AVIXA CTS Sample| Exam Questions with Correct Solutions| Latest Update Graded A+
When terminating a category cable with an 8P8C (RJ-45) connector, it is best practice to untwist
each wire pair: As little as possible to get each wire to enter the proper channel in the
connector
When selecting a DC power supply that has to run a long distance, what must be considered?
voltage drop
A device is controlled using a cable that looks like a VGA cable with 9 pins. What is the MOST
LIKELY method of controlling this device? RS-232
The minimum load safety rating for mounting audio visual equipment is: 5:1
As part of integrating your solution your client indicates that they have certain technologies
enabled on their network that allows defined and flagged traffic to reach its source destination
based upon the priority of the traffic. What does the client have enabled on their network?
Quality Of Service (QOS)
To minimize interference when running cables for microphone and power from the rack to the
room, it is MOST important to create as much space between them when parallel , and cross
at 90 degree angles when perpendicular.
The brightness controls on a display adjusts which level? Black Level
The user guide for an audiovisual system should include: Drawings and instructions on
equipment operation
When training a new user how to operate the AV solution that has been provided, which of the
following is considered a BEST PRACTICE? demonstrate the system from power-up
, When verifying a display system, which of the following should be used to determine if it meets
a specified contrast ratio? Spot Photometer
What document provides a detailed record of all repairs and service work associated with the
Audio Visual systems? Maintenance Log
When striking a room after a live event, what is the BEST way to ensure that nothing gets
missed? Use a plan of action and a set of checklists
AV System Performance Verification Process is also commonly referred to as:
Commissioning
Which of the following is NOT an objective of training end users and support staff on the
operation of an AV system. Eliminate the need for a service contract
The AV Systems Performance Verification Process is BEST described as? A comprehensive
methodology to ensure all elements of an AV system are complete and ready
When working with a client to design an AV solution for a new conference center, the client
requests a detailed budget for the equipment and installation. In what phase does this occur?
Design phase
What is a primary objective of a benchmarking session with a client? Establish a vision for
the audiovisual design
The Architect, Engineers and Consultants are all members of the _________. Design Team
Which phase comes first in a project? The Program Phase
When terminating a category cable with an 8P8C (RJ-45) connector, it is best practice to untwist
each wire pair: As little as possible to get each wire to enter the proper channel in the
connector
When selecting a DC power supply that has to run a long distance, what must be considered?
voltage drop
A device is controlled using a cable that looks like a VGA cable with 9 pins. What is the MOST
LIKELY method of controlling this device? RS-232
The minimum load safety rating for mounting audio visual equipment is: 5:1
As part of integrating your solution your client indicates that they have certain technologies
enabled on their network that allows defined and flagged traffic to reach its source destination
based upon the priority of the traffic. What does the client have enabled on their network?
Quality Of Service (QOS)
To minimize interference when running cables for microphone and power from the rack to the
room, it is MOST important to create as much space between them when parallel , and cross
at 90 degree angles when perpendicular.
The brightness controls on a display adjusts which level? Black Level
The user guide for an audiovisual system should include: Drawings and instructions on
equipment operation
When training a new user how to operate the AV solution that has been provided, which of the
following is considered a BEST PRACTICE? demonstrate the system from power-up
, When verifying a display system, which of the following should be used to determine if it meets
a specified contrast ratio? Spot Photometer
What document provides a detailed record of all repairs and service work associated with the
Audio Visual systems? Maintenance Log
When striking a room after a live event, what is the BEST way to ensure that nothing gets
missed? Use a plan of action and a set of checklists
AV System Performance Verification Process is also commonly referred to as:
Commissioning
Which of the following is NOT an objective of training end users and support staff on the
operation of an AV system. Eliminate the need for a service contract
The AV Systems Performance Verification Process is BEST described as? A comprehensive
methodology to ensure all elements of an AV system are complete and ready
When working with a client to design an AV solution for a new conference center, the client
requests a detailed budget for the equipment and installation. In what phase does this occur?
Design phase
What is a primary objective of a benchmarking session with a client? Establish a vision for
the audiovisual design
The Architect, Engineers and Consultants are all members of the _________. Design Team
Which phase comes first in a project? The Program Phase
