answer - 18"-20"
Stepping forms must be stationary when they are ________________ Answer -
>30"
What is the distance between stepping platforms? Answer - PS 12" max
SA 18" max
What are track ride platform dimensions (when used)? Answer - Min depth
36"
Min width 32"
Max platform hgt 36" for SA users
Upper body equipment can be used by children ___ and up Answer - 4
What is the handrail (stair) height for PS age children? Answer - 22"-26"
How many swings per bay? Answer - 2
WITH COMPLETE SOLUTIONS!!
Circular use zone where swing motion occurs cannot overlap to a distance
of________________. Answer - Y + 72"
(y = vertical distance from the top of sitting surface to pivot point)
The front and rear use zone where swing motion occurs cannot overlap for a
distance of ______ to both the front and the rear. Answer - 2x
x = the vertical distance from the protective surface to the pivot point of the
swing.
What is the handhold length of a seated rocking equipment ? Answer - min.
length 3"
Wheelchair accessible platform:
The openings in platform, and between edge and railing may not exceed
______" horizontal opening Answer - 1/2" (0.5")
What is the minimum side use zone for a rotating swing support structure?
Answer - 72"
Comprehensive program of playground safety includes.... Answer - - audits
-inspections
-maintenance
,What does the middle projection gauge measure? Answer - projection
entering brain thru eye socket
What does the large projection gauge measure? Answer - soft tissue damage
such as bruise or ruptured organs in abdominal area
What is the max height of a balance beam? Answer - 12" max hgt for 2-5 yo
16" max hgt for 5-12 yo
What is min overlap use zone for To-Fro Swing support structure? Answer - 72"
What is the dowel size of the crush/shear test probe on Merry - Go - Rounds?
Answer - 0.30" (5/16")
Entanglement hazards:
If connecting devices that have in-fill such as plastic or cable that completely
fills the interior space of both loops preventing entry items of clothing, is this
exempt? Answer - YES
What is the minimum footrest length of a seated spring rocking equipment?
Answer - 3 1/2"
What is the dowel size of crush / sheer hazards with movement? Answer -
0.62" (5/8")
Partially Bound Openings:
The template is considered fully inserted if it goes below the top of the opening
more than ____" Answer - 3/4" (0.75")
, What is the minimum diameter of hand gripping components? Answer - 0.95"
What is the dowel diameter for roller slides? Answer - 0.19" (3/16")
What is the minimum diameter of handrails? Answer - 0.95"
What is the diameter of a medium dowel? Answer - .30" (5/16")
What is the distance from the platform to the sliding pole? Answer - 18"-20"
Stepping forms must be stationary when they are ________________ Answer -
>30"
What is the distance between stepping platforms? Answer - PS 12" max
SA 18" max
What are track ride platform dimensions (when used)? Answer - Min depth
36"
Min width 32"
Max platform hgt 36" for SA users
Upper body equipment can be used by children ___ and up Answer - 4
What is the handrail (stair) height for PS age children? Answer - 22"-26"
How many swings per bay? Answer - 2
