Breath test operator UPDATED ACTUAL
Exam Questions and CORRECT Answers
A BTO collects evidence by obtaining valid breath samples.
A BTO uses an instrument to analyze breath samples and determine breath alcohol level. -
CORRECT ANSWER - What is the role of a BTO?
Intoxilyzer 8000 - CORRECT ANSWER - What is the approved instrument a BTO uses?
Infrared light absorption - CORRECT ANSWER - What is the approved method for breath
alcohol analysis in Florida
Microprocessor - CORRECT ANSWER - Calculates the amount of alcohol in a sample
based on the electrical response received from the detector
For the purpose of shipping to an authorized repair facility - CORRECT ANSWER -
When should the only time be for changing the dry gas standard cylinder
Wavelength - CORRECT ANSWER - The distance between one location of a wave of
light such as a crest or peak and the next corresponding location
Regurgitation - CORRECT ANSWER - Can bring the alcohol that may be present in the
stomach up into the mouth and can possibly affect the administration of the breath test
Calibration inlet - CORRECT ANSWER - The female connection fitting on the right side
of the instrument where the external dry gas standard cylinder
Automated training management system - CORRECT ANSWER - ATMS
Acetone - CORRECT ANSWER - What is an example of an interferent
, Radio frequency interference - CORRECT ANSWER - RFI
For the subject to provide a breath sample - CORRECT ANSWER - What is the purpose
of the mouth piece
Infrared light - CORRECT ANSWER - Electromagnetic radiation of energy in the form of
waves
20 minutes - CORRECT ANSWER - How many minutes for the instrument to warm up
To initiate a breath test sequence and to bring the instrument from standby mode to ready mode -
CORRECT ANSWER - What is the purpose of the start test button
AC power in the socket - CORRECT ANSWER - Socket on the rear of the instrument
where the power cord is plugged in
External printer port - CORRECT ANSWER - In the dock of the instrument where The
external printer is attached
Paper feed button - CORRECT ANSWER - Black push pad on the front of the instrument
used to advance the paper in the internal printer
Alveoli - CORRECT ANSWER - Thin walled sacs that fill the lungs and allow for gas and
volatile substances to pass from the blood into the lungs and from the lungs into the blood
Determines the amount of light not absorbed by the alcohol in the sample and converts this
response into an electrical response - CORRECT ANSWER - What is the purpose of the
detector
Exam Questions and CORRECT Answers
A BTO collects evidence by obtaining valid breath samples.
A BTO uses an instrument to analyze breath samples and determine breath alcohol level. -
CORRECT ANSWER - What is the role of a BTO?
Intoxilyzer 8000 - CORRECT ANSWER - What is the approved instrument a BTO uses?
Infrared light absorption - CORRECT ANSWER - What is the approved method for breath
alcohol analysis in Florida
Microprocessor - CORRECT ANSWER - Calculates the amount of alcohol in a sample
based on the electrical response received from the detector
For the purpose of shipping to an authorized repair facility - CORRECT ANSWER -
When should the only time be for changing the dry gas standard cylinder
Wavelength - CORRECT ANSWER - The distance between one location of a wave of
light such as a crest or peak and the next corresponding location
Regurgitation - CORRECT ANSWER - Can bring the alcohol that may be present in the
stomach up into the mouth and can possibly affect the administration of the breath test
Calibration inlet - CORRECT ANSWER - The female connection fitting on the right side
of the instrument where the external dry gas standard cylinder
Automated training management system - CORRECT ANSWER - ATMS
Acetone - CORRECT ANSWER - What is an example of an interferent
, Radio frequency interference - CORRECT ANSWER - RFI
For the subject to provide a breath sample - CORRECT ANSWER - What is the purpose
of the mouth piece
Infrared light - CORRECT ANSWER - Electromagnetic radiation of energy in the form of
waves
20 minutes - CORRECT ANSWER - How many minutes for the instrument to warm up
To initiate a breath test sequence and to bring the instrument from standby mode to ready mode -
CORRECT ANSWER - What is the purpose of the start test button
AC power in the socket - CORRECT ANSWER - Socket on the rear of the instrument
where the power cord is plugged in
External printer port - CORRECT ANSWER - In the dock of the instrument where The
external printer is attached
Paper feed button - CORRECT ANSWER - Black push pad on the front of the instrument
used to advance the paper in the internal printer
Alveoli - CORRECT ANSWER - Thin walled sacs that fill the lungs and allow for gas and
volatile substances to pass from the blood into the lungs and from the lungs into the blood
Determines the amount of light not absorbed by the alcohol in the sample and converts this
response into an electrical response - CORRECT ANSWER - What is the purpose of the
detector
