CNOR Sterile Processing Exam.

CNOR Sterile Processing Exam. 1. How much time and at what temp does Pre-Vacuum Dynamic Air re- moval require? 2. How much time and at what temp does gravity displacement require? 3. How much time and at what temp does Gluteraldeahyde Cidex require? 4. How much time and at what temp does Ethylene oxide require? 5. How much time and at what temp does Hydrogen peroxide plasma ster- rad require? 6. How much time and at what temp does Peracetic Acid steris require? 7. How much time and at what temp does ozone 03 require? 8. How much time and at what temp does dry heat require? 9. Wet or Dry: pre-vacuum dynamic air removal 270F Porus/lumen- 4 min Nonporous- 3 min 270F P/L- 10 min NonP- 3 min Low 10 hours Low 2-5 hours 8-12 hours aeration Low 75 min 120-130F 20-30 minutes Low 90 min High (340F) Varies (60 min standard) wet 10. Wet or Dry: Gravity Displacement Wet 11. Wet or Dry: Guteraldeahyde Cidex Wet 12. Wet or Dry: Ethylene Oxide Dry (uses aeration) 13. Wet or Dry: Hydrogen Peroxide Plas- ma Sterrad Dry 14. Wet or Dry: Peracetic Acid Steris Wet 15. Wet or Dry: Ozone 03 Dry 16. Wet or Dry: Dry Heat Dry 17. Pre-vacuum Dynamic air removal is good for... Metal 18. Gravity Displacement is good for... metal 19. Gluteraldeahyde Cidex is good for... Point of care 20. Ethylene oxide is good for... heat and moisture sensitive items 21. Hydrogen peroxide plasma sterrad is good for... heat and moisture sensitive items (Does not work well on lumens) 22. Peracetic Acid Steris is good for point of care items that can be immersed 23. Ozone 03 is good for metal and plastic 24. Dry heat is good for Heat stable powders (talc), oils, reusable needles, glassware, burrs, dental instruments 25. What testing is used for pre vacuum dynamic air removal? 26. What testing is used for gravity dis- placement? Geobacillus Stearothermophilus