NDI CDC URE Exam Questions and Answers Already Passed
TO provide all of the following pertaining to the inspection operation ,maintenance , and modification of
AF equipment and material except ? - Answers policy directives
Simply stated, a TO is considered to be ? - Answers military order
TOs are established, numbered, and issued in accordance with which TO ? - Answers 00-5-1
Which type of technical order (TO) covers Installation, operation, troubleshooting, repairing, removing,
calibration, and servicing or handling of Airforce military systems ? - Answers (O&M TOs) Operations and
maintenance TOs
ETIMS (Enhanced Technical Information Management System) provides a direct on-line connectivity
from every base into the management system to allow all except ? - Answers Most current publication
date
To find the most current publication date of TO, check - Answers The TO Index
The Maintenance Integrated Data Access system (MIDAS) is ? - Answers a six-digit numbering system
expressed as three elements of two digits each
What information does the NDI General Systems (GS) manual provide ? - Answers Inspections
What type of equipment manual would contain equipment calibration requirements ? - Answers
Operation and service manual
A group assembly part list has several part numbers listed for a part you need. To determine which part
number is right for your aircraft, refer to the - Answers Usable on code column
Where would you find information for recording and reporting a NDI technique to inspect an F-16C
aircraft speed brake ? - Answers 33B-1-1
You only know a parts name. To locate the applicable paragraph and figure number for the inspection,
check the TOs - Answers Alphabetical Index
While doing a job you find a mistake in the TO. Correcting this requires initiation of a technical manual
change recommendation and reply form. Who is responsible ? - Answers YOU
Which change recommendation priority must be answered within 40 calendar days ? - Answers Urgent
which type of change recommendation priority is used to recommend improvements to correct
potential hazards ? - Answers Routine
Which TO contains complete instructions for maintaining TOs - Answers 00-5-1
Electronic technical orders (eTO) are files identified by a media distribution code suffix of - Answers -
WA-n
,You need to order a new To for personnel use on a regular basis; how would you accomplish this
action ? - Answers Establish an ID requirement
The TO listing for your shops operational TO file will show you all of the following except - Answers who
currently has one signed out
Responsibility for consolidating TO requests on an installation rest with the - Answers Personnel in the
TODO
With few exceptions , you must file TOs within a maximum of - Answers five workdays of receipt
A TO effective date is - Answers later than the basic date
In which TO chapter would you find page 4-2 - Answers 4
File technical order (TO) supplements in - Answers reverse numerical order in front of the basic TO
Enhanced Technical Information Management System (ETIMS) will be updated automatically in no more
than how many days ? - Answers 7 Calendar Days
Who has ownership of Air Force supplies and equipment ? - Answers The American Taxpayer
The purpose of the Air Force supply system - Answers provide a standard means of purchasing,
distributing, and controlling equipment / supplies required by the Air Force
Which system is used to determine whether your NDI Lab is authorized a piece of equipment. - Answers
AFEMS
Which form is used to request an item not listed in the Federal Supply System - Answers DD Form 1348-
6
Which condition tag would be placed on an eddy current unit being sent back to depot for repair -
Answers Green DD Form 1577-2
All of these requirements for an initial journeyman skill level except you must - Answers complete 9
months of OJT
From the lowest to the highest, what are the three levels of maintenance capability - Answers
Organizational, intermediate, depot
Which level of maintenance involves major repairs and overhaul? - Answers Depot
Which inspection involves a thorough and searching review of an entire weapon system ? - Answers
Periodic (PE)
Which inspection attempts to minimize the length of time an aircraft is down for inspection ? - Answers
Phase (PH)
, Which inspection is based on calendar days ? - Answers Isochronal (ISO)
Which maintenance symbol would be used to indicate a scheduled periodic (PE) inspection is overdue ? -
Answers Red Dash
which signal signifies that an unsatisfactory condition exists - Answers Red Diagonal
Category 1 deficiency reports (DR) are not used to report conditions - Answers Resulting from
nonconformance to specifications
Maintenance data documentation (MDD) is grouped into what categories ? - Answers on- and off-
equipment
You would not find maintenance data documentation (MDD) rules in - Answers TO 00-35D-54
maintenance information system (MIS) refers to an automated maintenance information system that
supports and enables what ? - Answers Maintenance business processes
Which maintenance data documentation (MDD) code is used as the primary method of sorting
information ? - Answers Work unit
The Air Force maintains a limited number of these maintenance data documentation (MDD) codes to
simplify reporting ? - Answers How malfunctioned
Which is not a maintenance inspector function ? - Answers Verify the quantity of modified parts is
correct
All engine flight data can be found on Air Force Technical Order (AFTO) Form - Answers 781J
What is the correct format for entering a date in the 781 series forms - Answers YYYYMMDD
Which blocks are used by NDI personnel to clear all red dash discrepancies - Answers Inspected by and
employee no. blocks
What is used to record service, periodic, and special inspections, and the current status of equipment -
Answers AFTO 244
What indicates a special inspection or operational check is due, a scheduled inspection is overdue, and
the equipment is in an unknown condition ? - Answers A red dash
What is a database developed for NDI career field in an effort to reduce paper and improve the
management of process controls and equipment maintenance. - Answers PCAMS
What are commanders, staff officers, and supervisors responsible for when it comes to accident
prevention ? - Answers Enforcing standards and regulations
The minimum temperature required far a substance to initiate self-substance combustion is known as -
Answers ignition temperature
TO provide all of the following pertaining to the inspection operation ,maintenance , and modification of
AF equipment and material except ? - Answers policy directives
Simply stated, a TO is considered to be ? - Answers military order
TOs are established, numbered, and issued in accordance with which TO ? - Answers 00-5-1
Which type of technical order (TO) covers Installation, operation, troubleshooting, repairing, removing,
calibration, and servicing or handling of Airforce military systems ? - Answers (O&M TOs) Operations and
maintenance TOs
ETIMS (Enhanced Technical Information Management System) provides a direct on-line connectivity
from every base into the management system to allow all except ? - Answers Most current publication
date
To find the most current publication date of TO, check - Answers The TO Index
The Maintenance Integrated Data Access system (MIDAS) is ? - Answers a six-digit numbering system
expressed as three elements of two digits each
What information does the NDI General Systems (GS) manual provide ? - Answers Inspections
What type of equipment manual would contain equipment calibration requirements ? - Answers
Operation and service manual
A group assembly part list has several part numbers listed for a part you need. To determine which part
number is right for your aircraft, refer to the - Answers Usable on code column
Where would you find information for recording and reporting a NDI technique to inspect an F-16C
aircraft speed brake ? - Answers 33B-1-1
You only know a parts name. To locate the applicable paragraph and figure number for the inspection,
check the TOs - Answers Alphabetical Index
While doing a job you find a mistake in the TO. Correcting this requires initiation of a technical manual
change recommendation and reply form. Who is responsible ? - Answers YOU
Which change recommendation priority must be answered within 40 calendar days ? - Answers Urgent
which type of change recommendation priority is used to recommend improvements to correct
potential hazards ? - Answers Routine
Which TO contains complete instructions for maintaining TOs - Answers 00-5-1
Electronic technical orders (eTO) are files identified by a media distribution code suffix of - Answers -
WA-n
,You need to order a new To for personnel use on a regular basis; how would you accomplish this
action ? - Answers Establish an ID requirement
The TO listing for your shops operational TO file will show you all of the following except - Answers who
currently has one signed out
Responsibility for consolidating TO requests on an installation rest with the - Answers Personnel in the
TODO
With few exceptions , you must file TOs within a maximum of - Answers five workdays of receipt
A TO effective date is - Answers later than the basic date
In which TO chapter would you find page 4-2 - Answers 4
File technical order (TO) supplements in - Answers reverse numerical order in front of the basic TO
Enhanced Technical Information Management System (ETIMS) will be updated automatically in no more
than how many days ? - Answers 7 Calendar Days
Who has ownership of Air Force supplies and equipment ? - Answers The American Taxpayer
The purpose of the Air Force supply system - Answers provide a standard means of purchasing,
distributing, and controlling equipment / supplies required by the Air Force
Which system is used to determine whether your NDI Lab is authorized a piece of equipment. - Answers
AFEMS
Which form is used to request an item not listed in the Federal Supply System - Answers DD Form 1348-
6
Which condition tag would be placed on an eddy current unit being sent back to depot for repair -
Answers Green DD Form 1577-2
All of these requirements for an initial journeyman skill level except you must - Answers complete 9
months of OJT
From the lowest to the highest, what are the three levels of maintenance capability - Answers
Organizational, intermediate, depot
Which level of maintenance involves major repairs and overhaul? - Answers Depot
Which inspection involves a thorough and searching review of an entire weapon system ? - Answers
Periodic (PE)
Which inspection attempts to minimize the length of time an aircraft is down for inspection ? - Answers
Phase (PH)
, Which inspection is based on calendar days ? - Answers Isochronal (ISO)
Which maintenance symbol would be used to indicate a scheduled periodic (PE) inspection is overdue ? -
Answers Red Dash
which signal signifies that an unsatisfactory condition exists - Answers Red Diagonal
Category 1 deficiency reports (DR) are not used to report conditions - Answers Resulting from
nonconformance to specifications
Maintenance data documentation (MDD) is grouped into what categories ? - Answers on- and off-
equipment
You would not find maintenance data documentation (MDD) rules in - Answers TO 00-35D-54
maintenance information system (MIS) refers to an automated maintenance information system that
supports and enables what ? - Answers Maintenance business processes
Which maintenance data documentation (MDD) code is used as the primary method of sorting
information ? - Answers Work unit
The Air Force maintains a limited number of these maintenance data documentation (MDD) codes to
simplify reporting ? - Answers How malfunctioned
Which is not a maintenance inspector function ? - Answers Verify the quantity of modified parts is
correct
All engine flight data can be found on Air Force Technical Order (AFTO) Form - Answers 781J
What is the correct format for entering a date in the 781 series forms - Answers YYYYMMDD
Which blocks are used by NDI personnel to clear all red dash discrepancies - Answers Inspected by and
employee no. blocks
What is used to record service, periodic, and special inspections, and the current status of equipment -
Answers AFTO 244
What indicates a special inspection or operational check is due, a scheduled inspection is overdue, and
the equipment is in an unknown condition ? - Answers A red dash
What is a database developed for NDI career field in an effort to reduce paper and improve the
management of process controls and equipment maintenance. - Answers PCAMS
What are commanders, staff officers, and supervisors responsible for when it comes to accident
prevention ? - Answers Enforcing standards and regulations
The minimum temperature required far a substance to initiate self-substance combustion is known as -
Answers ignition temperature
