MSF Basic eCourse: About Basic Operation ACTUAL
EXAM QUESTIONS WITH COMPLETE SOLUTION
GUIDE (A+ GRADED 100% VERIFIED) LATEST
VERSION 2025!!
FINE-C - (ANSWER)FINE-C refers to an engine pre-start routine. It stands for Fuel,
Ignition, Neutral, Engine cut-off switch, Choke and Clutch.
F - (ANSWER)Fuel, means if equipped, turn the fuel supply valve On.
I - (ANSWER)Ignition, means turn the ignition switch to the On position. Some
indicator lights should come on.
N - (ANSWER)Neutral, means to be in Neutral. The green light in the instrument
cluster "indicates" neutral. When in neutral, the motorcycle will roll forward and
backward with the clutch lever and front brake lever released.
E - (ANSWER)Engine cut-off switch means put the switch in the Run/On position.
C - (ANSWER)Choke and Clutch, means to set the choke and squeeze in the clutch
lever. The choke should be On for a cold engine, although some motorcycles do
not have a choke.
Engine start procedure - (ANSWER)When starting the engine: Apply at least one
of the brakes.
, Squeeze in the clutch lever fully.
Press the starter button.
Do not use the throttle if the choke is On as this could provide too much fuel to
the engine.
Once the engine is started, you can release the clutch lever, but do so slowly in
case the motorcycle is not in neutral.
Some engines will not start if the side stand is down. Many motorcycles will allow
the engine to start but will stall when the motorcycle is shifted into gear when the
side stand is down.
Engine stop procedure - (ANSWER)To stop the engine:
First, move the engine cut-off switch to Off with your right thumb. Do this every
time so you can develop the habit in case you need to shut off the engine in an
emergency.
Turn the ignition switch to Off.
Turn the fuel supply valve Off if it has that position.
It may help to remember the Engine Stop Procedure as Thumb, Key, Valve.
EXAM QUESTIONS WITH COMPLETE SOLUTION
GUIDE (A+ GRADED 100% VERIFIED) LATEST
VERSION 2025!!
FINE-C - (ANSWER)FINE-C refers to an engine pre-start routine. It stands for Fuel,
Ignition, Neutral, Engine cut-off switch, Choke and Clutch.
F - (ANSWER)Fuel, means if equipped, turn the fuel supply valve On.
I - (ANSWER)Ignition, means turn the ignition switch to the On position. Some
indicator lights should come on.
N - (ANSWER)Neutral, means to be in Neutral. The green light in the instrument
cluster "indicates" neutral. When in neutral, the motorcycle will roll forward and
backward with the clutch lever and front brake lever released.
E - (ANSWER)Engine cut-off switch means put the switch in the Run/On position.
C - (ANSWER)Choke and Clutch, means to set the choke and squeeze in the clutch
lever. The choke should be On for a cold engine, although some motorcycles do
not have a choke.
Engine start procedure - (ANSWER)When starting the engine: Apply at least one
of the brakes.
, Squeeze in the clutch lever fully.
Press the starter button.
Do not use the throttle if the choke is On as this could provide too much fuel to
the engine.
Once the engine is started, you can release the clutch lever, but do so slowly in
case the motorcycle is not in neutral.
Some engines will not start if the side stand is down. Many motorcycles will allow
the engine to start but will stall when the motorcycle is shifted into gear when the
side stand is down.
Engine stop procedure - (ANSWER)To stop the engine:
First, move the engine cut-off switch to Off with your right thumb. Do this every
time so you can develop the habit in case you need to shut off the engine in an
emergency.
Turn the ignition switch to Off.
Turn the fuel supply valve Off if it has that position.
It may help to remember the Engine Stop Procedure as Thumb, Key, Valve.