Written by students who passed Immediately available after payment Read online or as PDF Wrong document? Swap it for free 4.6 TrustPilot
logo-home
Document preview thumbnail
Preview 4 out of 53 pages
Exam (elaborations)

HAZMAT TECH 1 VERSION 1 ACTUAL EXAM 2025/2026 COMPLETE QUESTIONS WITH CORRECT, DETAILED ANSWERS (VERIFIED) | GRADED A+ | BRAND NEW VERSION!!

Document preview thumbnail
Preview 4 out of 53 pages

HAZMAT TECH 1 VERSION 1 ACTUAL EXAM 2025/2026 COMPLETE QUESTIONS WITH CORRECT, DETAILED ANSWERS (VERIFIED) | GRADED A+ | BRAND NEW VERSION!! The main purpose for monitoring and detection equipment is: A. identifying and verifying. B. determining appropriate levels of PPE. C. setting hot zone boundaries. D. assessing potential health effects. A. identifying and verifying. The process of using a shaped charge to cut a hole in a pressurized tank and allowing it to safely burn off is called: A. hot tapping B. thermal exploitation. C. positive ventilation. D. vent and burn. D. vent and burn. When sampling air, _________ is the common reading used to determine exposure guidelines and values. A. PPH B. PPM C. PPB D. PPT B. PPM Radiation that can be stopped by a piece of paper is known as _________ particles. A. alpha B. low-beta C. high-beta D. gamma A. alpha Sodium hydroxide and potassium hydroxide are best described as: A. polymers B. catalysts C. acids D. bases D. bases A(n) __________ has the ability to pass through human tissue and travel great distances. A. alpha particle B. beta particle C. immobilizing ray D. gamma ray D. gamma ray Lead and ethylene oxide materials that pose a threat to a developing fetus should an exposure occur are best known as: A. etiologicals B. mutagens C. teratogens D. synergens C. teratogens Exposure to radiation should be avoided, but when it cannot be, a total dose not to exceed _____ roentgens is permissible for any single life-threatening emergency. A. 25 B. 30 C. 50 D. 100 A. 25 When dealing with a radio-logical incident involving a leak or spill, what exposure guidelines should the Hazardous Materials/WMD Technician use to minimize radioactive contamination? A. Time, distance, half-life B. Ionizing radiation, non-ionizing radiation, half-life C. Time, distance, shielding D. Alpha particles, beta particles, gamma rays C. Time, distance, shielding __________is the taking of hazardous materials into the body through the skin and the eyes. A. Absorption B. Ingestion C. Inhalation D. Injection A. Absorption Directions: Read the statements below, then select your answer alternatives A-D below. Statement 1: Gamma radiation is the most difficult form of radiation to shield. Statement 2: Alpha radiation is not harmful to the body. Statement 3: Gamma radiation does not travel very far. A. All statements are true. B. Statement 1 is true; statements 2 and 3 are false. C. Statement 1 is false; statements 2 and 3 are true. D. Statements 1 and 2 are true; statement 3 is false. B. Statement 1 is true; statements 2 and 3 are false. One gram of aspirin is a accepted dose for medicinal purposes, yet quantities in excess of 10 grams have caused death. This is an example of: A. dose/response B. toxicology C. exposure D. concentration A. dose/response The minimum concentration of a chemical in the gaseous state that, when inhaled, will be fatal to 50% of the population is: A. TLV50 B. LD50 C. LC50 D. CL50 C. LC50 The concentration that should not be exceeded, even for an instant, is called: A. TLV-C B. PEL C. TLV-TWA D. STEL A. TLV-C Which of the following cooling systems are not typically used for response applications? A. ice cooled vests B. liquid-cooled vests C. air-cooled jackets D. all of the above C. air-cooled jackets A person who proved specific expertise in product and/or containers is the: A. Incident Commander B. Hazardous Materials/WMD Technician C. Technical Information Specialist D. CHEMTREC C. Technical Information Specialist Records produced as a result of a debriefing best serve the purpose of documenting: A. the equipment and apparatus exposure review. B. the discussion of health information. C. problems requiring immediate action. D. all of the above are correct. D. all of the above are correct. When dealing with radiation, it is important to remember this rule: When distance from the radiation source is doubled, the safety factor is increased by a margin of: A. two B. four C. six D. eight B. four The amounts of an ingested substance that result in the death of 50% of the test population best defines: A. LC50 B. LC10 C. LD50 D. IDLH C. LD50 Which of the following values represents an atmosphere that poses an immediate hazard to life or the potential to produce immediate, irreversible, debilitating effects on health? A. TLV-TWA B. IDLH C. REL D. PEL B. IDLH Which of the following exposure values could be repeated during an 8-hour work day a maximum of four times for 15 minutes with a 60-minute rest period between exposures? A. IDLH B. TLV-TWA C. TLV-STEL D. TLV-C C. TLV-STEL The maximum airborne concentration to which an average healthy person may be exposed 8 hours a week best defines: A. TLV- TWA B. TLV-STEL C. IDLH D. TLV-C A. TLV- TWA A one percent concentration of a substance in air is equal to 10,000: A. PPM B. PPB C. PPT D. PPH A. PPM The "rem" is a unit that measures: A. radioactive contamination B. the number of nuclear decays that occur during a specific time C. radiation exposure or dose D. rapid energy movement C. radiation exposure or dose The minimum amount of a solid or liquid that may be fatal when ingested or absorbed through the skin is known as: A. the ceiling limit B. LDL-lo C. STEL D. LC50 B. LDL-lo

Content preview

HAZMAT TECH 1 VERSION 1 ACTUAL EXAM 2025/2026 COMPLETE
QUESTIONS WITH CORRECT, DETAILED ANSWERS (VERIFIED) |
GRADED A+ | BRAND NEW VERSION!!
The main purpose for monitoring and detection equipment is:

A. identifying and verifying.
B. determining appropriate levels of PPE.
C. setting hot zone boundaries.
D. assessing potential health effects.
A. identifying and verifying.
The process of using a shaped charge to cut a hole in a pressurized tank and
allowing it to safely burn off is called:
A. hot tapping
B. thermal exploitation.
C. positive ventilation.
D. vent and burn.
D. vent and burn.
When sampling air, _________ is the common reading used to determine exposure
guidelines and values.

A. PPH
B. PPM
C. PPB
D. PPT
B. PPM
Radiation that can be stopped by a piece of paper is known as _________ particles.

A. alpha
B. low-beta
C. high-beta
D. gamma

,A. alpha
Sodium hydroxide and potassium hydroxide are best described as:

A. polymers
B. catalysts
C. acids
D. bases
D. bases
A(n) __________ has the ability to pass through human tissue and travel great
distances.

A. alpha particle
B. beta particle
C. immobilizing ray
D. gamma ray
D. gamma ray
Lead and ethylene oxide materials that pose a threat to a developing fetus should
an exposure occur are best known as:

A. etiologicals
B. mutagens
C. teratogens
D. synergens
C. teratogens
Exposure to radiation should be avoided, but when it cannot be, a total dose not to
exceed _____ roentgens is permissible for any single life-threatening emergency.

A. 25
B. 30
C. 50
D. 100

,A. 25
When dealing with a radio-logical incident involving a leak or spill, what exposure
guidelines should the Hazardous Materials/WMD Technician use to minimize
radioactive contamination?

A. Time, distance, half-life
B. Ionizing radiation, non-ionizing radiation, half-life
C. Time, distance, shielding
D. Alpha particles, beta particles, gamma rays
C. Time, distance, shielding
__________is the taking of hazardous materials into the body through the skin and
the eyes.

A. Absorption
B. Ingestion
C. Inhalation
D. Injection
A. Absorption
Directions: Read the statements below, then select your answer alternatives A-D
below.

Statement 1: Gamma radiation is the most difficult form of radiation to shield.

Statement 2: Alpha radiation is not harmful to the body.

Statement 3: Gamma radiation does not travel very far.

A. All statements are true.
B. Statement 1 is true; statements 2 and 3 are false.
C. Statement 1 is false; statements 2 and 3 are true.
D. Statements 1 and 2 are true; statement 3 is false.
B. Statement 1 is true; statements 2 and 3 are false.

, One gram of aspirin is a accepted dose for medicinal purposes, yet quantities in
excess of 10 grams have caused death. This is an example of:

A. dose/response
B. toxicology
C. exposure
D. concentration
A. dose/response
The minimum concentration of a chemical in the gaseous state that, when inhaled,
will be fatal to 50% of the population is:

A. TLV50
B. LD50
C. LC50
D. CL50
C. LC50
The concentration that should not be exceeded, even for an instant, is called:

A. TLV-C
B. PEL
C. TLV-TWA
D. STEL
A. TLV-C
Which of the following cooling systems are not typically used for response
applications?

A. ice cooled vests
B. liquid-cooled vests
C. air-cooled jackets
D. all of the above

Document information

Uploaded on
August 1, 2025
Number of pages
53
Written in
2025/2026
Type
Exam (elaborations)
Contains
Questions & answers
$15.49

Wrong document? Swap it for free Within 14 days of purchase and before downloading, you can choose a different document. You can simply spend the amount again.
Written by students who passed
Immediately available after payment
Read online or as PDF

Seller avatar
NurseQueen1
4.7
(3)
Sold
4
Followers
0
Items
196
Last sold
8 months ago


Why students choose Stuvia

Created by fellow students, verified by reviews

Quality you can trust: written by students who passed their tests and reviewed by others who've used these notes.

Didn't get what you expected? Choose another document

No worries! You can instantly pick a different document that better fits what you're looking for.

Pay as you like, start learning right away

No subscription, no commitments. Pay the way you're used to via credit card and download your PDF document instantly.

Student with book image

“Bought, downloaded, and aced it. It really can be that simple.”

Alisha Student

Working on your references?

Create accurate citations in APA, MLA and Harvard with our free citation generator.

Working on your references?

Frequently asked questions