LADWP FINAL EXAM STUDY GUIDE TEST.
1. Pole steps 135 deg apart
No less than 9' to first
step
36" space between
steps on same side
2. Vertical clearance between the lowest 4' from cross arms and
energized part of equipment ex- tended racks
cut-outs or line disconnects and 0-750 volt conductors 6' from 3
spool rack
attached Reference Rules
to: 58.1C, and 58.3A
3. Pole risers • Priority 1 - Keep ris-
er(s) outside of the
climb- ing space.
•Priority 2 - Place on
op- posite side of
pole
from oncoming traflc,
if not possible to
maintain climbing
space place the risers
facing traflc.
•Priority 3 - Best
remain- ing location to
accommo- date
direction of conduit, if
riser(s) are to be
placed on the street
side of the pole, the
distance between the
1/
47
,LADWP FINAL EXAM STUDY GUIDE TEST.
face of the riser and
the curb face should
preferably be 18" if
possible, but no less
than 12".
2/
47
, LADWP FINAL EXAM STUDY GUIDE TEST.
4. High volt signs approximately 30" below
the lowest line conductor
energized in excess of 75
volts
6" below the equipment
and above all
secondary
conductors and
com
approximately 30 inches
below the lowest
exposed energized
portion of the
pothead.
5. Guy make ups YBOG
Yellow- 1/4" 2375
Black- 5/16"
Orange 3/8"
5400
Green 7/16" 7250
6. Service make ups #4 orange ORYOG
#2 red 1/0
yellow
3/0 orange 336
green
7. Bullet colors 8 sol brown
6 sol green
3/
47
, LADWP FINAL EXAM STUDY GUIDE TEST.
8. 34.5 mid span lateral Min 35' from pole
Reduced tension span
not
4/
47
1. Pole steps 135 deg apart
No less than 9' to first
step
36" space between
steps on same side
2. Vertical clearance between the lowest 4' from cross arms and
energized part of equipment ex- tended racks
cut-outs or line disconnects and 0-750 volt conductors 6' from 3
spool rack
attached Reference Rules
to: 58.1C, and 58.3A
3. Pole risers • Priority 1 - Keep ris-
er(s) outside of the
climb- ing space.
•Priority 2 - Place on
op- posite side of
pole
from oncoming traflc,
if not possible to
maintain climbing
space place the risers
facing traflc.
•Priority 3 - Best
remain- ing location to
accommo- date
direction of conduit, if
riser(s) are to be
placed on the street
side of the pole, the
distance between the
1/
47
,LADWP FINAL EXAM STUDY GUIDE TEST.
face of the riser and
the curb face should
preferably be 18" if
possible, but no less
than 12".
2/
47
, LADWP FINAL EXAM STUDY GUIDE TEST.
4. High volt signs approximately 30" below
the lowest line conductor
energized in excess of 75
volts
6" below the equipment
and above all
secondary
conductors and
com
approximately 30 inches
below the lowest
exposed energized
portion of the
pothead.
5. Guy make ups YBOG
Yellow- 1/4" 2375
Black- 5/16"
Orange 3/8"
5400
Green 7/16" 7250
6. Service make ups #4 orange ORYOG
#2 red 1/0
yellow
3/0 orange 336
green
7. Bullet colors 8 sol brown
6 sol green
3/
47
, LADWP FINAL EXAM STUDY GUIDE TEST.
8. 34.5 mid span lateral Min 35' from pole
Reduced tension span
not
4/
47
