OSHA 510 study guide
0 degree F - ANS - Is temperature a concern when manufacturing a rollover protective system
on material handling equipment?
\0.1 - ANS - What is the 8 hour TWA for asbestos?
\10' - ANS - At what height is fall protection required on a built-up scaffold (Fabricated frame
scaffold)
\100ft - ANS - What is the maximum travel distance to get a fire extinguisher?
\10ft Mechanical Equipment - ANS - What is the required distance for a warning line to be
placed from the roof edge when mechanical equipment is being used?
\11 C - ANS - What section of the "Act" is for protecting workers from discrimination or retaliation
when they file a complaint about safety?
\15' - ANS - At what height must employees other than connectors and controlled decking zone
employees be protected?
\1910.134 - ANS - You are the Safety Director for MMM company. You are requiring the use of
respirators. What standard do you use for guidelines?
\1910.178 (1926.602C) - ANS - What OSHA regulation must be followed for training lift truck
operators?
\1926.250 A2 - ANS - What are the requirements when storing on a floor other than slab or
grade?
\1926.251 A1 - Every shift, before use and as needed - ANS - When should rigging equipment
be inspected?
\1926.300 B4 where work is performed. - ANS - What is the definition of point of operation?
\1970 - ANS - What year was the Occupational Safety and Health Act signed into law?
\20-30" - ANS - When can the cross bracing on a scaffold be used as a midrail?
\20' or Barrier 5' High and 1/2 fire - ANS - What are the requirements for separation of oxygen
from fuel gas to combustibles?
\3.5' Max deceleration - ANS - What are the requirements for stopping an employee using a
personal fall arrest system?
\3" - ANS - In order for a person to safely grab a handrail on temporary stairs, how far must the
handrail be from the wall?
\30ft max - ANS - At what height must connectors and controlled decking zone employees be
protected by fall protection?
\42" +or- 3 - ANS - What are the height requirements for a guardrail system?
\5' - ANS - At what depth must employee protection be provided in a trench?
\50 volts or more shall be guarded. - ANS - What is the maximum voltage of live parts of electric
equipment above which they must be guarded against accidental contact?
\85/90 - ANS - At what level of noise must the company provide hearing protection?
\A person on site trained in emergency procedure and first aid. - ANS - Does this section have
emergency procedures requirement? If so, what are they?
\A= 3/4:1 53
B= 1:1 45
0 degree F - ANS - Is temperature a concern when manufacturing a rollover protective system
on material handling equipment?
\0.1 - ANS - What is the 8 hour TWA for asbestos?
\10' - ANS - At what height is fall protection required on a built-up scaffold (Fabricated frame
scaffold)
\100ft - ANS - What is the maximum travel distance to get a fire extinguisher?
\10ft Mechanical Equipment - ANS - What is the required distance for a warning line to be
placed from the roof edge when mechanical equipment is being used?
\11 C - ANS - What section of the "Act" is for protecting workers from discrimination or retaliation
when they file a complaint about safety?
\15' - ANS - At what height must employees other than connectors and controlled decking zone
employees be protected?
\1910.134 - ANS - You are the Safety Director for MMM company. You are requiring the use of
respirators. What standard do you use for guidelines?
\1910.178 (1926.602C) - ANS - What OSHA regulation must be followed for training lift truck
operators?
\1926.250 A2 - ANS - What are the requirements when storing on a floor other than slab or
grade?
\1926.251 A1 - Every shift, before use and as needed - ANS - When should rigging equipment
be inspected?
\1926.300 B4 where work is performed. - ANS - What is the definition of point of operation?
\1970 - ANS - What year was the Occupational Safety and Health Act signed into law?
\20-30" - ANS - When can the cross bracing on a scaffold be used as a midrail?
\20' or Barrier 5' High and 1/2 fire - ANS - What are the requirements for separation of oxygen
from fuel gas to combustibles?
\3.5' Max deceleration - ANS - What are the requirements for stopping an employee using a
personal fall arrest system?
\3" - ANS - In order for a person to safely grab a handrail on temporary stairs, how far must the
handrail be from the wall?
\30ft max - ANS - At what height must connectors and controlled decking zone employees be
protected by fall protection?
\42" +or- 3 - ANS - What are the height requirements for a guardrail system?
\5' - ANS - At what depth must employee protection be provided in a trench?
\50 volts or more shall be guarded. - ANS - What is the maximum voltage of live parts of electric
equipment above which they must be guarded against accidental contact?
\85/90 - ANS - At what level of noise must the company provide hearing protection?
\A person on site trained in emergency procedure and first aid. - ANS - Does this section have
emergency procedures requirement? If so, what are they?
\A= 3/4:1 53
B= 1:1 45
