CIP Level 1 Exam with Questions and Answers

CIP Level 1 Exam with Questions and Answers You are the NACE inspector on a tank lining project where a 50% solids epoxy tank lining is being applied. After application of the 19 coat, you notice small blisters in some areas of the applied lining. Your FIRST preferred course of action is to: A. Break the blisters to see what's inside B. Document the problem and advise the contractor and owner's representative C. Document the problem and advise the contractor D. Extract any liquid that may be inside the blister and sent it to the lab for further analysis. ANSWERDocument the problem and advise the contractor and owner's representative The dew point is the temperature at which A. Water freezes B. humidity decreases C. Condensation occurs D. the air is saturated ANSWERcondensation occurs If a contractor is using a poorly maintained compressor to supply air for abrasive blast cleaning and conventional airspray, the coating inspector should perform a A. dry film thickness (DEI) measurement B. wet film thickness (WFT) measurement C. blotter test for the presence of oil and water D. vial test ANSWERblotter test for the presence of oil and water Upon arrival of coating materials, the inspector should