FIREFIGHTER 2 FINAL EXAM 2 LATEST VERSIONS AND A PRACTICE EXAM NEWEST 2024 ACTUAL EXAM
400 QUESTIONS AND CORRECT DETAILED ANSWERS
Which pneumatic tools are often used for delicate cutting operations and can cut case hardened locks
and steel? - (answer) Whizzer saws
Which proportioning method uses an external pump or head pressure to force foam concentrate into
the fire stream at the correct ratio for the water flow? - (answer) Premixing method
What is the term used to describe forward velocity pressure at a discharge opening while water is
flowing? - (answer) Flow pressure
Which of the following is NOT a question that would be asked concerning appliances during a residential
fire safety survey?
Are surge protectors being used?
Are appliances name brand?
Are electrical cords in good condition?
Are the units operating properly? - (answer) are appliances name brand?
Which type of pressure can be measured with a pitot tube and gauge? - (answer) Flow pressure
Proportioning methods: When would batch mixing not be effective? - (answer) On large incidents
because attack lines must be shut down when refilling an empty tank.
Water applied to ordinary combustibles usually _______. - (answer) Reduce flame spread
Which type of valves are used to control the flow from the hydrant? - (answer) Gate valves
The _____ the wood, the easier to ignite and the faster it loses structural integrity. - (answer) Smaller
The threads on pump male discharge outlets are protected by fittings called _____ _____. - (answer)
Hose caps
, FIREFIGHTER 2 FINAL EXAM 2 LATEST VERSIONS AND A PRACTICE EXAM NEWEST 2024 ACTUAL EXAM
400 QUESTIONS AND CORRECT DETAILED ANSWERS
Who should begin stabilization of a patient trapped inside a vehicle? - (answer) A rescuer with EMT
training
Name one element of patient removal: - (answer) Covering sharp edges
Fixed-temperature heat detectors rated at _____(*f)(*c) are common for living spaces. - (answer) 165 |
76
Cribbing is most commonly used to _________. - (answer) stabilize objects
Which type of test should be preformed by private contractors or fire department personnel? -
(answer) Standard testing
Which proportioning method is used with portable extinguishers, wheeled, extinguishers, skid-mounted
twin-agent units, and vehicle mounted tank systems? - (answer) Premixing method
One of the most important practices to address to building occupants about fire safety is _______. -
(answer) making sure to maintain clear and unobstructed exit pathways
Normal pressure exiting a system before water is released from a hydrant is called ______. - (answer)
Static presssure
Energy created by moving parts on machines, such as belts and bearings - (answer) Mechanical heat
energy
Water received from treatment facilities is delivered to ________ storage tanks before being distributed
throughout the area served. - (answer) elevated
State 3 facts about service testing: - (answer) 1. The test area should be smooth and free from rock and
debris
400 QUESTIONS AND CORRECT DETAILED ANSWERS
Which pneumatic tools are often used for delicate cutting operations and can cut case hardened locks
and steel? - (answer) Whizzer saws
Which proportioning method uses an external pump or head pressure to force foam concentrate into
the fire stream at the correct ratio for the water flow? - (answer) Premixing method
What is the term used to describe forward velocity pressure at a discharge opening while water is
flowing? - (answer) Flow pressure
Which of the following is NOT a question that would be asked concerning appliances during a residential
fire safety survey?
Are surge protectors being used?
Are appliances name brand?
Are electrical cords in good condition?
Are the units operating properly? - (answer) are appliances name brand?
Which type of pressure can be measured with a pitot tube and gauge? - (answer) Flow pressure
Proportioning methods: When would batch mixing not be effective? - (answer) On large incidents
because attack lines must be shut down when refilling an empty tank.
Water applied to ordinary combustibles usually _______. - (answer) Reduce flame spread
Which type of valves are used to control the flow from the hydrant? - (answer) Gate valves
The _____ the wood, the easier to ignite and the faster it loses structural integrity. - (answer) Smaller
The threads on pump male discharge outlets are protected by fittings called _____ _____. - (answer)
Hose caps
, FIREFIGHTER 2 FINAL EXAM 2 LATEST VERSIONS AND A PRACTICE EXAM NEWEST 2024 ACTUAL EXAM
400 QUESTIONS AND CORRECT DETAILED ANSWERS
Who should begin stabilization of a patient trapped inside a vehicle? - (answer) A rescuer with EMT
training
Name one element of patient removal: - (answer) Covering sharp edges
Fixed-temperature heat detectors rated at _____(*f)(*c) are common for living spaces. - (answer) 165 |
76
Cribbing is most commonly used to _________. - (answer) stabilize objects
Which type of test should be preformed by private contractors or fire department personnel? -
(answer) Standard testing
Which proportioning method is used with portable extinguishers, wheeled, extinguishers, skid-mounted
twin-agent units, and vehicle mounted tank systems? - (answer) Premixing method
One of the most important practices to address to building occupants about fire safety is _______. -
(answer) making sure to maintain clear and unobstructed exit pathways
Normal pressure exiting a system before water is released from a hydrant is called ______. - (answer)
Static presssure
Energy created by moving parts on machines, such as belts and bearings - (answer) Mechanical heat
energy
Water received from treatment facilities is delivered to ________ storage tanks before being distributed
throughout the area served. - (answer) elevated
State 3 facts about service testing: - (answer) 1. The test area should be smooth and free from rock and
debris
