1|Page
TFM 11; COMPREHENSIVE ACTUAL
PRACTICE TEST | CERTIFIED EXAM
QUESTIONS WITH ANSWERS
What must an applicant for a Fire Alarm Planning Superintendent furnish the
Marshal with? - Correct-answer-A. Evidence of current registration in Texas as a
registered engineer
Or
B. A notification from NICET confirming the applicant has passed a test in work
elements pertaining to fire systems
How many times can an applicant attempt a test within 12 months? - Correct-
answer-3
Repair is considered restoration to operating condition, or replacement of old
equipment. When you replace old equipment, the new equipment must meet the
latest standards, but the entire system does not need to be brought up to code.
T/F? - Correct-answer-True
,2|Page
What color is an installation label? - Correct-answer-White
When must a fire system be "certified"? - Correct-answer-A. After installation
B. After modification
C. After addition
If a system has a red label attached, after fixing the conditions a _______ label
should be attached certifying that the corrections were made. - Correct-answer-
Service
What is the purpose of a Fire Alarm Plans and Record Drawings tag? - Correct-
answer-To certify that the plans adhere to all codes
Which of the following should a residential white label NOT show? - Correct-
answer-Installation date and Licensee stamped signature and license number
, 3|Page
What does the licensee signature on a service label mean? - Correct-answer-The
service performed complies with the requirements of the law
How many years must a service label stay in place? (with the exception of a Fire
Marshal removing it) - Correct-answer-2
If is a system is resulting in a fault condition a _______ label should be placed with
black lettering on the outside of the control panel or in a permanent location. -
Correct-answer-Red
If, after any service, inspection or test, a system does NOT comply with applicable
codes and standards at the time of install a _________ label should be placed
with black lettering on the outside of the control panel or in a permanent
location. - Correct-answer-Yellow
When should a blue label be used? - Correct-answer-It shows that an inspection
or test has taken place
When should a yellow label be used? - Correct-answer-The system does not
meet applicable codes and standards
TFM 11; COMPREHENSIVE ACTUAL
PRACTICE TEST | CERTIFIED EXAM
QUESTIONS WITH ANSWERS
What must an applicant for a Fire Alarm Planning Superintendent furnish the
Marshal with? - Correct-answer-A. Evidence of current registration in Texas as a
registered engineer
Or
B. A notification from NICET confirming the applicant has passed a test in work
elements pertaining to fire systems
How many times can an applicant attempt a test within 12 months? - Correct-
answer-3
Repair is considered restoration to operating condition, or replacement of old
equipment. When you replace old equipment, the new equipment must meet the
latest standards, but the entire system does not need to be brought up to code.
T/F? - Correct-answer-True
,2|Page
What color is an installation label? - Correct-answer-White
When must a fire system be "certified"? - Correct-answer-A. After installation
B. After modification
C. After addition
If a system has a red label attached, after fixing the conditions a _______ label
should be attached certifying that the corrections were made. - Correct-answer-
Service
What is the purpose of a Fire Alarm Plans and Record Drawings tag? - Correct-
answer-To certify that the plans adhere to all codes
Which of the following should a residential white label NOT show? - Correct-
answer-Installation date and Licensee stamped signature and license number
, 3|Page
What does the licensee signature on a service label mean? - Correct-answer-The
service performed complies with the requirements of the law
How many years must a service label stay in place? (with the exception of a Fire
Marshal removing it) - Correct-answer-2
If is a system is resulting in a fault condition a _______ label should be placed with
black lettering on the outside of the control panel or in a permanent location. -
Correct-answer-Red
If, after any service, inspection or test, a system does NOT comply with applicable
codes and standards at the time of install a _________ label should be placed
with black lettering on the outside of the control panel or in a permanent
location. - Correct-answer-Yellow
When should a blue label be used? - Correct-answer-It shows that an inspection
or test has taken place
When should a yellow label be used? - Correct-answer-The system does not
meet applicable codes and standards
