JATC Year 1 Final Exam EXAM QUESTIONS WITH COMPLETE
Year 1 Final Exam JATC
SOLUTION GUIDE (A+ GRADED 100% VERIFIED) LATEST VERSION
Study online at https://quizlet.com/_dgdkwa
2025!!
1. Which of the following items should be read Introductory Information
first on every lesson?
2. A competent electrician is one who has ___ skill / knowledge / attitude
, __ , and a positive ___ for his or her trade.
3. The nucleus of what was to become the 1890 / St. Louis
IBEW was formed in ? in the city of ? .
4. The ? Act of 1935 is more commonly re- National Labor Relations
ferred to as the Wagner Act.
5. Worker ? on the job is a major reason that Absenteeism
job tasks cannot be performed in a timely
manner.
6. ? and ? are critically important to jobsite Awareness / common sense
safety.
a.
7. What are the three most important things I., IV., and V.
to remember with regards to work safety?
I. Work aware.
II. Work effectively.
III. Work productively.
IV. Work safe.
V. Work smart.
8. To find the area of a wire in circular mils, mils
square the diameter expressed in ?
9. 325 inch-pounds
, Year 1 Final Exam JATC
Study online at https://quizlet.com/_dgdkwa
What tightening torque should be used for
a hexagonal head screw (not split-bolt) on a
250 kcmil conductor?
10. To reduce a fraction, divide the numerator same number
and denominator by the ? .
11. When multiplying two fractions, multiply numerator
the numerator of one fraction by the ? of
the second fraction. This product is placed
over the product of the two denominators.
12. The term ? is used to identify the reference theta
point or angle.
13. The side next to the reference angle is Adjacent
called the ? side.
14. Since the ratios for sides of triangles are the trigonometric tables
same, when the angles are the same, ? have
been developed which show these ratios
for every angle encountered in a triangle.
15. The sine of θ is equal to the ? divided by the opposite / hypotenuse
?.
16. The cos θ is equal to the ? side divided by adjacent / hypotenuse
the ? .
17. The tan θ is equal to the ? side divided by opposite / adjacent
the ? side.
18. I. Additional labor to re-bend
II. Conduit may need to be bent multiple
Year 1 Final Exam JATC
SOLUTION GUIDE (A+ GRADED 100% VERIFIED) LATEST VERSION
Study online at https://quizlet.com/_dgdkwa
2025!!
1. Which of the following items should be read Introductory Information
first on every lesson?
2. A competent electrician is one who has ___ skill / knowledge / attitude
, __ , and a positive ___ for his or her trade.
3. The nucleus of what was to become the 1890 / St. Louis
IBEW was formed in ? in the city of ? .
4. The ? Act of 1935 is more commonly re- National Labor Relations
ferred to as the Wagner Act.
5. Worker ? on the job is a major reason that Absenteeism
job tasks cannot be performed in a timely
manner.
6. ? and ? are critically important to jobsite Awareness / common sense
safety.
a.
7. What are the three most important things I., IV., and V.
to remember with regards to work safety?
I. Work aware.
II. Work effectively.
III. Work productively.
IV. Work safe.
V. Work smart.
8. To find the area of a wire in circular mils, mils
square the diameter expressed in ?
9. 325 inch-pounds
, Year 1 Final Exam JATC
Study online at https://quizlet.com/_dgdkwa
What tightening torque should be used for
a hexagonal head screw (not split-bolt) on a
250 kcmil conductor?
10. To reduce a fraction, divide the numerator same number
and denominator by the ? .
11. When multiplying two fractions, multiply numerator
the numerator of one fraction by the ? of
the second fraction. This product is placed
over the product of the two denominators.
12. The term ? is used to identify the reference theta
point or angle.
13. The side next to the reference angle is Adjacent
called the ? side.
14. Since the ratios for sides of triangles are the trigonometric tables
same, when the angles are the same, ? have
been developed which show these ratios
for every angle encountered in a triangle.
15. The sine of θ is equal to the ? divided by the opposite / hypotenuse
?.
16. The cos θ is equal to the ? side divided by adjacent / hypotenuse
the ? .
17. The tan θ is equal to the ? side divided by opposite / adjacent
the ? side.
18. I. Additional labor to re-bend
II. Conduit may need to be bent multiple
