Written by students who passed Immediately available after payment Read online or as PDF Wrong document? Swap it for free 4.6 TrustPilot
logo-home
Document preview thumbnail
Preview 4 out of 64 pages
Exam (elaborations)

PA APPRAISERS LICENSE EXAM 2025 QUESTIONS AND ANSWERS

Document preview thumbnail
Preview 4 out of 64 pages

How is a diamond condition fixed? - ANS By pulling the damage for length. Diamond is a length condition. When measuring a unibody vehicle, it is discovered that the left front rail is 111mm from spec in width. What condition is this? - ANS Width is calculated from the center out, so a value of -111mm on the left rail shows sway to the right and in toward centerline. A collision damaged vehicle is discovered to be down in height at opposite end of the center section. - ANS Twist condition. When diagnosing the damage to a full frame assembly on a sport utility vehicle, it is determined that the left side frame rail is higher than the right side frame rail. Technician A says the damaged state is known as a twist condition. Technician B says a sway condition exists. Who is PA APPRAISERS LICENSE EXAM 2025 QUESTIONS AND ANSWERS COPYRIGHT © 2025 FYNDLAY ALL RIGHTS RESERVED 2 right? - ANS Tech A. When a frame rail's relationship to the vehicle centerline is changed, such as pushed either to the left or right, the condition is known as sway. "Twist" is referred as the condition of the frame when entire sections are driven higher or lower than the opposite side. Metal fillers contain different ingredients that provide fillers with special properties. - ANS Fiberglass offers more resistance to moisture HSLA - ANS High Strength Low Alloy When replacing the floor pan in the trunk area, what joint should be used to join the new pan to the existing floor? - ANS An overlap joint When acoustical foam is removed during the repair: - ANS It must be replaced with acoustical foam. When setting up a three-dimensional measuring system, it should be setup on an undamaged area. - ANS Starting in the center section is the correct method. COPYRIGHT © 2025 FYNDLAY ALL RIGHTS RESERVED 3 What is the plastic Black box in rear of the car? - ANS Vapor Canister Grinding or squeaking from wheel is a sign of what? - ANS Bad Bearings The insurance commissioner is responsible for everything except? - ANS Endorsing an insurance company How do you tell when a ball joint is bad? - ANS Measure fixed points from knuckle to rotor What makes the windows go up and down? - ANS Window regulator What panel needs to get removed is there is damage to the quarter panel? - ANS The taillight Actuator - ANS Tells something to do something Sensor - ANS Take reading and tell when something is wrong

Content preview

PA APPRAISERS LICENSE EXAM 2025
QUESTIONS AND ANSWERS




How is a diamond condition fixed? - ANS By pulling the damage for length. Diamond is a

length condition.




When measuring a unibody vehicle, it is discovered that the left front rail is 111mm from spec

in width. What condition is this? - ANS Width is calculated from the center out, so a value of

-111mm on the left rail shows sway to the right and in toward centerline.




A collision damaged vehicle is discovered to be down in height at opposite end of the center

section. - ANS Twist condition.




When diagnosing the damage to a full frame assembly on a sport utility vehicle, it is determined

that the left side frame rail is higher than the right side frame rail. Technician A says the

damaged state is known as a twist condition. Technician B says a sway condition exists. Who is


COPYRIGHT © 2025 FYNDLAY ALL RIGHTS RESERVED 1

,right? - ANS Tech A. When a frame rail's relationship to the vehicle centerline is changed,

such as pushed either to the left or right, the condition is known as sway. "Twist" is referred as

the condition of the frame when entire sections are driven higher or lower than the opposite

side.




Metal fillers contain different ingredients that provide fillers with special properties. -

ANS Fiberglass offers more resistance to moisture




HSLA - ANS High Strength Low Alloy




When replacing the floor pan in the trunk area, what joint should be used to join the new pan

to the existing floor? - ANS An overlap joint




When acoustical foam is removed during the repair: - ANS It must be replaced with

acoustical foam.




When setting up a three-dimensional measuring system, it should be setup on an undamaged

area. - ANS Starting in the center section is the correct method.



COPYRIGHT © 2025 FYNDLAY ALL RIGHTS RESERVED 2

,What is the plastic Black box in rear of the car? - ANS Vapor Canister




Grinding or squeaking from wheel is a sign of what? - ANS Bad Bearings




The insurance commissioner is responsible for everything except? - ANS Endorsing an

insurance company




How do you tell when a ball joint is bad? - ANS Measure fixed points from knuckle to rotor




What makes the windows go up and down? - ANS Window regulator




What panel needs to get removed is there is damage to the quarter panel? - ANS The taillight




Actuator - ANS Tells something to do something




Sensor - ANS Take reading and tell when something is wrong




COPYRIGHT © 2025 FYNDLAY ALL RIGHTS RESERVED 3

, What is Urethane Paint? - ANS Better than acrylic, extremely durable, and resists chipping;

easier to apply




What makes up the body of the vehicle? - ANS Anything that is welded together




Who has the first right to salvage? - ANS The insurer




What components make up a unibody? - ANS Last answer, longest answer on exam question




What needs to be on an appraisal? - ANS A license number




The photo of the Buick sedan with a rear fixed axle: - ANS Two wheel alignment




What are the two most common types of engines? - ANS V and inline




What are the two types of vehicle bodies? - ANS Conventional full frame and

Unibody/Unitized construction



COPYRIGHT © 2025 FYNDLAY ALL RIGHTS RESERVED 4

Document information

Uploaded on
June 10, 2025
Number of pages
64
Written in
2024/2025
Type
Exam (elaborations)
Contains
Questions & answers
$14.99

Wrong document? Swap it for free Within 14 days of purchase and before downloading, you can choose a different document. You can simply spend the amount again.
Written by students who passed
Immediately available after payment
Read online or as PDF

Seller avatar
Reputation scores are based on the amount of documents a seller has sold for a fee and the reviews they have received for those documents. There are three levels: Bronze, Silver and Gold. The better the reputation, the more your can rely on the quality of the sellers work.
Fyndlay
3.6
(76)
Sold
426
Followers
82
Items
20833
Last sold
6 days ago



Why students choose Stuvia

Created by fellow students, verified by reviews

Quality you can trust: written by students who passed their tests and reviewed by others who've used these notes.

Didn't get what you expected? Choose another document

No worries! You can instantly pick a different document that better fits what you're looking for.

Pay as you like, start learning right away

No subscription, no commitments. Pay the way you're used to via credit card and download your PDF document instantly.

Student with book image

“Bought, downloaded, and aced it. It really can be that simple.”

Alisha Student

Working on your references?

Create accurate citations in APA, MLA and Harvard with our free citation generator.

Working on your references?

Frequently asked questions