quiz 5 manual transmissions certification exam questions and answers.

Technician A says the purpose of a lockup piston clutch is to improve fuel economy Technician B says a lockup piston clutch is designed with a damper assembly to transmit driving torque and absorb shock. who is correct? A B A & B Neither - correct answer A&B What is not a component of the TCC? damper assembly piston plate clutch friction plate roller clutch - correct answer roller clutch The multiplier of torque converter fluid power is the_____________? - correct answer stator To boost transmission line pressure, throttle pressure is applied to the___________? - correct answer pressure regulator spool valve whenever two members of a simple planetary gear set are locked together the output will be direct drive true. false - correct answer true all automatic transaxles use a simple planetary gear set true false - correct answer false Which of the following pressure increases as road speed increases converter governor throttle line - correct answer governor Which of the following torque converter components connect to the transmissions input shaft impeller stator turbine output shaft - correct answer turbine when a son gear is the input member in the planetary When the sun gear is the input member and the planetary carrier is held, the ring (internal/annulus) gear will be driven at a forward overdrive speed. true false - correct answer alse A ravigneaux planetary carrier contains both long and short planet pinions true false - correct answer true the valve body assembly is comprised of the valve body, separator plate, and transfer plate true false - correct answer true To achieve a slow forward overdrive in a simple planetary gear set the _______? - correct answer planetary carrier must be the input member overrunning clutches are capable of________? - correct answer Both "holding a planetary gear member stationary" and "driving a planetary gear member" ALL the following are components of the torque converter EXCEPT impeller rotor stator turbine - correct answer rotor Which of the following torque converter components is attached to the engine flywheel impeller stator turbine - correct answer impeller at coupling speed the overrunning clutch in the torque converter is rotating forward rotating backwards stationary none of these answers - correct answer rotating forward which of the following is not part of a lockup torque converter? damper assembly clutch friction plate piston plate servo springs - correct answer servo springs which of the following is not a type of pump used in automatic transmission? gear centrifugal rotor vane - correct answer centrifugal Planetary gear sets are being discussed. Technician A says any of the three members can be used as the driving or input member. Technician B says the drive or output member is always the ring gear. who is correct? A B A&B NEITHER - correct answer A the function of automatic transmission fluid is to_______? lubricate shaft, bearings, and gears cool transmissions parts transmit hydraulic pressure all answers are correct - correct answer all answers are correct a CVT transmission uses ________ to provide speed reduction and torque multiplication. planetary gear set belt and pulley helical external gears on parallel shafts a hydraulic turbine with variable stator blades - correct answer belt and pulley what manufacturer makes Automatic transaxles that do not use planetary gears and are similar in construction and operation to manual transaxles? Chrysler Toyota and Lexus honda and Acura Volkswagen and Audi - correct answer honda and acura in a simple planetary gear set, when the planetary carrier is held the gear set produces a ________? direct drive reverse reverse and direct neither - correct answer reverse Technician A says if the sun and ring gear are both driven (locked) and the carrier is the output, the condition is drive. Technician B says if the carrier and the sun are both driven and the ring gear is the output, the condition is direct drive. Who is correct? A B A&B