ASNT ULTRASONIC LEVEL I EXAM NEWEST
2025 ACTUAL EXAM COMPLETE 170
QUESTIONS AND CORRECT DETAILED
ANSWERS (VERIFIED ANSWERS) |ALREADY
GRADED A+ BRAND NEW!!
ASNT ULTRASONIC LEVEL I EXAM NEWEST
2025 ACTUAL EXAM COMPLETE 170
QUESTIONS AND CORRECT DETAILED
ANSWERS (VERIFIED ANSWERS) |ALREADY
GRADED A+ BRAND NEW!!
Figure 2 illustrates a contact test on. 203mm (8 in) aluminum
block. A discontinuity is located 152mm (6in) from the front
surface. The display representation for this is shown to the right.
What does indication A represent?
A. The initial pulse or front surface indication
B. the first discontinuity indication
C. The first back surface reflection
D. Baseline
The initial pulse or front surface indication
In figure 2, indication B represents:
A: the initial pulse or front surface indication
,ASNT ULTRASONIC LEVEL I EXAM NEWEST
2025 ACTUAL EXAM COMPLETE 170
QUESTIONS AND CORRECT DETAILED
ANSWERS (VERIFIED ANSWERS) |ALREADY
GRADED A+ BRAND NEW!!
B. the first discontinuity indication
C: the first back-surface reflection
D: baseline the first discontinuity
indication
In figure 2, indication C represents the:
A: second back surface reflection
B: first discontinuity indication
C: second indication of the discontinuity
D: first back surface reflection first back
surface reflection
In figure 2, indication D represents the:
A: first discontinuity indication
B: second indication of the discontinuity
C: first back-surface reflection
D: second back-surface reflection second indication
of the discontinuity
,ASNT ULTRASONIC LEVEL I EXAM NEWEST
2025 ACTUAL EXAM COMPLETE 170
QUESTIONS AND CORRECT DETAILED
ANSWERS (VERIFIED ANSWERS) |ALREADY
GRADED A+ BRAND NEW!!
In figure 2, indication E represents the:
A: first discontinuity indication
B: second indication of the discontinuity
C: first back-surface reflection D:
second back-surface reflection
second back surface reflection
The velocity of longitudinal waves is approximately ________ the
velocity of shear waves in the same material.
two times
Figure 3 illustrates an immersion test of a 76 mm (3 in) block of
aluminum with a discontinuity located 51 mm (2 in) below the
surface. The display pattern is shown also. What does indication
A represent? Assume no sweep delay is used.
A: first front surface indication
B: the initial pulse
C: the first discontinuity indication
, ASNT ULTRASONIC LEVEL I EXAM NEWEST
2025 ACTUAL EXAM COMPLETE 170
QUESTIONS AND CORRECT DETAILED
ANSWERS (VERIFIED ANSWERS) |ALREADY
GRADED A+ BRAND NEW!!
D: the first back-surface indication
The initial pulse
In figure 3, indication B represents the:
A: first front surface indication
B: the initial pulse
C: the first discontinuity indication
D: the first back-surface indication
First front surface indication
In figure 3, indication C represents:
A: first front surface indication
B: first discontinuity indication
C: first back-surface reflection D:
second front surface indication
first discontinuity indication
The indication on the instrument display that represents the far
boundary of the material being tested is called: the back surface
2025 ACTUAL EXAM COMPLETE 170
QUESTIONS AND CORRECT DETAILED
ANSWERS (VERIFIED ANSWERS) |ALREADY
GRADED A+ BRAND NEW!!
ASNT ULTRASONIC LEVEL I EXAM NEWEST
2025 ACTUAL EXAM COMPLETE 170
QUESTIONS AND CORRECT DETAILED
ANSWERS (VERIFIED ANSWERS) |ALREADY
GRADED A+ BRAND NEW!!
Figure 2 illustrates a contact test on. 203mm (8 in) aluminum
block. A discontinuity is located 152mm (6in) from the front
surface. The display representation for this is shown to the right.
What does indication A represent?
A. The initial pulse or front surface indication
B. the first discontinuity indication
C. The first back surface reflection
D. Baseline
The initial pulse or front surface indication
In figure 2, indication B represents:
A: the initial pulse or front surface indication
,ASNT ULTRASONIC LEVEL I EXAM NEWEST
2025 ACTUAL EXAM COMPLETE 170
QUESTIONS AND CORRECT DETAILED
ANSWERS (VERIFIED ANSWERS) |ALREADY
GRADED A+ BRAND NEW!!
B. the first discontinuity indication
C: the first back-surface reflection
D: baseline the first discontinuity
indication
In figure 2, indication C represents the:
A: second back surface reflection
B: first discontinuity indication
C: second indication of the discontinuity
D: first back surface reflection first back
surface reflection
In figure 2, indication D represents the:
A: first discontinuity indication
B: second indication of the discontinuity
C: first back-surface reflection
D: second back-surface reflection second indication
of the discontinuity
,ASNT ULTRASONIC LEVEL I EXAM NEWEST
2025 ACTUAL EXAM COMPLETE 170
QUESTIONS AND CORRECT DETAILED
ANSWERS (VERIFIED ANSWERS) |ALREADY
GRADED A+ BRAND NEW!!
In figure 2, indication E represents the:
A: first discontinuity indication
B: second indication of the discontinuity
C: first back-surface reflection D:
second back-surface reflection
second back surface reflection
The velocity of longitudinal waves is approximately ________ the
velocity of shear waves in the same material.
two times
Figure 3 illustrates an immersion test of a 76 mm (3 in) block of
aluminum with a discontinuity located 51 mm (2 in) below the
surface. The display pattern is shown also. What does indication
A represent? Assume no sweep delay is used.
A: first front surface indication
B: the initial pulse
C: the first discontinuity indication
, ASNT ULTRASONIC LEVEL I EXAM NEWEST
2025 ACTUAL EXAM COMPLETE 170
QUESTIONS AND CORRECT DETAILED
ANSWERS (VERIFIED ANSWERS) |ALREADY
GRADED A+ BRAND NEW!!
D: the first back-surface indication
The initial pulse
In figure 3, indication B represents the:
A: first front surface indication
B: the initial pulse
C: the first discontinuity indication
D: the first back-surface indication
First front surface indication
In figure 3, indication C represents:
A: first front surface indication
B: first discontinuity indication
C: first back-surface reflection D:
second front surface indication
first discontinuity indication
The indication on the instrument display that represents the far
boundary of the material being tested is called: the back surface
