Exam Questions and Detailed Answers |
Get it 100% Correct Answers
A. Remove endangered occupants and treat the injured
B. Stabilize the incident and provide for life safety
C. Protect property
D. Provide for the safety, accountability, and welfare of personnel - 🧠 ANSWER
✔✔The Incident Commander is responsible for the completion of the incident
priorities. The incident priorities (in order of priority)
Modes of command - 🧠 ANSWER ✔✔A. Investigative mode (nothing showing)
B. Fast attack mode
C. Command mode (stationary command post)
Minimum tools carried when in investigative mode - 🧠 ANSWER ✔✔Portable
extinguisher and halligan/flathead axe set
,Fast attack mode - 🧠 ANSWER ✔✔Used when fire conditions are present and the
initial IC believes his direct involvement will be beneficial for the attack
When in fast attack mode, next arriving units go to - 🧠 ANSWER ✔✔Level One
staging
Initial command in the fast attack mode should not last more than a few minutes
and will end with one of the following: - 🧠 ANSWER ✔✔A. Situation is stabilized
B. Command is transferred from the fast attack company officer/initial IC to a later
arriving commanding officer
C. If the situation is not stabilized, the fast attack company officer/initial IC must
move to the exterior, stationary command position and switch to command mode
If the initial IC is operating in command mode, the following are options are
available with regards to remaining crew members - 🧠 ANSWER ✔✔1 "move up"
an acting officer within the company
2 assign crew members to perform staff functions to assist the IC
3 assign crew members to another company
When a chief officer arrives at the same time as the initial arriving company - 🧠
ANSWER ✔✔The chief should assume command of the incident
COPYRIGHT©BLAIRALISTERNEWTON 2025/2026. YEAR PUBLISHED 2025. COMPANY REGISTRATION NUMBER: 619652435. TERMS OF USE.
2
PRIVACY STATEMENT. ALL RIGHTS RESERVED
, Components of an IRR - 🧠 ANSWER ✔✔1 clear the alarm
2 building/area description
3 problem description and location
4 initial incident action plan (IAP)
5 declare the incident strategy
6 resource determination to dispatch
7 assume and name command
Components of building/area description - 🧠 ANSWER ✔✔1 size
2 height
3 occupancy type
Components of problem description/location - 🧠 ANSWER ✔✔1 nothing showing
2 light smoke showing
3 working fire
4 defensive fire conditions
Components of an initial IAP - 🧠 ANSWER ✔✔1 tasks of initial arriving units
2 location of the tasks
COPYRIGHT©BLAIRALISTERNEWTON 2025/2026. YEAR PUBLISHED 2025. COMPANY REGISTRATION NUMBER: 619652435. TERMS OF USE.
3
PRIVACY STATEMENT. ALL RIGHTS RESERVED