1
Total Force Fire Apparatus
Driver/Operator Pumper EOC Test
2025/2026 Exam Questions and Answers
| 100% Solved
allowing the fire apparatus to idle over an extended period of time can lead to all
the following except: - 🧠 ANSWER ✔✔engine fatigue
identify three conditions where you should drive your fire apparatus in low gear: -
🧠 ANSWER ✔✔-climbing a hill
-traveling under an overpass
-approaching an intersection
before driving over a guarded railroad crossing during an emergency response: - 🧠
ANSWER ✔✔look both right and left and proceed cautiously
you may need to perform a confined space turnaround: - 🧠 ANSWER ✔✔for a
reverse hose lay in a narrow street or intersection
1
COPYRIGHT©NINJANERD 2025/2026. YEAR PUBLISHED 2025. COMPANY REGISTRATION NUMBER: 619652435. TERMS OF USE. PRIVACY
STATEMENT. ALL RIGHTS RESERVED
, 2
the purchase acceptance test on a new fire apparatus should focus on: - 🧠
ANSWER ✔✔bid specifications
you should never back a fire apparatus : - 🧠 ANSWER ✔✔if you don't have at least
one spotter
when determining your own friction loss coefficients, the water flow discharged
from the nozzle is usually measured with a: - 🧠 ANSWER ✔✔pilot guage
your fire team is about to use a 1in solid stream nozzle. you tell them they can
expect a "nozzle reaction" which in laymans terms means: - 🧠 ANSWER ✔✔the
counter force to the force of water discharged from the nozzle
bouncing water off the inside walls of the nozzle bore to create a fog pattern is
called: - 🧠 ANSWER ✔✔periphery deflection
you figure pressure loss in a single line hose flowing at 350gpm to be 45 psi. Then
a coupling is added and the nozzle is taken to the 6th floor of a burning structure.
The friction loss for this new layout is now: - 🧠 ANSWER ✔✔80psi
using the hand method, the estimated friction loss for 300 feet of 2 1/2in hose at
200gpm is approximately: - 🧠 ANSWER ✔✔24psi
2
COPYRIGHT©NINJANERD 2025/2026. YEAR PUBLISHED 2025. COMPANY REGISTRATION NUMBER: 619652435. TERMS OF USE. PRIVACY
STATEMENT. ALL RIGHTS RESERVED
Total Force Fire Apparatus
Driver/Operator Pumper EOC Test
2025/2026 Exam Questions and Answers
| 100% Solved
allowing the fire apparatus to idle over an extended period of time can lead to all
the following except: - 🧠 ANSWER ✔✔engine fatigue
identify three conditions where you should drive your fire apparatus in low gear: -
🧠 ANSWER ✔✔-climbing a hill
-traveling under an overpass
-approaching an intersection
before driving over a guarded railroad crossing during an emergency response: - 🧠
ANSWER ✔✔look both right and left and proceed cautiously
you may need to perform a confined space turnaround: - 🧠 ANSWER ✔✔for a
reverse hose lay in a narrow street or intersection
1
COPYRIGHT©NINJANERD 2025/2026. YEAR PUBLISHED 2025. COMPANY REGISTRATION NUMBER: 619652435. TERMS OF USE. PRIVACY
STATEMENT. ALL RIGHTS RESERVED
, 2
the purchase acceptance test on a new fire apparatus should focus on: - 🧠
ANSWER ✔✔bid specifications
you should never back a fire apparatus : - 🧠 ANSWER ✔✔if you don't have at least
one spotter
when determining your own friction loss coefficients, the water flow discharged
from the nozzle is usually measured with a: - 🧠 ANSWER ✔✔pilot guage
your fire team is about to use a 1in solid stream nozzle. you tell them they can
expect a "nozzle reaction" which in laymans terms means: - 🧠 ANSWER ✔✔the
counter force to the force of water discharged from the nozzle
bouncing water off the inside walls of the nozzle bore to create a fog pattern is
called: - 🧠 ANSWER ✔✔periphery deflection
you figure pressure loss in a single line hose flowing at 350gpm to be 45 psi. Then
a coupling is added and the nozzle is taken to the 6th floor of a burning structure.
The friction loss for this new layout is now: - 🧠 ANSWER ✔✔80psi
using the hand method, the estimated friction loss for 300 feet of 2 1/2in hose at
200gpm is approximately: - 🧠 ANSWER ✔✔24psi
2
COPYRIGHT©NINJANERD 2025/2026. YEAR PUBLISHED 2025. COMPANY REGISTRATION NUMBER: 619652435. TERMS OF USE. PRIVACY
STATEMENT. ALL RIGHTS RESERVED
