ICC Vapor Recovery 1 Pt. 2 Exam|Brand New Expert Exam Questions With Clear Correct Verified Answers|All Graded A+|Latest Premium Update()|100% Guaranteed Success.

ICC Vapor Recovery 1 Pt. 2 Exam|Brand New Expert Exam Questions With Clear Correct Verified Answers|All Graded A+|Latest Premium Update()|100% Guaranteed Success. Under Dispenser Containment is required to be designed and constructed in accordance with ____. a. the appropriate Executive Order b. generally accepted secondary containment practices c. standards of an independent testing organization with industry code d. an engineering specification approved by a state registered professional engineer or engineering standard - Answerc. standards of an independent testing organization with industry code With a Gilbarco Vapor-Vac, the OPW 12VW nozzle has a hole or tear in the vapor escape guard, it is a defect if ____% of the circumference is missing. a. 25% b. 75% c. 50% d. 65% - Answerb. 75% Gasoline thread sealant can be used on all except _____. a. threaded portion of rotatable adapters b. p/v valve c. ball float d. riser adapter - Answera. threaded portion of rotatable adapters when installing copper tubing use all except _____. a. copper tubing cutter b. copper bending tool c. copper flaring tool d. copper stretching tool - Answerd. copper stretching tool The Husky P/V valve has a torque range of... a. 50-75 lbs b. 20-50 lbs c. 30-50 lbs d. 40-50 lbs - Answerb. 20-50 lbs When installing the hanging hardware together use... a. pipe dope b. non-hardening sealant c. teflon tape d. oil or grease - Answerd. oil or grease When installing in the EO VR-101-E you should have on site _____. a. the executive order b. Phil-tite installation manual c. the equipment checklist d. all the above - Answerd. all the above There are four ball valves on the clean air separator, what position are they to be in? a. top and bottom valve open, the rest are closed b. top and bottom valve closed, the rest are open c. top valve open, the rest are closed d. bottom valve open, the rest are closed - Answerc. top valve open, the rest are closed The drop tube used in EO #VR-101-E is the a. OPW 61SO-PT b. Phil-Tite 61SO-PT c. EBW 61SO-PT d. VST 61SO-PT - Answerb. Phil-Tite 61SO-PT When reconnecting a breakaway after a drive off you must a. be a certified technician b. log the incident into the GDF (Gross Dispensing Facility) maintenance log c. call the local air district d. call 911 - Answerb. log the incident into the GDF maintenance log Per CCR (CA Code of Regulations), Title 23 - UST Regulations, the minimum capacity of a spill bucket is _____ gallons a. 5 b. 3 1/2 c. 7 d. 10 - Answera. 5 All vapor return lines after the first manifold from the dispenser shall have a minimum diameter of _____ inches. a. 2" b. 3" c. 4" d. 1 1/2" - Answerb. 3"