CSX Conductor Test Prep: Realistic Practice Questions & Answer Keys | 2025/26 UPDATES.
About This Resource:
This CSX Conductor Practice Question Pack is designed to help you prepare for the CSX Freight
Conductor Pre-Employment Assessment. It includes realistic practice questions covering key areas such
as mechanical reasoning, reading comprehension, safety protocols, and situational judgment.
Whether you're applying for your first railroad job or transitioning roles, this guide will help you walk in
confident and exam-ready.
1, 12 - ✔✔-The minimum number of flags and fusees required at the beginning of a trip or tour of duty in
an occupied caboose or shoving platform is __ red flag, and __ fusees.
1, 2, 2 - ✔✔-How many hand brakes must be applied for one car ____, two cars ____, three or more cars
____ plus as many as needed to secure the cars.
1, 6 - ✔✔-The minimum number of flags and fusees required at the beginning of a trip or tour of duty in
the controlling locomotive is __ red flag, and __ fusees.
10 - ✔✔-The following speeds must not be exceeded per rule 46(Tracks); _____ MPH on other than main
track, or signaled tracks, such as in yards.
10 - ✔✔-The following speeds must not be exceeded per rule 46(Turnouts and corssovers); _____ MPH
through hand operated turnouts and crossovers other than to and from the main track.
10 - ✔✔-The speed thru a switch other than to and from the main track is __ MPH.
10 - ✔✔-Trains operating on excepted track must not exceed ____ MPH.
12 - ✔✔-Maximum amount of locomotives allowed with cars?
14, 21 - ✔✔-Rule EHR 4453, advises to avoid operating cars subject to rocking between __ and __ MPH
in locations designated in special instructions.
,15 - ✔✔-How many locomotives may travel in a consist with no cars or only a caboose or shoving
platform?
15 - ✔✔-Slow Speed may not exceed __ MPH.
15 - ✔✔-The following speeds must not be exceeded per rule 46(Turnouts and corssovers); _____ MPH
through hand operated turnouts and crossovers to and from the main track.
15 - ✔✔-The speed thru a switch to and from the main track may not exceed __ MPH.
2 - ✔✔-A warning sign will be loacted at least ____ miles before the restriction .
2, 2 1/2 - ✔✔-Unless otherwise specified, warning signs will be displayed at least __, but no more than __
__ miles from the beginning of the working limits on each end.
20, leading end - ✔✔-Rule 193-A states that All movements must be made at controlled speed on main
track yard limits , not exceeding ___ MPH until the ___________ ______ reaches the far limits.
25 - ✔✔-The following speeds must not be exceeded per rule 46 (Tracks); _____ MPH on non-signaled
siding.
25 - ✔✔-When handling CSX engineering equipment on your train, do not exceed ___ MPH unless
otherwise instructed.
25, 50 - ✔✔-Unless you have 3 step protection, do not cross within ___ feet of a standing train, or ___
feet between cars.
3 Step protection - ✔✔-Before fouling equipment with a controlled locomotive, you must obtain __
_____ _________.
30 - ✔✔-Locomotives being shoved may not exceed ___ MPH.
, 30 - ✔✔-Medium Speed may not exceed __ MPH.
30 - ✔✔-Trains shoving cars may not exceed ___ MPH.
30 - ✔✔-Warning signs may be placed up to ____ minutes before the working limits become effective, as
long as the employee in charge is available to communicate with any train approaching the working
limits.
30 - ✔✔-When a defect detector announces that there is a problem with your train but no defects are
found, the train may not exceed __ MPH until it reaches the next defect detector.
30, 10 - ✔✔-The minimum distance you must stand from switches and derails associated with a passing
train is ___ feet, and during switching operations is ___ feet.
30, 2 - ✔✔-When a telemetry device fails en route, you must not exceed ___ MPH, or move on a grade of
__ % or more.
30, 70 - ✔✔-A single locomotive may not exceed __ MPH, and a consist of locomotives may never
exceed __ MPH.
4 - ✔✔-Couple speed must never exceed ___ MPH.
4 feet, 8 and 1/2 inches - ✔✔-Track guage is the inside distance between the rails and measures:
40, 10 - ✔✔-Trains handling welded or continuously jointed rail may not exceed __ MPH, and must not
exceed __ MPH when crossing thru-truss bridges, and going over turnouts, crossovers, and tunnels.
45 - ✔✔-Limited Speed may not exceed __ MPH.
5 - ✔✔-The following speeds must not be exceeded per rule 46(Tracks); within an engine service area or
car shop repair area.
About This Resource:
This CSX Conductor Practice Question Pack is designed to help you prepare for the CSX Freight
Conductor Pre-Employment Assessment. It includes realistic practice questions covering key areas such
as mechanical reasoning, reading comprehension, safety protocols, and situational judgment.
Whether you're applying for your first railroad job or transitioning roles, this guide will help you walk in
confident and exam-ready.
1, 12 - ✔✔-The minimum number of flags and fusees required at the beginning of a trip or tour of duty in
an occupied caboose or shoving platform is __ red flag, and __ fusees.
1, 2, 2 - ✔✔-How many hand brakes must be applied for one car ____, two cars ____, three or more cars
____ plus as many as needed to secure the cars.
1, 6 - ✔✔-The minimum number of flags and fusees required at the beginning of a trip or tour of duty in
the controlling locomotive is __ red flag, and __ fusees.
10 - ✔✔-The following speeds must not be exceeded per rule 46(Tracks); _____ MPH on other than main
track, or signaled tracks, such as in yards.
10 - ✔✔-The following speeds must not be exceeded per rule 46(Turnouts and corssovers); _____ MPH
through hand operated turnouts and crossovers other than to and from the main track.
10 - ✔✔-The speed thru a switch other than to and from the main track is __ MPH.
10 - ✔✔-Trains operating on excepted track must not exceed ____ MPH.
12 - ✔✔-Maximum amount of locomotives allowed with cars?
14, 21 - ✔✔-Rule EHR 4453, advises to avoid operating cars subject to rocking between __ and __ MPH
in locations designated in special instructions.
,15 - ✔✔-How many locomotives may travel in a consist with no cars or only a caboose or shoving
platform?
15 - ✔✔-Slow Speed may not exceed __ MPH.
15 - ✔✔-The following speeds must not be exceeded per rule 46(Turnouts and corssovers); _____ MPH
through hand operated turnouts and crossovers to and from the main track.
15 - ✔✔-The speed thru a switch to and from the main track may not exceed __ MPH.
2 - ✔✔-A warning sign will be loacted at least ____ miles before the restriction .
2, 2 1/2 - ✔✔-Unless otherwise specified, warning signs will be displayed at least __, but no more than __
__ miles from the beginning of the working limits on each end.
20, leading end - ✔✔-Rule 193-A states that All movements must be made at controlled speed on main
track yard limits , not exceeding ___ MPH until the ___________ ______ reaches the far limits.
25 - ✔✔-The following speeds must not be exceeded per rule 46 (Tracks); _____ MPH on non-signaled
siding.
25 - ✔✔-When handling CSX engineering equipment on your train, do not exceed ___ MPH unless
otherwise instructed.
25, 50 - ✔✔-Unless you have 3 step protection, do not cross within ___ feet of a standing train, or ___
feet between cars.
3 Step protection - ✔✔-Before fouling equipment with a controlled locomotive, you must obtain __
_____ _________.
30 - ✔✔-Locomotives being shoved may not exceed ___ MPH.
, 30 - ✔✔-Medium Speed may not exceed __ MPH.
30 - ✔✔-Trains shoving cars may not exceed ___ MPH.
30 - ✔✔-Warning signs may be placed up to ____ minutes before the working limits become effective, as
long as the employee in charge is available to communicate with any train approaching the working
limits.
30 - ✔✔-When a defect detector announces that there is a problem with your train but no defects are
found, the train may not exceed __ MPH until it reaches the next defect detector.
30, 10 - ✔✔-The minimum distance you must stand from switches and derails associated with a passing
train is ___ feet, and during switching operations is ___ feet.
30, 2 - ✔✔-When a telemetry device fails en route, you must not exceed ___ MPH, or move on a grade of
__ % or more.
30, 70 - ✔✔-A single locomotive may not exceed __ MPH, and a consist of locomotives may never
exceed __ MPH.
4 - ✔✔-Couple speed must never exceed ___ MPH.
4 feet, 8 and 1/2 inches - ✔✔-Track guage is the inside distance between the rails and measures:
40, 10 - ✔✔-Trains handling welded or continuously jointed rail may not exceed __ MPH, and must not
exceed __ MPH when crossing thru-truss bridges, and going over turnouts, crossovers, and tunnels.
45 - ✔✔-Limited Speed may not exceed __ MPH.
5 - ✔✔-The following speeds must not be exceeded per rule 46(Tracks); within an engine service area or
car shop repair area.
