Module 2 asphalt/concrete Questions and Answers Best rated A+ Guaranteed Success Latest Update

A composite material that is prepared in a hot-mix plant and used for construction of highway, parking lot, or airfield pavements capable of supporting high traffic load volumes and axle loads. asphalt cement A rock crusher in which a steel center cone rotates eccentrically to crush the material against the outside cylindrical steel wall. gyratory crushers It is a bituminous material that is produced by distillation of petroleum crude oil. asphalt cement 8/8/25, 4:04 PM Module 2 asphalt/concrete Flashcards | Quizlet shapes placed longitudinally inside the shell of a drum dryer or mixture. As the material moves through the drum, the flight first lift the aggregate and then tumble it through the hot gases. Flights The top surface layer of an asphalt pavement, usually less than 1 in. thick, to improve skid resistance and smoothness. friction course Two long arms extending forward from each side of the asphalt paver screed and attached to tow points on the tractor. This mechanical connection enables the screed to float on the asphalt mix during placement. leveling arms Joints for the purpose of regulating cracking from the unavoidable and unpredictable contraction of concrete. contraction joints 8/8/25, 4:04 PM Module 2 asphalt/concrete Flashcards | Quizlet produced in a plant where aggregates are heated and dried and then combined with hot liquid asphalt cement and placed at high temperature. hot-mix asphla