Defense Basic Preservation and
Packaging (CERT) 2025/2026 Exam
Questions and Answers | A+ Score
Assured
You need to secure a light-duty fiberboard box. Which manufacturer's joint
would you use? - 🧠 ANSWER ✔✔Taped
When packing a fiberboard box for shipment, you refer to ASTM D1974
because it contains standards for - 🧠 ANSWER ✔✔closing, sealing, and
reinforcement methods.
What is an incomplete corner along the edge of a piece of lumber called? -
🧠 ANSWER ✔✔Warping
Clinching increases nail retention. For proper clinching, the nail must meet
which three (3) criteria?
Select all that apply. - 🧠 ANSWER ✔✔Be angled along the edge grain of
the wood
Be clinched across the wood grain
COPYRIGHT©NINJANERD 2025/2026. YEAR PUBLISHED 2025. COMPANY REGISTRATION NUMBER:
619652435. TERMS OF USE. PRIVACY STATEMENT. ALL RIGHTS RESERVED 1
, Be clinching cut nails
Have its point protruding completely through wood pieces
Have the nail head protruding slightly above the wood
Be bent over, and driven back into the wood surface
What are hard, cross-grained masses or blemishes in wood called? - 🧠
ANSWER ✔✔Cross grain
You need to ship a 280 lb. load of ammunition to a location with hazardous
conditions and military contingencies. Which class of wirebound wood box
should you use? - 🧠 ANSWER ✔✔class 3
You may deviate from ASTM wooden box construction standards only
when - 🧠 ANSWER ✔✔the deviation results in a stronger box.
The item you're shipping will be stored outside in a wet climate for
extended periods of time. Which type of box treatment is needed to resist
water damage? - 🧠 ANSWER ✔✔Treatment B
You need to build a crate for an item that weighs 2200 lbs. Which crate-
building standard do you use? - 🧠 ANSWER ✔✔astm d7478
COPYRIGHT©NINJANERD 2025/2026. YEAR PUBLISHED 2025. COMPANY REGISTRATION NUMBER:
619652435. TERMS OF USE. PRIVACY STATEMENT. ALL RIGHTS RESERVED 2
Packaging (CERT) 2025/2026 Exam
Questions and Answers | A+ Score
Assured
You need to secure a light-duty fiberboard box. Which manufacturer's joint
would you use? - 🧠 ANSWER ✔✔Taped
When packing a fiberboard box for shipment, you refer to ASTM D1974
because it contains standards for - 🧠 ANSWER ✔✔closing, sealing, and
reinforcement methods.
What is an incomplete corner along the edge of a piece of lumber called? -
🧠 ANSWER ✔✔Warping
Clinching increases nail retention. For proper clinching, the nail must meet
which three (3) criteria?
Select all that apply. - 🧠 ANSWER ✔✔Be angled along the edge grain of
the wood
Be clinched across the wood grain
COPYRIGHT©NINJANERD 2025/2026. YEAR PUBLISHED 2025. COMPANY REGISTRATION NUMBER:
619652435. TERMS OF USE. PRIVACY STATEMENT. ALL RIGHTS RESERVED 1
, Be clinching cut nails
Have its point protruding completely through wood pieces
Have the nail head protruding slightly above the wood
Be bent over, and driven back into the wood surface
What are hard, cross-grained masses or blemishes in wood called? - 🧠
ANSWER ✔✔Cross grain
You need to ship a 280 lb. load of ammunition to a location with hazardous
conditions and military contingencies. Which class of wirebound wood box
should you use? - 🧠 ANSWER ✔✔class 3
You may deviate from ASTM wooden box construction standards only
when - 🧠 ANSWER ✔✔the deviation results in a stronger box.
The item you're shipping will be stored outside in a wet climate for
extended periods of time. Which type of box treatment is needed to resist
water damage? - 🧠 ANSWER ✔✔Treatment B
You need to build a crate for an item that weighs 2200 lbs. Which crate-
building standard do you use? - 🧠 ANSWER ✔✔astm d7478
COPYRIGHT©NINJANERD 2025/2026. YEAR PUBLISHED 2025. COMPANY REGISTRATION NUMBER:
619652435. TERMS OF USE. PRIVACY STATEMENT. ALL RIGHTS RESERVED 2
