AVIXA CTS ( Sample Question & AV Math) Exam Questions with Correct Solutions| Latest
Update Graded A+
Which of the following statements best describes the limitations of Ethernet traffic?
Ethernet frames can travel through a gateway, but not over the open Internet.
Ethernet frames can travel through a hub, but not a switch.
Ethernet frames can travel through a switch, but not a router.
Ethernet frames can travel through a router, but not a gateway. Ethernet frames can travel
through a switch, but not a router.
The IEEE 802.3 standard defines _____. (Select all that apply.)
Physical Layer requirements for Ethernet traffic
a collision avoidance mechanism for half-duplex networks
the connector pinout for Ethernet cables
the data format for Ethernet frames Physical Layer requirements for Ethernet traffic
a collision avoidance mechanism for half-duplex networks
the data format for Ethernet frames
A 1000BaseT network transmits _____.
10 Mbps broadband signals over fiber optic cables
1 Gbps baseband signals over twisted pair Cat cables
10 Gbps broadband signals over fiber optic cables
1000 bps baseband signals over twisted pair Cat cables 1 Gbps baseband signals over
twisted pair Cat cables
,True or False: In order to be on the same VLAN, devices must be physically connected to the
same switch.
True
False False
True or False: Gigabit Ethernet is used as a network backbone, but not to connect end nodes to
switches.
True
False False
In the field, you are most likely to see 10 Mbps Ethernet used _____.
to interconnect clusters of servers in high capacity computing application
as a long-distance network backbone
to connect end nodes to switches or hubs
to connect private enterprise networks directly to an ISP site to connect end nodes to
switches or hubs
The term Fast Ethernet refers to _____.
10 Mbps Ethernet
100 Mbps Ethernet
1 Gbps Ethernet
10 Gbps Ethernet 100 Mbps Ethernet
To operate in full-duplex mode, Fast Ethernet requires _____.
Cat 3 twisted pair cable or better
,single mode optical fiber
coaxial cable
Cat 5 twisted pair cable or better Cat 5 twisted pair cable or better
True or False: 40/100 Gigabit Ethernet cannot be run over twisted pair Cat cable.
True
False True
Which of the following accurately describe the functionality of a VLAN? (Select all that apply.)
Devices on a VLAN do not receive broadcast traffic from devices outside the VLAN.
Devices on a VLAN can send each other Ethernet frames.
A device in a VLAN can send Ethernet frames to a device that is not in the VLAN as long as they
are connected to the same switch.
A device can only be assigned to one VLAN at a time. Devices on a VLAN do not receive
broadcast traffic from devices outside the VLAN.
Devices on a VLAN can send each other Ethernet frames.
Which groups make up the Management Team? Developer, Construction Manager, and
Building Management Agency
Which group represent the generic roles that are important to the Project process? Project
Managers, Designers and Installers
Which project characteristics must be considered in order to determine which method is best
suited for a particular project? Schedule, Size, Type, Complexity, and Procurement
Requirements
, Whether a construction project is large or small, which milestones must be achieved in a typical
schedule? Programming, Building Design, AV Bid, and Move-In
What is the risk in using an OFE/Integrator Installed contract structure? System and
infrastructure design and facility functionality may suffer
What are some of the important project scope and size considerations in selecting an AV
provider? Financial Stability, Current Workload, and Company Credentials
What is one of the disadvantages of contracting the AV integrator to the
electricalsubcontractor? More layers of responsibility and communication
When conducting a complete project bid process, what milestone follows the issuing of the
RFP? Pre-Bid Meeting
What is the ideal way to contract an AV integrator? Directly to the Owner
What are the four teams that comprise the overall Project Team? Owner, Design,
Installation, and Management
Who would belong to the Design team? Anyone with Consultant in their title except the
moving consultant
The End-User, Facility Manager and Building Committee comprise which team within the
Project Team? Owner
Whether a construction project is large or small, which milestones must be achieved in a typical
schedule? Programming, Building Design, AV Bid, and Move-In
Update Graded A+
Which of the following statements best describes the limitations of Ethernet traffic?
Ethernet frames can travel through a gateway, but not over the open Internet.
Ethernet frames can travel through a hub, but not a switch.
Ethernet frames can travel through a switch, but not a router.
Ethernet frames can travel through a router, but not a gateway. Ethernet frames can travel
through a switch, but not a router.
The IEEE 802.3 standard defines _____. (Select all that apply.)
Physical Layer requirements for Ethernet traffic
a collision avoidance mechanism for half-duplex networks
the connector pinout for Ethernet cables
the data format for Ethernet frames Physical Layer requirements for Ethernet traffic
a collision avoidance mechanism for half-duplex networks
the data format for Ethernet frames
A 1000BaseT network transmits _____.
10 Mbps broadband signals over fiber optic cables
1 Gbps baseband signals over twisted pair Cat cables
10 Gbps broadband signals over fiber optic cables
1000 bps baseband signals over twisted pair Cat cables 1 Gbps baseband signals over
twisted pair Cat cables
,True or False: In order to be on the same VLAN, devices must be physically connected to the
same switch.
True
False False
True or False: Gigabit Ethernet is used as a network backbone, but not to connect end nodes to
switches.
True
False False
In the field, you are most likely to see 10 Mbps Ethernet used _____.
to interconnect clusters of servers in high capacity computing application
as a long-distance network backbone
to connect end nodes to switches or hubs
to connect private enterprise networks directly to an ISP site to connect end nodes to
switches or hubs
The term Fast Ethernet refers to _____.
10 Mbps Ethernet
100 Mbps Ethernet
1 Gbps Ethernet
10 Gbps Ethernet 100 Mbps Ethernet
To operate in full-duplex mode, Fast Ethernet requires _____.
Cat 3 twisted pair cable or better
,single mode optical fiber
coaxial cable
Cat 5 twisted pair cable or better Cat 5 twisted pair cable or better
True or False: 40/100 Gigabit Ethernet cannot be run over twisted pair Cat cable.
True
False True
Which of the following accurately describe the functionality of a VLAN? (Select all that apply.)
Devices on a VLAN do not receive broadcast traffic from devices outside the VLAN.
Devices on a VLAN can send each other Ethernet frames.
A device in a VLAN can send Ethernet frames to a device that is not in the VLAN as long as they
are connected to the same switch.
A device can only be assigned to one VLAN at a time. Devices on a VLAN do not receive
broadcast traffic from devices outside the VLAN.
Devices on a VLAN can send each other Ethernet frames.
Which groups make up the Management Team? Developer, Construction Manager, and
Building Management Agency
Which group represent the generic roles that are important to the Project process? Project
Managers, Designers and Installers
Which project characteristics must be considered in order to determine which method is best
suited for a particular project? Schedule, Size, Type, Complexity, and Procurement
Requirements
, Whether a construction project is large or small, which milestones must be achieved in a typical
schedule? Programming, Building Design, AV Bid, and Move-In
What is the risk in using an OFE/Integrator Installed contract structure? System and
infrastructure design and facility functionality may suffer
What are some of the important project scope and size considerations in selecting an AV
provider? Financial Stability, Current Workload, and Company Credentials
What is one of the disadvantages of contracting the AV integrator to the
electricalsubcontractor? More layers of responsibility and communication
When conducting a complete project bid process, what milestone follows the issuing of the
RFP? Pre-Bid Meeting
What is the ideal way to contract an AV integrator? Directly to the Owner
What are the four teams that comprise the overall Project Team? Owner, Design,
Installation, and Management
Who would belong to the Design team? Anyone with Consultant in their title except the
moving consultant
The End-User, Facility Manager and Building Committee comprise which team within the
Project Team? Owner
Whether a construction project is large or small, which milestones must be achieved in a typical
schedule? Programming, Building Design, AV Bid, and Move-In
