Advanced PLCs Test 1 (Module 1 to 3) Questions and Answers Latest 2025
PLCs provide a means of controlling machines and other industrial
application with a(n) ___________________ instead of using hard wired
devices.
industrial computer
A PLC requires much less _____ than a hard wired relay panel that could do
the same job.
space
The six basic components of most PLCs are the power supply, the input and
output modules, the processors module, the programming device, and the
___________.
I/O chassis
A(n) __________ network is a high speed communications connection used to
exchange data between production line equipment and other devices within a
manufacturing facility.
industrial
The three network levels are Enterprise, Automation and _______, and Field
Device.
Control
_______________ uses several protocols to convert data from its native
format, such as a text message, into a format that can be sent and tracked
from the source node to the destination node of a network.
Ethernet TCP/IP
Ethernet/IP uses the ___ (protocol) to produce a network suitable for use
on automation and control level.
CIP
, Advanced PLCs Test 1 (Module 1 to 3) Questions and Answers Latest 2025
A PLC and PC are connected in a(n) ______________ network using a single
Ethernet cable.
point-to-point
Two addresses are used for Ethernet communications: Media Access Control
(MAC) and ______________________.
Internet Protocol (IP)
_______ are software programs that allow a device to connect to a network
and communicate with other devices.
Drivers
The IP address of a CompactLogix PLC that already has an IP address is
viewed and edited using ______ communications software.
RSLinx
The basic operation of a(n) ___ is to scan instructions, monitor the status
of input devices, and produce outputs based on which inputs are on or off.
PLC
All PLCs must have a(n) ______________________ to operate.
user developed project
A(n) __ is used to download hardware configurations and programs to a PLC.
PC
A() _______ is a file that contains a hardware configuration and control
program.
project
__________ is a network search utility that shows the layout of every
network that has a driver configured in RSLinx.
PLCs provide a means of controlling machines and other industrial
application with a(n) ___________________ instead of using hard wired
devices.
industrial computer
A PLC requires much less _____ than a hard wired relay panel that could do
the same job.
space
The six basic components of most PLCs are the power supply, the input and
output modules, the processors module, the programming device, and the
___________.
I/O chassis
A(n) __________ network is a high speed communications connection used to
exchange data between production line equipment and other devices within a
manufacturing facility.
industrial
The three network levels are Enterprise, Automation and _______, and Field
Device.
Control
_______________ uses several protocols to convert data from its native
format, such as a text message, into a format that can be sent and tracked
from the source node to the destination node of a network.
Ethernet TCP/IP
Ethernet/IP uses the ___ (protocol) to produce a network suitable for use
on automation and control level.
CIP
, Advanced PLCs Test 1 (Module 1 to 3) Questions and Answers Latest 2025
A PLC and PC are connected in a(n) ______________ network using a single
Ethernet cable.
point-to-point
Two addresses are used for Ethernet communications: Media Access Control
(MAC) and ______________________.
Internet Protocol (IP)
_______ are software programs that allow a device to connect to a network
and communicate with other devices.
Drivers
The IP address of a CompactLogix PLC that already has an IP address is
viewed and edited using ______ communications software.
RSLinx
The basic operation of a(n) ___ is to scan instructions, monitor the status
of input devices, and produce outputs based on which inputs are on or off.
PLC
All PLCs must have a(n) ______________________ to operate.
user developed project
A(n) __ is used to download hardware configurations and programs to a PLC.
PC
A() _______ is a file that contains a hardware configuration and control
program.
project
__________ is a network search utility that shows the layout of every
network that has a driver configured in RSLinx.
