Cathy wants to connect to her wireless LAN at home but is not sure where to change
the setting so that she can connect.
Where in the Windows Control Panel will Cathy find her computer's network
connection settings?
a. Network Control Center
b. Administrative Tools
c. Network and Sharing Center
d. Internet Options
Give this one a try later!
, Network and Sharing Center
A processor housing that contains more than one processor is referred to as what
term?
a. Multihoused processor
b. Multicore processor
c. Multithreaded processor
d. Multiprocessor platform
Give this one a try later!
Multicore processor
You are installing a new hard drive in a system in which the hard drive will run at
6.0Gbps.
What can you use to determine whether the SATA port no which you are connecting
the drive will also run at 6.0Gbps?
a. UEFI/BIOS will provide the standard.
b. Motherboard manual.
c. All ports are standard.
d. Hard drive driver.
Give this one a try later!
Motherboard manual.
What is the connector called on a network cable that connects to an Ethernet port?
,Give this one a try later!
RJ45
What is the very first step that should be taken when performing work with a
computer?
a. You should ground yourself.
b. You should remove the power supply.
c. You should back up any important data.
d. You should power down the system and unplug it.
Give this one a try later!
c. You should back up any important data.
Heather is troubleshooting a computer at her worksite. She has interviewed the
computer's user and is currently trying to reproduce the problem the user described.
Heather is in which step of the troubleshooting process?
a. Verify full system functionality.
b. Test the theory to determine a cause.
c. Establish a theory of probable cause.
d. Identify the problem.
Give this one a try later!
C. establish a theory of probable cause
, You recently installed a new RAID controller card in a PCIe expansion slot on your
computer. After setting up the controller, you transfer data from the backup you
created over to the computer. When you finish the setup, you turn the computer off
and return it to its normal location. When you turn the computer on, you immediately
receive the error message, "RAID not found."
What might be the problem?
a. Motherboard could not support the RAID controller.
b. Expansion card failed or became unseated.
c. Hard drives in the RAID have failed.
d. Power supply could not support the RAID controller.
Give this one a try later!
Expansion card failed or became unseated.
A mobile device you are troubleshooting is experiencing a sharp decrease in
performance after an hour of operation. The user powers the device off each evening,
and when it is powered on, performance returns to normal. After an hour of
operation, performance degrades.
Which of the following is the best action to take to resolve this issue?
Give this one a try later!
Close or disable all unused running apps.
Mary, a remote user, connects her Windows 10 laptop to the corporate network by
way of the Internet using a VPN tunnel.
Which of the following is often configured as a required step for a user each time she
the setting so that she can connect.
Where in the Windows Control Panel will Cathy find her computer's network
connection settings?
a. Network Control Center
b. Administrative Tools
c. Network and Sharing Center
d. Internet Options
Give this one a try later!
, Network and Sharing Center
A processor housing that contains more than one processor is referred to as what
term?
a. Multihoused processor
b. Multicore processor
c. Multithreaded processor
d. Multiprocessor platform
Give this one a try later!
Multicore processor
You are installing a new hard drive in a system in which the hard drive will run at
6.0Gbps.
What can you use to determine whether the SATA port no which you are connecting
the drive will also run at 6.0Gbps?
a. UEFI/BIOS will provide the standard.
b. Motherboard manual.
c. All ports are standard.
d. Hard drive driver.
Give this one a try later!
Motherboard manual.
What is the connector called on a network cable that connects to an Ethernet port?
,Give this one a try later!
RJ45
What is the very first step that should be taken when performing work with a
computer?
a. You should ground yourself.
b. You should remove the power supply.
c. You should back up any important data.
d. You should power down the system and unplug it.
Give this one a try later!
c. You should back up any important data.
Heather is troubleshooting a computer at her worksite. She has interviewed the
computer's user and is currently trying to reproduce the problem the user described.
Heather is in which step of the troubleshooting process?
a. Verify full system functionality.
b. Test the theory to determine a cause.
c. Establish a theory of probable cause.
d. Identify the problem.
Give this one a try later!
C. establish a theory of probable cause
, You recently installed a new RAID controller card in a PCIe expansion slot on your
computer. After setting up the controller, you transfer data from the backup you
created over to the computer. When you finish the setup, you turn the computer off
and return it to its normal location. When you turn the computer on, you immediately
receive the error message, "RAID not found."
What might be the problem?
a. Motherboard could not support the RAID controller.
b. Expansion card failed or became unseated.
c. Hard drives in the RAID have failed.
d. Power supply could not support the RAID controller.
Give this one a try later!
Expansion card failed or became unseated.
A mobile device you are troubleshooting is experiencing a sharp decrease in
performance after an hour of operation. The user powers the device off each evening,
and when it is powered on, performance returns to normal. After an hour of
operation, performance degrades.
Which of the following is the best action to take to resolve this issue?
Give this one a try later!
Close or disable all unused running apps.
Mary, a remote user, connects her Windows 10 laptop to the corporate network by
way of the Internet using a VPN tunnel.
Which of the following is often configured as a required step for a user each time she
