NEIEP 100 Final Review Exam Questions With Accurate
Solutions.
How to turn Kg to Lbs - accurate answers-Multiply by 2.2
How to turn Lbs to Kg - accurate answers-Divide by 2.2
Wheat types of detail drawings would you expect to see on a elevator
installation job - accurate answers-Standardized, electrical, structural and
hoistway drawings
Installing hoistway limit switches what drawing will the mechanic reference -
accurate answers-Standardized detail drawing
Where should you place a lifeline when installing them - accurate answers-
close enough to permit tying off prior to entering
millimeters to inches - accurate answers-divide by 25.4
Inches to millimeters - accurate answers-multiply by 25.4
Drawings that are approved by the building owner or representative are
labeled with what term - accurate answers-Final
In a standard orthographic projection drawing, where is the placement of a
back view if needed - accurate answers-Off to one side of the working drawing
What is the most common drawing method for showing three sides of an
object at once in the elevator industry - accurate answers-Isometric Drawing
How would you describe a class 3 fit for shaft and bore diameters - accurate
answers-Snuggest possible allowance
Which class of bolts provides the highest level of precision - accurate answers-
Class 3 bolts
What is the difference between U.S standard and metric standard threads? -
accurate answers-U.S. standard measures threads per inch; metric standard
measures by pitch of the threads
, Which tool would be needed to remove an internal snap ring - accurate
answers-Internal snap ring pliers
The DBG on the elevator counterweight rails is 33 1/2 what is the metric
equivalent of this dimension - accurate answers-850.9mm
What type of drawing presents a 3 sided view of an object - accurate answers-
Orthographic drawing
When erecting a scaffold, what type of fall protection can be used in addition
to a personal fall arrest system - accurate answers-Guardrail system built with
tubular steel
What scaffold hazards are among the most serious - accurate answers-Falls,
unsafe access, scaffold collapse
What mnemonic can be used to help remember the five most serious scaffold
hazards - accurate answers-FUSES
You are the only subcontractor on site. While erecting a scaffold, who serves
as the safety officer? - accurate answers-The scaffolder
The employer is looking for someone who is experienced and has the
authority and knowledge to identify safety hazards who is this? - accurate
answers-A competent person
To keep a rolling scaffold from racking, what must be installed - accurate
answers-a horizontal or diagonal brace
Which terms describe two-point suspended scaffolds used by elevator
constructors - accurate answers-Power platforms and swing stages
What are the three major parts of the power platform suspended system -
accurate answers-Platform, hoist, and ropes
A suspended scaffold contains 3 basic systems which hold, hand and protect.
What are these systems - accurate answers-Support system, suspended
system and safety system
Solutions.
How to turn Kg to Lbs - accurate answers-Multiply by 2.2
How to turn Lbs to Kg - accurate answers-Divide by 2.2
Wheat types of detail drawings would you expect to see on a elevator
installation job - accurate answers-Standardized, electrical, structural and
hoistway drawings
Installing hoistway limit switches what drawing will the mechanic reference -
accurate answers-Standardized detail drawing
Where should you place a lifeline when installing them - accurate answers-
close enough to permit tying off prior to entering
millimeters to inches - accurate answers-divide by 25.4
Inches to millimeters - accurate answers-multiply by 25.4
Drawings that are approved by the building owner or representative are
labeled with what term - accurate answers-Final
In a standard orthographic projection drawing, where is the placement of a
back view if needed - accurate answers-Off to one side of the working drawing
What is the most common drawing method for showing three sides of an
object at once in the elevator industry - accurate answers-Isometric Drawing
How would you describe a class 3 fit for shaft and bore diameters - accurate
answers-Snuggest possible allowance
Which class of bolts provides the highest level of precision - accurate answers-
Class 3 bolts
What is the difference between U.S standard and metric standard threads? -
accurate answers-U.S. standard measures threads per inch; metric standard
measures by pitch of the threads
, Which tool would be needed to remove an internal snap ring - accurate
answers-Internal snap ring pliers
The DBG on the elevator counterweight rails is 33 1/2 what is the metric
equivalent of this dimension - accurate answers-850.9mm
What type of drawing presents a 3 sided view of an object - accurate answers-
Orthographic drawing
When erecting a scaffold, what type of fall protection can be used in addition
to a personal fall arrest system - accurate answers-Guardrail system built with
tubular steel
What scaffold hazards are among the most serious - accurate answers-Falls,
unsafe access, scaffold collapse
What mnemonic can be used to help remember the five most serious scaffold
hazards - accurate answers-FUSES
You are the only subcontractor on site. While erecting a scaffold, who serves
as the safety officer? - accurate answers-The scaffolder
The employer is looking for someone who is experienced and has the
authority and knowledge to identify safety hazards who is this? - accurate
answers-A competent person
To keep a rolling scaffold from racking, what must be installed - accurate
answers-a horizontal or diagonal brace
Which terms describe two-point suspended scaffolds used by elevator
constructors - accurate answers-Power platforms and swing stages
What are the three major parts of the power platform suspended system -
accurate answers-Platform, hoist, and ropes
A suspended scaffold contains 3 basic systems which hold, hand and protect.
What are these systems - accurate answers-Support system, suspended
system and safety system
