AVIXA CTS Sample Exam Questions with Correct Solutions| Latest Update Graded A+
Which system is used to show colors from a video display? Additive color system
Subtractive color system Plus/minus color system Recover color system
Which phase of an AV project comes immediately AFTER the Program Phase? The Design
Phase Project Planning and Coordination Phase The Verification Phase The Documentation
Phase
The use of __ while troubleshooting provides a reference signal to measure results against.
BluRay Player Multimeter Wireshark Signal Generator
When selecting a DC power supply that has to run a long distance, what must be
considered? RF interference voltage drop cable capacitance inductance
A client requires a new boardroom. The sales person and engineer are sent to the premises
to survey the facility and discuss the opportunity with the client. This process is best described
as a ____ Cost Analysis Functional Analysis Needs Analysis Control Analysis
When planning a new system's security settings, the integration project lead can expect to
discuss requirements with the ___________? End user using the system for company meetings
IT manager responsible for the network it's connecting to Project architect coordinating the
design team Distributor's sales representative that provided technical sales assistance
A junior level technician observes a senior level technician occasionally taking a pen like
device out of her shirt pocket and laying it along other cables in the area of where they are
working. What might the senior technician be doing? Recording modulated signals for further
evaluation after work is completed Using a non-contact voltage detector to verify AC high
voltage is not present Making invisible cable markers so she knows what's already been worked
on Charging her USB backup battery using induction charging technology
When assisting an end user experiencing intermittent display system failures which of
following would be the best customer service follow up question?
, What was being used just prior to the last failure?
Is the modulated cable resolution flag set to "On"?
Can we discuss this later when we're not so busy?
If it doesn't happen frequently can you just ignore?
What is the BEST PRACTICE for deciding between unbalanced and balanced audio cables?
Use unbalanced for cables under 25' (7.6 m) Use unbalanced for cables under 30' (9.1 m) Use
balanced for all cables over 50' (15.2 m) Use balanced for all cables
Which is of the following is TRUE of a decibel? It is a measure of loudness? When
calculating a decibel you would utilize a 20 log function for power. When calculating a decibel
you would utilize a 10 log function for sound pressure. It is a ratio of two numbers meant to
represent the change from a previously measured value to a newly measure value.
What preventive maintenance procedure is illustrated below? Replacement or cleaning of a
projector air filter Removal of laptop computers hard drive Replacement of a laptop computers
battery Installing an OPS Board in a display
A client requires a front projection system. What drawings should be requested from the
client to select the appropriate lens? reflected ceiling plans and elevations building section and
millwork details floor plans and wall details structural and electrical plans
Which of the following is a tracking tool commonly used by project managers? Gantt chart
Flow chart Email Acuity chart
The correct time to discuss visible finishes for wall plates, surface mount speakers, and wall
mounted screen casings is during the: Ordering Installation Site survey Contract award
What best practice should a Technology Manager use when managing AV stock and
inventory? Ensure the proper amount of warehouse space is available for all inventory Check in
orders as they arrive Ensure that the total value of stock and inventory does not exceed a
Which system is used to show colors from a video display? Additive color system
Subtractive color system Plus/minus color system Recover color system
Which phase of an AV project comes immediately AFTER the Program Phase? The Design
Phase Project Planning and Coordination Phase The Verification Phase The Documentation
Phase
The use of __ while troubleshooting provides a reference signal to measure results against.
BluRay Player Multimeter Wireshark Signal Generator
When selecting a DC power supply that has to run a long distance, what must be
considered? RF interference voltage drop cable capacitance inductance
A client requires a new boardroom. The sales person and engineer are sent to the premises
to survey the facility and discuss the opportunity with the client. This process is best described
as a ____ Cost Analysis Functional Analysis Needs Analysis Control Analysis
When planning a new system's security settings, the integration project lead can expect to
discuss requirements with the ___________? End user using the system for company meetings
IT manager responsible for the network it's connecting to Project architect coordinating the
design team Distributor's sales representative that provided technical sales assistance
A junior level technician observes a senior level technician occasionally taking a pen like
device out of her shirt pocket and laying it along other cables in the area of where they are
working. What might the senior technician be doing? Recording modulated signals for further
evaluation after work is completed Using a non-contact voltage detector to verify AC high
voltage is not present Making invisible cable markers so she knows what's already been worked
on Charging her USB backup battery using induction charging technology
When assisting an end user experiencing intermittent display system failures which of
following would be the best customer service follow up question?
, What was being used just prior to the last failure?
Is the modulated cable resolution flag set to "On"?
Can we discuss this later when we're not so busy?
If it doesn't happen frequently can you just ignore?
What is the BEST PRACTICE for deciding between unbalanced and balanced audio cables?
Use unbalanced for cables under 25' (7.6 m) Use unbalanced for cables under 30' (9.1 m) Use
balanced for all cables over 50' (15.2 m) Use balanced for all cables
Which is of the following is TRUE of a decibel? It is a measure of loudness? When
calculating a decibel you would utilize a 20 log function for power. When calculating a decibel
you would utilize a 10 log function for sound pressure. It is a ratio of two numbers meant to
represent the change from a previously measured value to a newly measure value.
What preventive maintenance procedure is illustrated below? Replacement or cleaning of a
projector air filter Removal of laptop computers hard drive Replacement of a laptop computers
battery Installing an OPS Board in a display
A client requires a front projection system. What drawings should be requested from the
client to select the appropriate lens? reflected ceiling plans and elevations building section and
millwork details floor plans and wall details structural and electrical plans
Which of the following is a tracking tool commonly used by project managers? Gantt chart
Flow chart Email Acuity chart
The correct time to discuss visible finishes for wall plates, surface mount speakers, and wall
mounted screen casings is during the: Ordering Installation Site survey Contract award
What best practice should a Technology Manager use when managing AV stock and
inventory? Ensure the proper amount of warehouse space is available for all inventory Check in
orders as they arrive Ensure that the total value of stock and inventory does not exceed a
