Ammo Block 3 Exam Questions And Answers.
AFTO Form 244 - form used to document delayed discrepancies and corrective actions for
equipment. maintained on all equipment items to ensure serviceability
AFTO Form 244 part 1 - item identification
AFTO Form 244 part2 - non scheduled inspection
AFTO Form 244 part 3 - scheduled inspection
AFTO Form 244 part 4 - supervisory review
AFTO Form 244 part 5 - Maintenance/Delayed discrepancy
Which TO gives guidance on the symbols used to properly fill out an AFTO Form 244? - TO 00-20-1
red x - equipment is unsafe and unfit for use
red diagonal / - that an unsatisfactory condition exists on the equipment but it's not sufficiently
urgent or dangers to Warrant discontinuing use
Red dash - - require inspection
clearing the symbol - a qualified and certified individual initials over the symbol
AFTO FORM 95 - document for maintaining a permanent history of significant maintenance
20mm 4 main components - cartridge case, primer, propellant, and projectile
https://www.stuvia.com/
, 20mm primer - electric
rotating band - provides a gas seal and causes the projectile to spin
20mm armor-piercing incendiary - black with a light red band and White markings. armored targets
20mm high explosive incendiary - yellow with a light red band and black markings. aircraft and light
material targets
20mm Dummy - unpainted with a chrome finish. testing in cycling the gun systems
target practice - blue with White markings
Target practice tracer - blue with White markings and light red T
M548 - 20 mm container holds 200-250 rds
replenisher - used to transfer 20mm ammunition from Storage into the UALS or LALS loader
assemblies for transportation to the flight line
table assembly - provides a mobile support for mounting the other components and is mounted on
four wheels
delinker loader unit - capable of stripping M-14 and M-22 links from linked belts of 20mm
delinker loader unit - capable of stripping M-14 and M-22 links from linked belts of 20mm
Access Unit - provides the mechanical gating and switching functions so the 20mm can be
transferred to and from the interface unit of the UALS
conveyor element belt - used to support and transport ammunition from the deLinker loader unit or
the ammunition tray to the access unit.
https://www.stuvia.com/
AFTO Form 244 - form used to document delayed discrepancies and corrective actions for
equipment. maintained on all equipment items to ensure serviceability
AFTO Form 244 part 1 - item identification
AFTO Form 244 part2 - non scheduled inspection
AFTO Form 244 part 3 - scheduled inspection
AFTO Form 244 part 4 - supervisory review
AFTO Form 244 part 5 - Maintenance/Delayed discrepancy
Which TO gives guidance on the symbols used to properly fill out an AFTO Form 244? - TO 00-20-1
red x - equipment is unsafe and unfit for use
red diagonal / - that an unsatisfactory condition exists on the equipment but it's not sufficiently
urgent or dangers to Warrant discontinuing use
Red dash - - require inspection
clearing the symbol - a qualified and certified individual initials over the symbol
AFTO FORM 95 - document for maintaining a permanent history of significant maintenance
20mm 4 main components - cartridge case, primer, propellant, and projectile
https://www.stuvia.com/
, 20mm primer - electric
rotating band - provides a gas seal and causes the projectile to spin
20mm armor-piercing incendiary - black with a light red band and White markings. armored targets
20mm high explosive incendiary - yellow with a light red band and black markings. aircraft and light
material targets
20mm Dummy - unpainted with a chrome finish. testing in cycling the gun systems
target practice - blue with White markings
Target practice tracer - blue with White markings and light red T
M548 - 20 mm container holds 200-250 rds
replenisher - used to transfer 20mm ammunition from Storage into the UALS or LALS loader
assemblies for transportation to the flight line
table assembly - provides a mobile support for mounting the other components and is mounted on
four wheels
delinker loader unit - capable of stripping M-14 and M-22 links from linked belts of 20mm
delinker loader unit - capable of stripping M-14 and M-22 links from linked belts of 20mm
Access Unit - provides the mechanical gating and switching functions so the 20mm can be
transferred to and from the interface unit of the UALS
conveyor element belt - used to support and transport ammunition from the deLinker loader unit or
the ammunition tray to the access unit.
https://www.stuvia.com/
