BISCSI TECHNICIAN EXAM-ACTUAL EXAM-LATEST
UPDATE |COMPLETE QUESTIONS WITH CORRECT
DETAILED AND VERIFIED ANSWERS-MOSTLY TESTED
QUESTIONS| RATED 100% CORRECT!! GUARANTEED
PASS!! ALREADY GRADED A+
L Rating - ...(ANSWERS)....A firestops ability to provide a smoke stop. (air leakage
rate)
To avoid damaging cable jacket, how often must you securely fasten electrical
nonmetallic tubing (ENT) - ...(ANSWERS)....3 Feet so it does not damage the cable
What is the minimum dedicated power requirement of a telecommunications
enclosure - ...(ANSWERS)....120 V ac/20
The clearance behind the PBB when mounted, should be no less than- -
...(ANSWERS)....2inch clearance behind the PBB when mounted
When installing a plywood backboard, you should use galvanized screws that are
a minimum of ______ longer than the depth of the wall covering, including the
plywood - ...(ANSWERS)....0.5in
The use of under carpet telecommunications cable should be limited to: -
...(ANSWERS)....The interconnection point between horizontal cabling and UTC is
a transition point (TP)
, Two 90-degree bends are allowed in any one conduit segment. A third bend may
be acceptable under certain situations - ...(ANSWERS)....Runs under 33 feet
When installing racks and cabinets on an access floor, what should they be
secured to? - ...(ANSWERS)....The frame
When placing cabinets on an access floor, how should the cabinets be aligned? -
...(ANSWERS)....One edge flush with the floor tile cut line
What is a telecommunications enclosure TE used for? - ...(ANSWERS)....May be
used to provide a suitable option for moves, adds, and changes without
compromising infection control measures and other restrictions
What size threaded rod would you typically use in a heavy duty ladder rack
installation? - ...(ANSWERS)....5/8in
A supplemental bonding network within an ER or data center consisting of a set of
conductors formed into a grid is often associated with what? -
...(ANSWERS)....Access flooring
Which type of anchor requires a hole to be drilled into the floor where the
attachment is to be made? - ...(ANSWERS)....Expansion anchors
Min seperation from electric motors and transformers? - ...(ANSWERS)....48"
UPDATE |COMPLETE QUESTIONS WITH CORRECT
DETAILED AND VERIFIED ANSWERS-MOSTLY TESTED
QUESTIONS| RATED 100% CORRECT!! GUARANTEED
PASS!! ALREADY GRADED A+
L Rating - ...(ANSWERS)....A firestops ability to provide a smoke stop. (air leakage
rate)
To avoid damaging cable jacket, how often must you securely fasten electrical
nonmetallic tubing (ENT) - ...(ANSWERS)....3 Feet so it does not damage the cable
What is the minimum dedicated power requirement of a telecommunications
enclosure - ...(ANSWERS)....120 V ac/20
The clearance behind the PBB when mounted, should be no less than- -
...(ANSWERS)....2inch clearance behind the PBB when mounted
When installing a plywood backboard, you should use galvanized screws that are
a minimum of ______ longer than the depth of the wall covering, including the
plywood - ...(ANSWERS)....0.5in
The use of under carpet telecommunications cable should be limited to: -
...(ANSWERS)....The interconnection point between horizontal cabling and UTC is
a transition point (TP)
, Two 90-degree bends are allowed in any one conduit segment. A third bend may
be acceptable under certain situations - ...(ANSWERS)....Runs under 33 feet
When installing racks and cabinets on an access floor, what should they be
secured to? - ...(ANSWERS)....The frame
When placing cabinets on an access floor, how should the cabinets be aligned? -
...(ANSWERS)....One edge flush with the floor tile cut line
What is a telecommunications enclosure TE used for? - ...(ANSWERS)....May be
used to provide a suitable option for moves, adds, and changes without
compromising infection control measures and other restrictions
What size threaded rod would you typically use in a heavy duty ladder rack
installation? - ...(ANSWERS)....5/8in
A supplemental bonding network within an ER or data center consisting of a set of
conductors formed into a grid is often associated with what? -
...(ANSWERS)....Access flooring
Which type of anchor requires a hole to be drilled into the floor where the
attachment is to be made? - ...(ANSWERS)....Expansion anchors
Min seperation from electric motors and transformers? - ...(ANSWERS)....48"
