Dante Level 2 Exam |COMPLETE AND DETAILED QUESTIONS AND ANSWERS|
REAL EXAM QNA | 2025 LATEST UPDATED 100% RATED CORRECT | 100%
VERFIED | ALREADY GRADED A+|GUARANTEED TO PASS!!
When should IGMP snooping (or other multicast management) be considered for a Dante
network? - (answer)When the estimated multicast bandwidth may approach a network port's
saturation point, impacting performance.
A broadcast network transmission: - (answer)transmits from one to everyone on the network.
A network that carries multiple, possibly unrelated data types (like internet, VoIP, Dante, etc.) is:
- (answer)called a converged network.
A multicast network transmission: - (answer)can trim the distribution list with IGMP snooping.
TCP: Good for general network
UDP: Good for LANs that are under your control - (answer)TCP
UDP
Dante multicast can be managed with IGMP Snooping v2 or v3. - (answer)True
Quality of Service (QoS) allows some traffic to be prioritized over others. When would be a good
time to consider engaging QoS? (Select all that apply) - (answer)1. When we have traffic a
converged network, so there is something to de-prioritize.
2. Only when using unmanaged switches.
, Suppose a switch has 8 queues on it. Which queue number would typically have the highest
priority? - (answer)1
If you don't know the PIN to unlock a Dante device with "Device Lock" engaged, can it be
recovered? - (answer)Yes. Connect to the computer directly to the Dante device (or make sure
the two are the only things connected to a switch) and wait two minutes. Dante Controller will
then allow you to unlock the device.
When commissioning or doing maintenance on a system with redundant networks, which is a
good practice? - (answer)Connect one network at a time, and verify that the devices are not set
to switched mode.
If a switch has 10x 1Gbps ports, how much switching capacity would a switch need to be
considered "non-blocking"? - (answer)10gbps
What can Dante Firmware Updater (part of Dante Controller) do for us? (Select all that apply.) -
(answer)1. It can do a quick scan of devices on your network, compare it to our online database
and tell you if firmware updates are available for any devices.
2. It can update the Dante firmware on a device, but check with the manufacturer's web site for
update instructions. Some devices may require other firmware to be updated before the Dante
firmware.
When configuring IGMP Snooping, how many switches should be IGMP Querier(s)? -
(answer)One - there can be only one.
If a multicast packet is sent on an unmanaged network, what will happen? - (answer)The
multicast packet will propagate to every port on the network - it will behave similarly to
broadcast.
REAL EXAM QNA | 2025 LATEST UPDATED 100% RATED CORRECT | 100%
VERFIED | ALREADY GRADED A+|GUARANTEED TO PASS!!
When should IGMP snooping (or other multicast management) be considered for a Dante
network? - (answer)When the estimated multicast bandwidth may approach a network port's
saturation point, impacting performance.
A broadcast network transmission: - (answer)transmits from one to everyone on the network.
A network that carries multiple, possibly unrelated data types (like internet, VoIP, Dante, etc.) is:
- (answer)called a converged network.
A multicast network transmission: - (answer)can trim the distribution list with IGMP snooping.
TCP: Good for general network
UDP: Good for LANs that are under your control - (answer)TCP
UDP
Dante multicast can be managed with IGMP Snooping v2 or v3. - (answer)True
Quality of Service (QoS) allows some traffic to be prioritized over others. When would be a good
time to consider engaging QoS? (Select all that apply) - (answer)1. When we have traffic a
converged network, so there is something to de-prioritize.
2. Only when using unmanaged switches.
, Suppose a switch has 8 queues on it. Which queue number would typically have the highest
priority? - (answer)1
If you don't know the PIN to unlock a Dante device with "Device Lock" engaged, can it be
recovered? - (answer)Yes. Connect to the computer directly to the Dante device (or make sure
the two are the only things connected to a switch) and wait two minutes. Dante Controller will
then allow you to unlock the device.
When commissioning or doing maintenance on a system with redundant networks, which is a
good practice? - (answer)Connect one network at a time, and verify that the devices are not set
to switched mode.
If a switch has 10x 1Gbps ports, how much switching capacity would a switch need to be
considered "non-blocking"? - (answer)10gbps
What can Dante Firmware Updater (part of Dante Controller) do for us? (Select all that apply.) -
(answer)1. It can do a quick scan of devices on your network, compare it to our online database
and tell you if firmware updates are available for any devices.
2. It can update the Dante firmware on a device, but check with the manufacturer's web site for
update instructions. Some devices may require other firmware to be updated before the Dante
firmware.
When configuring IGMP Snooping, how many switches should be IGMP Querier(s)? -
(answer)One - there can be only one.
If a multicast packet is sent on an unmanaged network, what will happen? - (answer)The
multicast packet will propagate to every port on the network - it will behave similarly to
broadcast.
