1 | Page
MARYLAND ASBESTOS
EXAM QUESTIONS AND ANSWERS 2025
The lean ratio of an extension ladder - correct answer- 4:1
According to AHERA, to complete a response action of a non-
NESHAP size project, how many samples must be taken with
results of what? - correct answer- 5 samples taken inside with
results of each <0.0 f/cc
What are the notification requirements in Virginia? - correct
answer- 20 calendar days for any project greater than 10 sq
feet or linear feet
In what jurisdiction do individuals need an asbestos supervisor
or working linsense - correct answer- Need a license
everywhere
Type of bond that would ensure that the general contractor will
compensate subcontractors for labor and materials - correct
answer- Performance Bond
, 2 | Page
Minimum respiratory protection on a class 1 asbestos project
with no NEA - correct answer- Full face air purifying respirator
What is the maximum content permitted in the work area where
an air purifying respirator is being worn? - correct answer-
23.5%
Chest XRays must be evaluated by what class reader? -
correct answer- Class B
What is the APF for a full face air purifying respirator - correct
answer- 50
Friable ACM is any material that can be: - correct answer-
Crushed, pulverized, reduced to powder by hand pressure
when dry
The OSHA permissible exposure limit is - correct answer- 0.1
f/cc over 8 hours TWA
MARYLAND ASBESTOS
EXAM QUESTIONS AND ANSWERS 2025
The lean ratio of an extension ladder - correct answer- 4:1
According to AHERA, to complete a response action of a non-
NESHAP size project, how many samples must be taken with
results of what? - correct answer- 5 samples taken inside with
results of each <0.0 f/cc
What are the notification requirements in Virginia? - correct
answer- 20 calendar days for any project greater than 10 sq
feet or linear feet
In what jurisdiction do individuals need an asbestos supervisor
or working linsense - correct answer- Need a license
everywhere
Type of bond that would ensure that the general contractor will
compensate subcontractors for labor and materials - correct
answer- Performance Bond
, 2 | Page
Minimum respiratory protection on a class 1 asbestos project
with no NEA - correct answer- Full face air purifying respirator
What is the maximum content permitted in the work area where
an air purifying respirator is being worn? - correct answer-
23.5%
Chest XRays must be evaluated by what class reader? -
correct answer- Class B
What is the APF for a full face air purifying respirator - correct
answer- 50
Friable ACM is any material that can be: - correct answer-
Crushed, pulverized, reduced to powder by hand pressure
when dry
The OSHA permissible exposure limit is - correct answer- 0.1
f/cc over 8 hours TWA
