Avixa CTS Exam Practice Questions with Correct Solutions| Latest Update Graded A+
What happens to the connection speed in a Wi-Fi connection if the signal strength declines?
A: Speeds up
B: Stops
C: Slows down
D: Remains constant C: Slows down
Which of the following is a type of fiber-optic cable identified by its yellow outer jacket?
A: ST
B: SC
C: Multimode
D: Single-mode D: Single-mode
The ____ model is a guide that assists with conforming network communications and their
processes to standards.
A: Network interface
B: OSI reference
C: Informal data link
D: Asynchronous transfer mode B: OSI reference
In the OSI model, cabling and patch bays are elements of ______.
A: Layer 2, the Data Link Layer
B: Layer 4, the Transport Layer
,C: Layer 1, the Physical layer
D: Layer 3, the Network layer C: Layer 1, the Physical layer
A _____ address is unique to every device and identifies a network's equipment.
A: Transfer mode
B: Baseband
C: Digital Subscriber Line
D: MAC D: MAC
IP deals with which of the following on a network?
A: Addresses
B: Names
C: Routes
D: Versions A: Addresses
An IPv6 address uses _____ groups of four hexadecimal numbers.
A: Three
B: Eight
C: Six
D: One B: Eight
Subnet masks can indicate how many _____ are allowed on the network.
A: Computers
, B: Gateways
C: Devices
D: Printers C: Devices
What is required to set an IP address manually on a network:
A: IP address and device name
B: Subnet mask and gateway
C: Subnet mask and DNS server
D: IP address and subnet mask D: IP address and subnet mask
Which type of server automatically assigns an IP address to the MAC address during the
device's connection to a network?
A: Gateway
B: Virtual private network
C: DNS
D: DHCP D: DHCP
Which of the following switches just needs to be plugged in and connected to devices?
A: Unmanaged
B: LAN
C: Addressing
D: Managed A: Unmanaged
A ____ sends packets to different locations on a network and connects to outside networks.
What happens to the connection speed in a Wi-Fi connection if the signal strength declines?
A: Speeds up
B: Stops
C: Slows down
D: Remains constant C: Slows down
Which of the following is a type of fiber-optic cable identified by its yellow outer jacket?
A: ST
B: SC
C: Multimode
D: Single-mode D: Single-mode
The ____ model is a guide that assists with conforming network communications and their
processes to standards.
A: Network interface
B: OSI reference
C: Informal data link
D: Asynchronous transfer mode B: OSI reference
In the OSI model, cabling and patch bays are elements of ______.
A: Layer 2, the Data Link Layer
B: Layer 4, the Transport Layer
,C: Layer 1, the Physical layer
D: Layer 3, the Network layer C: Layer 1, the Physical layer
A _____ address is unique to every device and identifies a network's equipment.
A: Transfer mode
B: Baseband
C: Digital Subscriber Line
D: MAC D: MAC
IP deals with which of the following on a network?
A: Addresses
B: Names
C: Routes
D: Versions A: Addresses
An IPv6 address uses _____ groups of four hexadecimal numbers.
A: Three
B: Eight
C: Six
D: One B: Eight
Subnet masks can indicate how many _____ are allowed on the network.
A: Computers
, B: Gateways
C: Devices
D: Printers C: Devices
What is required to set an IP address manually on a network:
A: IP address and device name
B: Subnet mask and gateway
C: Subnet mask and DNS server
D: IP address and subnet mask D: IP address and subnet mask
Which type of server automatically assigns an IP address to the MAC address during the
device's connection to a network?
A: Gateway
B: Virtual private network
C: DNS
D: DHCP D: DHCP
Which of the following switches just needs to be plugged in and connected to devices?
A: Unmanaged
B: LAN
C: Addressing
D: Managed A: Unmanaged
A ____ sends packets to different locations on a network and connects to outside networks.
