CSPT Exam #2 2025/2026 Exam
Questions and Verified Answers |
Already Graded A+
hypo/hyperthermia machine - 🧠ANSWER ✔✔patient cooling machine.
sequential compression device - 🧠ANSWER ✔✔equipment used in the prevention
of blood clots.
before being disinfected, patient care equipment should be - 🧠ANSWER
✔✔cleaned with detergent.
the disinfectant recommended by the equipment manufacturer for: - 🧠ANSWER
✔✔patient care equipment
final preparation of patient care equipment - 🧠ANSWER ✔✔1. checking of cords
and plugs for signs of damage. 2. checking of the date of last safety check. 3.
lubrication of movable parts.
,biomedical engineering department - 🧠ANSWER ✔✔send anything damaged
patient care equipment that is soiled needs to be - 🧠ANSWER ✔✔contained during
transport.
400 series stainless steel is used for such instruments as - 🧠ANSWER ✔✔scissors,
forceps, osteotomes and chisels.
retractors - 🧠ANSWER ✔✔hold back tissue or organs.
weakest part of the instrument is/are - 🧠ANSWER ✔✔box lock
most difficult part of a hemostat to clean? - 🧠ANSWER ✔✔ratchet
final stage of manufacturing a surgical-grade instrument is called - 🧠ANSWER
✔✔passivation
scissors with black handles are often referred to as - 🧠ANSWER ✔✔super sharps
the layer on a surgical instrument that is created by the passivation process is
called - 🧠ANSWER ✔✔chromium oxide
how is an instrument with tungsten carbide inserts identified? - 🧠ANSWER
✔✔gold handles
, what type of finish on a surgical instrument is used for laser prcedures? -
🧠ANSWER ✔✔ebonized.
which of the following lubricants is recommended for use on surgical instruments?
- 🧠ANSWER ✔✔water-based.
the chromium oxide layer is intended to make an instrument - 🧠ANSWER
✔✔resistant to corrosion
routine inspection of instruments - 🧠ANSWER ✔✔jaw alignment, rachet tension,
box lock stiffness.
unless otherwise directed by the manufacturer, an instrument should be lubricated -
🧠ANSWER ✔✔every time its used.
when testing a scissor for sharpness it is important to - 🧠ANSWER ✔✔make
several vuts in the testing material.
when the jaws of a stainless steel needle driver becomes worn, the needle driver
must be - 🧠ANSWER ✔✔discarded.
a crack in a hand held instrument would most likely be found in the - 🧠ANSWER
✔✔box lock
COPYRIGHT©JOSHCLAY 2025/2026. YEAR PUBLISHED 2025. COMPANY REGISTRATION NUMBER: 619652435. TERMS OF USE. PRIVACY
3
STATEMENT. ALL RIGHTS RESERVED
Questions and Verified Answers |
Already Graded A+
hypo/hyperthermia machine - 🧠ANSWER ✔✔patient cooling machine.
sequential compression device - 🧠ANSWER ✔✔equipment used in the prevention
of blood clots.
before being disinfected, patient care equipment should be - 🧠ANSWER
✔✔cleaned with detergent.
the disinfectant recommended by the equipment manufacturer for: - 🧠ANSWER
✔✔patient care equipment
final preparation of patient care equipment - 🧠ANSWER ✔✔1. checking of cords
and plugs for signs of damage. 2. checking of the date of last safety check. 3.
lubrication of movable parts.
,biomedical engineering department - 🧠ANSWER ✔✔send anything damaged
patient care equipment that is soiled needs to be - 🧠ANSWER ✔✔contained during
transport.
400 series stainless steel is used for such instruments as - 🧠ANSWER ✔✔scissors,
forceps, osteotomes and chisels.
retractors - 🧠ANSWER ✔✔hold back tissue or organs.
weakest part of the instrument is/are - 🧠ANSWER ✔✔box lock
most difficult part of a hemostat to clean? - 🧠ANSWER ✔✔ratchet
final stage of manufacturing a surgical-grade instrument is called - 🧠ANSWER
✔✔passivation
scissors with black handles are often referred to as - 🧠ANSWER ✔✔super sharps
the layer on a surgical instrument that is created by the passivation process is
called - 🧠ANSWER ✔✔chromium oxide
how is an instrument with tungsten carbide inserts identified? - 🧠ANSWER
✔✔gold handles
, what type of finish on a surgical instrument is used for laser prcedures? -
🧠ANSWER ✔✔ebonized.
which of the following lubricants is recommended for use on surgical instruments?
- 🧠ANSWER ✔✔water-based.
the chromium oxide layer is intended to make an instrument - 🧠ANSWER
✔✔resistant to corrosion
routine inspection of instruments - 🧠ANSWER ✔✔jaw alignment, rachet tension,
box lock stiffness.
unless otherwise directed by the manufacturer, an instrument should be lubricated -
🧠ANSWER ✔✔every time its used.
when testing a scissor for sharpness it is important to - 🧠ANSWER ✔✔make
several vuts in the testing material.
when the jaws of a stainless steel needle driver becomes worn, the needle driver
must be - 🧠ANSWER ✔✔discarded.
a crack in a hand held instrument would most likely be found in the - 🧠ANSWER
✔✔box lock
COPYRIGHT©JOSHCLAY 2025/2026. YEAR PUBLISHED 2025. COMPANY REGISTRATION NUMBER: 619652435. TERMS OF USE. PRIVACY
3
STATEMENT. ALL RIGHTS RESERVED
