USPA Skydiving B License Study Guide with Complete
Solutions
What is the first priority of your pull priorities? - under canopy you should... - ANSWER -
ANSWER -Pull-you must deploy the Turn right
parachute
Below 10,000 feet MSL, each jumper must
What is the second priority of your pull priorities? maintain at least how much vertical distance
- ANSWER -Pull at the proper altitude below any cloud? - ANSWER -500 feet
below
What is the third priority of your pull priorities? -
ANSWER -Pull at proper altitude when What is the quickest and safest way to change
stable heading immediately after opening your
parachute? - ANSWER -Make a rear riser
turn with the brakes stowed
You should check your altitude every time you...
(3 things) - ANSWER -All are correct (5
seconds have passed, you complete a task, Under canopy, braked turns... - ANSWER -
encounter difficulty) ...Provide a heading change while losing the least
amount of altitude.
What is the first priority of your landing priorities?
- ANSWER -Land with the wing level What may result if a jumper is recovering altitude
(floating up) under a freefall formation? -
ANSWER -Collision with the formation
What is the second priority of your landing
priorities? - ANSWER -Land in a clear and
open area The minimum break-off altitude for belly-to-earth
formation groups of five or fewer during a
daytime skydive should be at least: -
What is the third priority of your landing ANSWER -1,500 feet higher than the
priorities? - ANSWER -Flare to at least the highest planned deployment altitude for a group
half-brake position
When performing front riser maneuvers, what
To prevent a collision with another jumper under should you do with the steering toggles? -
canopy... - ANSWER -Look before you turn ANSWER -Keep them (steering toggles) in
your hands
The jumper under canopy that has the right-of-
way is... - ANSWER -The lower jumper A USPA B-License holder who has not jumped
for more than 90 days should... -
ANSWER -Make at least one jump under
When approaching another jumper head on the direct supervision of a USPA instructional
rating holder
1/4
Solutions
What is the first priority of your pull priorities? - under canopy you should... - ANSWER -
ANSWER -Pull-you must deploy the Turn right
parachute
Below 10,000 feet MSL, each jumper must
What is the second priority of your pull priorities? maintain at least how much vertical distance
- ANSWER -Pull at the proper altitude below any cloud? - ANSWER -500 feet
below
What is the third priority of your pull priorities? -
ANSWER -Pull at proper altitude when What is the quickest and safest way to change
stable heading immediately after opening your
parachute? - ANSWER -Make a rear riser
turn with the brakes stowed
You should check your altitude every time you...
(3 things) - ANSWER -All are correct (5
seconds have passed, you complete a task, Under canopy, braked turns... - ANSWER -
encounter difficulty) ...Provide a heading change while losing the least
amount of altitude.
What is the first priority of your landing priorities?
- ANSWER -Land with the wing level What may result if a jumper is recovering altitude
(floating up) under a freefall formation? -
ANSWER -Collision with the formation
What is the second priority of your landing
priorities? - ANSWER -Land in a clear and
open area The minimum break-off altitude for belly-to-earth
formation groups of five or fewer during a
daytime skydive should be at least: -
What is the third priority of your landing ANSWER -1,500 feet higher than the
priorities? - ANSWER -Flare to at least the highest planned deployment altitude for a group
half-brake position
When performing front riser maneuvers, what
To prevent a collision with another jumper under should you do with the steering toggles? -
canopy... - ANSWER -Look before you turn ANSWER -Keep them (steering toggles) in
your hands
The jumper under canopy that has the right-of-
way is... - ANSWER -The lower jumper A USPA B-License holder who has not jumped
for more than 90 days should... -
ANSWER -Make at least one jump under
When approaching another jumper head on the direct supervision of a USPA instructional
rating holder
1/4
