RBSM VOLUME 7 QUESTIONS WITH
COMPLETE SOLUTIONS GRADED A+
1 of 95
Term
Page 123: Define "waste assessment."
Give this one a try later!
The restoration of items damaged by smoke, heat, water, soot, mold, grease,
vandalism, fuel oil spills, tear gas and other reactants, chemical spills, and odors.
Gradual color loss due to sunlight or atmospheric pollutants. Fading is not
caused by cleaning application of any cleaning chemical. It is a natural process
, of color loss.
Evaluating the quality and kinds of waste generated be a company. The
purpose is to ascertain how much of the waste can be recycled, and to
prompt consideration of recycling when purchasing paper and other
materials.
a. Duct cleaning is the removal of dust, dirt, and other matter from heating
and cooling ventilation systems.
b. Duct sealing involves the "encapsulation" of particles and debris inside
the ventilation system.
Don't know?
2 of 95
Term
Page 62: Why should you not attempt to remove deep pitting?
Give this one a try later!
It may cause damage
and removal of the It will not affect the performance of
anodized coating. the aluminum.
It can improve the appearance of It is necessary to maintain the
the surface. structural integrity of the metal.
Don't know?
,3 of 95
Term
Page 66: When cleaning brass or copper, what should be added to
the recommended alkaline cleaner?
Give this one a try later!
A mild disinfectant An adhering sludge
A superplasticizer A corrosion inhibitor
Don't know?
4 of 95
Term
Page 131: What is the purpose of maintaining a clean room?
Give this one a try later!
Also known as brushing, is performed after cleaning to align the fabric pile, so
that a uniform fabric appearance is produced. Brushing enhances a fabric's
appearance. It is performed while the fabric is still damp after cleaning.
Each should be clearly numbered so that it is installed at the proper window
after cleaning. Identification should be place inconspicuously using a method
that will not be defaced or become illegible in the cleaning process.
, a. Exclusion - denying entrance to pests
b. Elimination of harborages - shelter and pest breeding areas
To control the number of particles in the air. Typically, a clean room is a
sealed, "particle free" work area in which levels of dust and even
microscopic particle must be kept to a minimum.
Don't know?
5 of 95
Term
Page 7: What is the advantage in using a wet cloth for wiping
ashtrays?
Give this one a try later!
Wet cloths are less effective
than dry cloths. It makes the ashtrays look shinier.
Using a wet cloth will create a mess This will avoid having
around the ashtrays. to periodically wash
them.
Don't know?
6 of 95
COMPLETE SOLUTIONS GRADED A+
1 of 95
Term
Page 123: Define "waste assessment."
Give this one a try later!
The restoration of items damaged by smoke, heat, water, soot, mold, grease,
vandalism, fuel oil spills, tear gas and other reactants, chemical spills, and odors.
Gradual color loss due to sunlight or atmospheric pollutants. Fading is not
caused by cleaning application of any cleaning chemical. It is a natural process
, of color loss.
Evaluating the quality and kinds of waste generated be a company. The
purpose is to ascertain how much of the waste can be recycled, and to
prompt consideration of recycling when purchasing paper and other
materials.
a. Duct cleaning is the removal of dust, dirt, and other matter from heating
and cooling ventilation systems.
b. Duct sealing involves the "encapsulation" of particles and debris inside
the ventilation system.
Don't know?
2 of 95
Term
Page 62: Why should you not attempt to remove deep pitting?
Give this one a try later!
It may cause damage
and removal of the It will not affect the performance of
anodized coating. the aluminum.
It can improve the appearance of It is necessary to maintain the
the surface. structural integrity of the metal.
Don't know?
,3 of 95
Term
Page 66: When cleaning brass or copper, what should be added to
the recommended alkaline cleaner?
Give this one a try later!
A mild disinfectant An adhering sludge
A superplasticizer A corrosion inhibitor
Don't know?
4 of 95
Term
Page 131: What is the purpose of maintaining a clean room?
Give this one a try later!
Also known as brushing, is performed after cleaning to align the fabric pile, so
that a uniform fabric appearance is produced. Brushing enhances a fabric's
appearance. It is performed while the fabric is still damp after cleaning.
Each should be clearly numbered so that it is installed at the proper window
after cleaning. Identification should be place inconspicuously using a method
that will not be defaced or become illegible in the cleaning process.
, a. Exclusion - denying entrance to pests
b. Elimination of harborages - shelter and pest breeding areas
To control the number of particles in the air. Typically, a clean room is a
sealed, "particle free" work area in which levels of dust and even
microscopic particle must be kept to a minimum.
Don't know?
5 of 95
Term
Page 7: What is the advantage in using a wet cloth for wiping
ashtrays?
Give this one a try later!
Wet cloths are less effective
than dry cloths. It makes the ashtrays look shinier.
Using a wet cloth will create a mess This will avoid having
around the ashtrays. to periodically wash
them.
Don't know?
6 of 95
