CDC 2A354N Integrated Fighter Avionic Systems Journeyman Volume 1 General Maintenance Information Exam 2025

Which is true concerning being a maintenance technician? - -You have a responsibility to comply with all written guidance to ensure all required repairs, inspections, and documentation are completed in a safe, timely and effective manner. Personnel who fail to maintain maintenance integrity will be held? - -Accountable What are the two major categories of maintenance? - -On-equipment and Off equipment What type of maintenance is performed as a flightline technician? - -On-equipment In the Air Force how many levels of maintenance do we have? - -3 Who is responsible for aerospace equipment maintenance required to ensure balance between sortie production and fleet management? - -Group commander Which maintenance squadron flight repairs, maintains, modifies, locally manufactures, and inspects aircraft and equipment components? - -Fabrication Quality Assurance (QA) works directly for? - -Maintenance Group Commander Who is responsible for flight maintenance production? - -Production Superintendent (Pro-super) Which best describes some of the jobs and responsibilities of the flight line expediter? - -Manages their portion of the flying schedule, coordinates scheduled and unscheduled maintenance, determines aircraft status, and coordinates with the pro-super and MOC. Within an Aircraft Maintenance Unit (AMU), the specialist section includes: - -Avionics, Propulsion (Engines), and Electro/Environmental (E&E) What are the three types of maintenance? - --Preventative -Scheduled -Unscheduled What type of maintenance is normal upkeep and preservation of equipment? - Preventative CDC CDC Which type of corrosion causes the metal surface to become rough and sometimes frosted? - -Uniformed etch When two dissimilar metals are coupled together in the presence of an electrolyte, the effect can? - -Produce galvanic corrosion Which technical order (TO) series will have the inspection requirements for any F-15 aircraft? - --6 What are the two primary aids to effective inspection scheduling? - -Inspection work cards and sequence charts Work cards are normally grouped by type of: - -Specialist required and by work area How many basic types of inspections does the Air Force have? - -5 How many basic types of inspections does our career field use? - -4 If a significant fuel leak developed while a pilot was taxiing an aircraft for take-off, it is likely: - -Maintenance personnel would identify this situation during the EOR inspection and make a determination at that time on how to proceed based on the technical guidance. What type of inspection is more thorough that a preflight? - -Basic postflight Who determines whether additional inspections are required on a 30-day inspection schedule? - -Senior maintenance officer How are isochronal inspections determined? - -Calendar day What are the objectives of the Aircraft Structural Integrity Program (ASIP)? - -Establish, evaluate, and substantiate the structural integrity of aircraft structures. Which is accountability? - -A person who, by law, lawful order, instructions, or contract maintains accurate records of property or documents in his or her charge. Who initiates the Report of Survey? - -The individual Who coordinates the effort to establish a forward supply point? - -Organization commander and Customer support officer of Base Supply. Identify stock items found in the work center. - -Bench, shop, and operating. Bench stock should carry enough of an item to last for? - -30 days CDC CDC What are examples of shop stock? - -Gas cylinders, random length bar stock, sheet metal, plastic and fabric. Where is a defective part sent in the repair cycle? - -Backshop Who authorizes a cannibalization? - -Pro-Super or maintenance officer What is the DD form 1574? - -Serviceable tag What color tag is used on a NEW part? - -Yellow Which situation is NOT a reason to submit a deficiency report (DR)? - -There is an unsatisfactory condition attribute to improper packaging and handling. Which is NOT a responsibility of the originator? - -Investigate noted conditions that may become DRs. The personnel in the originating point interact with the originator as required to ensure each deficiency report (DR) is: - -Valid, accurate, and complete. Which is NOT an example of information found in maintenance manuals? - -Instructions for modifying aircraft systems. The three main categories of time compliance technical orders (TCTO) are: - Immediate action, urgent action, and routine action. Which level of maintenance completes Category 2 time compliance technical orders (TCTO)? - -Depot If the urgency of conditions doesn't allow for time, what type of time compliance technical (TCTO) is used? - -Interim Methods and procedures technical orders (TO) begin with: - -00 Abbreviated TOs are primarily used for? - -As work simplification aids for personnel. How would you know a technical order (TO) number is in the utility aircraft TO category? - -The first group of numbers will contain the letter U. Group two of an aircraft technical order (TO) number identifies the: - -Aircraft series and model. The "2" in group 3 of technical order (TO) number 1U-2S-2-10 designates that the TO is a: - -Maintenance instruction. CDC CDC When the technical order (TO) number has only three parts, group three identifies the: - -Individual TO The fourth group of a technical order (TO) number contains one or two parts identifying a: - -TO's particular system and purpose. If a page is found missing from a TO, it: - -Is not valid and must be removed from service. How would you repair pages that have been ripped out of a TO binder? - -Use paper reinforcements. You can use cellophane tape to mend a torn TO page as long as: - -the tape does not obscure any technical data. When a TO change takes place, the changed (new) TO page: - -replaces the corresponding page number in the existing publication. Changes in the text of a TO are indicated by: - -A heavy black vertical line in the outer margin of the page. Supplements are issued to augment or change data in the basic TO: - -without replacing the existing page. Routine TO supplements are filed: - -In the back of the affected publication. Interim safety supplements are transmitted: - -Electronically. How can you tell if a supplement is filed in a TO? - -By a supplement number, entered in pencil, next to a circled TO paragraph number. An inventory of each TO page is also known as: - -List of effective pages check The two types of recommended TO changes are: - -Correction and improvement. What would the priority recommendation be if a TO deficiency WOULD result in a fatal or serious injury to personnel? - -Emergency What would the priority recommendation be if a TCTO were deficient? - -Urgent Responsibility for initiating follow-up action on a TO change recommendation with a delayed reply rests with: - -The local product improvement manager (PIM). Which action WILL NEVER be done after removing a LRU? - -Use of electrical tape to cover open connectors when high humidity is a problem. CDC CDC What should be used on open hydraulic lines? - -Metal caps only. How many indicating torque wrenches are there? - -2 What is the most common type of torque wrench used in the AF? - -Breakaway. What must be accomplished to keep the breakaway torque wrench set at a specific value? - -Lock the locking ring. How often should a torque wrench be calibrated? - -60 days or when dropped The Status Today symbol on the AFTO Form 781H represents: - -the highest open symbol in the forms. Prior to performing any maintenance on an aircraft you MUST first review the AFTO form: - -781A Symbols entered in the 781A symbol block may: - -NEVER be erased. When is a technician qualified to sigh off a red dash or diagonal? - -When the technician has completed training on the task which has been signed off in their training record. A warning note is required to be entered on an AFTO form 781A. To do this properly, the note will be entered into the: - -Discrepancy block. When the CORRECTED BY block on an AFTO form 781A is signed the signature will include the individual's: - -First initial, last name. The number and type of the next inspection due on an aircraft is documented on the AFTO form 781K. This data is entered in block: - -Aerospace inspection status. High humidity affects the buildup of a static charge on insulator material because the humid air: - -helps to dissipate electrostatic charges and decreases the chances of accumulating the charge. The primary cause of ESD damage to avionic components and equipment is: - Discharge of static electricity into the equipment connector pins. What must be performed prior to using the TTU-205 test set? - -A leak check on the tester. What is the purpose of the AN/APM-424 test set? - -Produces IFF interrogations and displays the received replies. How many push buttons are on the AN/APM-424 test set? - -3 CDC CDC On the AN/ALM-288 countermeasures dispensing set test set (CDSTS), which testing capability is used to test the serviceability of the (CMDS) dispenser ground spring contacts? - -Fire Test On the Joint Service Electronic Combat Systems Test Set (JSECST), which is checked during Group A test? - -Distance-to-fault. What operating system is used with the simplified key loader (SKL)? - -Windows CE What is the intention of the SERENE BYTE exercise? - -Identify problem areas. What is an example of foreign object damage (FOD)? - -Piece of scrap metal punctures an aircraft tire The responsibility for FOD prevention on the flight line rests with? - -Everyone Hydraulic fluid is NOT: - -Corrosive Gas cylinder valves have fusible safety plugs that are designed to release the gas when: - -Cylinder pressures exceed a certain level. Aircraft hydraulic systems are very dangerous because they operate at a pressure of: - 3000 psi The MOST common contaminant found in an aircraft hydraulic systems is: - -Air When you are working around electrical circuits you should