Quality Engineering UPDATED Exam
Questions and CORRECT Answers
QUALITY - CORRECT ANSWER - properties inherent to an object that confer the
capacity to cover the implicit or explicit needs
UNIT OF MEASUREMENT - CORRECT ANSWER - it is a standardized quantity of a
certain physical quantity, defined and adopted by convention or by
MEASUREMENT ERROR - CORRECT ANSWER - is defined as the difference between
the measured value and the "true value"
METALIC RULER - CORRECT ANSWER -
LAINAS - CORRECT ANSWER - These meters consist of thin sheets that have their
thickness marked and that are used to measure small openings or slots
RADIO PATTERNS - CORRECT ANSWER - These patterns consist of a series of sheets
marked in mm with the corresponding concave and convex rays, formed in various parts of the
sheet.
COMPASS - CORRECT ANSWER -
COMPASS - CORRECT ANSWER - instrument that can be used to make circles or arcs
of circumference
GRAMIL - CORRECT ANSWER - tool used in carpentry or metalworking, to mark
parallel lines of cut in reference to a bank or surface, in addition to other operations. is drawn on
the edges of the wood
, thread account - CORRECT ANSWER - series of sheets that are held together by a screw
at one end, while the other has protrusions are indicated on each sheet
COMPARISON LOUPAS - CORRECT ANSWER - Useful for general inspection
purposes. an illumination and intercalation device can be adapted to the reticular optical system
useful for various measurements
VERNIER - CORRECT ANSWER -
VERNIER - CORRECT ANSWER - measuring instrument, mainly of external diameters,
interior and depths, used in the industrial field. It is an auxiliary scale that slides along a main
scale to allow exact fractional readings of the minimum division.
CALIBRATION - CORRECT ANSWER -
CALIBRATION - CORRECT ANSWER - is the process of comparing the values obtained
by a measuring instrument with the corresponding measurement of a reference (or standard)
standard.
MECHANISM - CORRECT ANSWER - Mechanisms are called devices or sets of
resistant solids that receive an input energy and, through a system of transmission and
transformation of movements, perform a job.
HEIGHT MEASURER - CORRECT ANSWER -
HEIGHT MEASURER - CORRECT ANSWER - It is a device for measuring the height of
pieces or height differences between planes at different levels.
MICROMETER - CORRECT ANSWER -
Questions and CORRECT Answers
QUALITY - CORRECT ANSWER - properties inherent to an object that confer the
capacity to cover the implicit or explicit needs
UNIT OF MEASUREMENT - CORRECT ANSWER - it is a standardized quantity of a
certain physical quantity, defined and adopted by convention or by
MEASUREMENT ERROR - CORRECT ANSWER - is defined as the difference between
the measured value and the "true value"
METALIC RULER - CORRECT ANSWER -
LAINAS - CORRECT ANSWER - These meters consist of thin sheets that have their
thickness marked and that are used to measure small openings or slots
RADIO PATTERNS - CORRECT ANSWER - These patterns consist of a series of sheets
marked in mm with the corresponding concave and convex rays, formed in various parts of the
sheet.
COMPASS - CORRECT ANSWER -
COMPASS - CORRECT ANSWER - instrument that can be used to make circles or arcs
of circumference
GRAMIL - CORRECT ANSWER - tool used in carpentry or metalworking, to mark
parallel lines of cut in reference to a bank or surface, in addition to other operations. is drawn on
the edges of the wood
, thread account - CORRECT ANSWER - series of sheets that are held together by a screw
at one end, while the other has protrusions are indicated on each sheet
COMPARISON LOUPAS - CORRECT ANSWER - Useful for general inspection
purposes. an illumination and intercalation device can be adapted to the reticular optical system
useful for various measurements
VERNIER - CORRECT ANSWER -
VERNIER - CORRECT ANSWER - measuring instrument, mainly of external diameters,
interior and depths, used in the industrial field. It is an auxiliary scale that slides along a main
scale to allow exact fractional readings of the minimum division.
CALIBRATION - CORRECT ANSWER -
CALIBRATION - CORRECT ANSWER - is the process of comparing the values obtained
by a measuring instrument with the corresponding measurement of a reference (or standard)
standard.
MECHANISM - CORRECT ANSWER - Mechanisms are called devices or sets of
resistant solids that receive an input energy and, through a system of transmission and
transformation of movements, perform a job.
HEIGHT MEASURER - CORRECT ANSWER -
HEIGHT MEASURER - CORRECT ANSWER - It is a device for measuring the height of
pieces or height differences between planes at different levels.
MICROMETER - CORRECT ANSWER -
