IPC Practice Exam #3 questions well
answered passed
What is the maximum temperature wastewater can be when discharged into the building
drainage system? - correct answer ✔✔140ºF
Cleanout plugs shall have what type of head - correct answer ✔✔Raised square head
Countersunk square head
Countersunk slot head
A vertical pipe to which connections are made from the fixture side of a trap and through which
vapor is removed from a device utilized on bedpan washers is known as a(n)
__________________. - correct answer ✔✔Local vent stack
A horizontal stack offset is located five branch intervals below the top of the stack. A horizontal
branch interval shall not connect within __________________ feet above or below such offset.
- correct answer ✔✔2
Cleanouts in a crawl space, where the height of such space is less than _______________
inches, shall extend through and out to the surface of the wall providing easy access. - correct
answer ✔✔24
What size pipe is required for a building drain on 1/16" slope accepting discharge from 2,700
fixture units? - correct answer ✔✔12"
Joints between a cast iron and brass shall be made with all of the following except
__________________. - correct answer ✔✔Welded joint
answered passed
What is the maximum temperature wastewater can be when discharged into the building
drainage system? - correct answer ✔✔140ºF
Cleanout plugs shall have what type of head - correct answer ✔✔Raised square head
Countersunk square head
Countersunk slot head
A vertical pipe to which connections are made from the fixture side of a trap and through which
vapor is removed from a device utilized on bedpan washers is known as a(n)
__________________. - correct answer ✔✔Local vent stack
A horizontal stack offset is located five branch intervals below the top of the stack. A horizontal
branch interval shall not connect within __________________ feet above or below such offset.
- correct answer ✔✔2
Cleanouts in a crawl space, where the height of such space is less than _______________
inches, shall extend through and out to the surface of the wall providing easy access. - correct
answer ✔✔24
What size pipe is required for a building drain on 1/16" slope accepting discharge from 2,700
fixture units? - correct answer ✔✔12"
Joints between a cast iron and brass shall be made with all of the following except
__________________. - correct answer ✔✔Welded joint
