Written by students who passed Immediately available after payment Read online or as PDF Wrong document? Swap it for free 4.6 TrustPilot
logo-home
Document preview thumbnail
Preview 3 out of 23 pages
Exam (elaborations)

ARE 5.0 Project Planning & Design (Architecture Examination) UPDATED ACTUAL Exam Questions and CORRECT Answers

Document preview thumbnail
Preview 3 out of 23 pages

ARE 5.0 Project Planning & Design (Architecture Examination) UPDATED ACTUAL Exam Questions and CORRECT Answers annalemma - CORRECT ANSWER - The figure 8 curve that represents the angular offset of the sun from its mean position at as viewed from the earth Balance Point Temperature - CORRECT ANSWER - The outdoor temperature at which a building makes the transition from a heating to a cooling need Daylight autonomy - CORRECT ANSWER - The percentage of an area that meets a minimum daylight illuminance level or specified fraction of the operating hours per year. also referred to as special daylight auto

Content preview

ARE 5.0 Project Planning & Design
(Architecture Examination) UPDATED
ACTUAL Exam Questions and CORRECT
Answers
annalemma - CORRECT ANSWER - The figure 8 curve that represents the angular offset
of the sun from its mean position at as viewed from the earth


Balance Point Temperature - CORRECT ANSWER - The outdoor temperature at which a
building makes the transition from a heating to a cooling need


Daylight autonomy - CORRECT ANSWER - The percentage of an area that meets a
minimum daylight illuminance level or specified fraction of the operating hours per year. also
referred to as special daylight autonomy


Daylight factor - CORRECT ANSWER - The ratio expressed as a percentage othe indoor
aluminates at a point on a horizontal surface to the unobstructed Exterior horizontal illuminance


Effective aperature - CORRECT ANSWER - The product of visible transmittance and the
window to wall ratio


Equation of time - CORRECT ANSWER - The factor used to account for the difference
between solar time and clock time. Solar time is based on the position of the sun. It's basic unit is
the solar day


Glazing factor - CORRECT ANSWER - A LEED based number calculated by taking into
account window area, floor area, a window geometry factor, light transmission, and a window
height factor.


Ground light - CORRECT ANSWER - Visible light from the sun and sky, reflected by
exterior surfaces below the plane of the horizon

,Light shelf - CORRECT ANSWER - A horizontal element position above eye level and
designed to reflect daylight on the ceiling for improved daylighting effectiveness


Net metering - CORRECT ANSWER - The requirement that a utility pay and charge equal
rates regardless of which way electricity flows as a part of the utility Grid.


Radiation spectrum - CORRECT ANSWER - The entire range of electromagnetic
radiation extending from 0 hz to 1023 hz. This includes visible light as well as infrared radiation,
radio waves, and gamma rays among others


Radiative cooling - CORRECT ANSWER - Passive or active design strategy that uses
thermal mass to collect and store heat during the day for release at night. Also known as
nocturnal cooling and night cooled mass


Shading coefficient - CORRECT ANSWER - The ratio of the solar heat gain thru a
glazing product to the solar heat gain through an untreated 1/8 in clear double strength glass
under the same set of conditions. This is the value for the glass only, does not include the frame


Solar constant - CORRECT ANSWER - The amount of solar energy that falls in our unit
time on her unit area that is 93,000,000 miles from the sun and orientated on a plane
perpendicular to the suns rays. The mean value of the solar constant is 433 btu/hr-ft


Solar heat gain coefficient - CORRECT ANSWER - The ratio of the solar heat gain thru a
fenestration to the total solar radiation incident on the glazing.


Solar time - CORRECT ANSWER - The time as defined by the sun and it's position
relative to the earth. Because the length of the solar day varies most reference the mean solar day
as a basis for timekeeping.


Solar savings fraction - CORRECT ANSWER - The fraction of the total energy used by
system that is provided by solar technology. Represented by the variable F, it is a decimal
fraction from 0 to 1

, Visible light transmittance - CORRECT ANSWER - The fraction of visible light that
passes through a glazing material


Window to wall ratio - CORRECT ANSWER - The ratio of the net glazing area in your
room or space to the gross exterior wall area


Work plane - CORRECT ANSWER - This assumed height at which work is performed
usually considered to be at a desk height, 30 inches above the floor


Co product - CORRECT ANSWER - A marketable byproduct from a process. Materials
traditionally considered to be waist but they can be repurposed as raw materials and a different
manufacturing process.


Demand control ventilation - CORRECT ANSWER - A system designed to adjust the
amount of ventilation air provided to a space based on the extent of occupancy. The system
normally uses some type of sensors


Detention - CORRECT ANSWER - The temporary storage of storm run off and the
detention facility to control Pete's discharge rates and provides gravity settling of pollutants.
Provides a gradual release of stored water at a controlled rate


Drainage easement - CORRECT ANSWER - The legal rights granted by a land owner to a
grantee, commonly a governmental entity, allowing the use of private land for Stormwater
management


Embodied energy - CORRECT ANSWER - The total energy required to extract produce
fabricate and deliver material to a job site including the collection of raw materials, the energy
used to achieve extract and process the wrong materials, transportation from the original site to
the processing plant, that energy required to turn the wrong materials into a finish product, and
energy required to transport the material to the job site

Document information

Uploaded on
June 24, 2025
Number of pages
23
Written in
2024/2025
Type
Exam (elaborations)
Contains
Questions & answers
$13.49

Wrong document? Swap it for free Within 14 days of purchase and before downloading, you can choose a different document. You can simply spend the amount again.
Written by students who passed
Immediately available after payment
Read online or as PDF

Seller avatar
Reputation scores are based on the amount of documents a seller has sold for a fee and the reviews they have received for those documents. There are three levels: Bronze, Silver and Gold. The better the reputation, the more your can rely on the quality of the sellers work.
MGRADES
4.0
(235)
Sold
1538
Followers
108
Items
110360
Last sold
1 day ago




Why students choose Stuvia

Created by fellow students, verified by reviews

Quality you can trust: written by students who passed their tests and reviewed by others who've used these notes.

Didn't get what you expected? Choose another document

No worries! You can instantly pick a different document that better fits what you're looking for.

Pay as you like, start learning right away

No subscription, no commitments. Pay the way you're used to via credit card and download your PDF document instantly.

Student with book image

“Bought, downloaded, and aced it. It really can be that simple.”

Alisha Student

Working on your references?

Create accurate citations in APA, MLA and Harvard with our free citation generator.

Working on your references?

Frequently asked questions