ALVON
Illinois Field Crop
Applicators Test
1. What is the main purpose of using a surfactant in pesticide applications?
A) To increase the pesticide’s toxicity
B) To improve pesticide adherence and spread on plant surfaces
C) To dilute the pesticide solution
D) To neutralize the pesticide’s active ingredient
Answer: B) To improve pesticide adherence and spread on plant surfaces
2. When calibrating a pesticide sprayer, what is the first step?
A) Measure the nozzle output
,ALVON
B) Determine the desired application rate
C) Calculate the area to be sprayed
D) Check the pressure gauge
Answer: B) Determine the desired application rate
3. What is the most important reason to avoid spraying pesticides when wind speeds
are above 10 mph?
A) Reduced pesticide effectiveness
B) Increased risk of pesticide drift to non-target areas
C) Pesticides degrade faster
D) Equipment damage
Answer: B) Increased risk of pesticide drift to non-target areas
4. Which personal protective equipment (PPE) is typically required when handling
most pesticides?
A) Gloves, long-sleeved shirt, long pants, and eye protection
B) Short-sleeved shirt and hat
C) Sandals and a T-shirt
D) Respirator only
Answer: A) Gloves, long-sleeved shirt, long pants, and eye protection
5. What is the minimum distance that pesticide containers and mixing areas should
be located from wells or water sources to prevent contamination?
A) 5 feet
B) 10 feet
C) 50 feet
D) 100 feet
Answer: D) 100 feet
, ALVON
6. What should you do if you accidentally spill pesticide on your skin?
A) Wipe it off with a dry cloth
B) Rinse the area immediately with plenty of water and remove contaminated
clothing
C) Wait for it to dry and then wash later
D) Apply an antidote cream immediately
Answer: B) Rinse the area immediately with plenty of water and remove
contaminated clothing
7. How often should you clean your pesticide application equipment?
A) Only after every 10 applications
B) After each use to prevent cross-contamination and maintain equipment
performance
C) Once a year
D) Never, if using the same pesticide
Answer: B) After each use to prevent cross-contamination and maintain equipment
performance
8. Under Illinois pesticide regulations, what is required to legally apply restricted use
pesticides?
A) A valid Illinois pesticide applicator license
B) A driver’s license
C) No special requirement
D) Just verbal permission from the landowner
Answer: A) A valid Illinois pesticide applicator license
9. Which of the following best describes Integrated Pest Management (IPM)?
A) Applying pesticides on a fixed schedule regardless of pest presence
Illinois Field Crop
Applicators Test
1. What is the main purpose of using a surfactant in pesticide applications?
A) To increase the pesticide’s toxicity
B) To improve pesticide adherence and spread on plant surfaces
C) To dilute the pesticide solution
D) To neutralize the pesticide’s active ingredient
Answer: B) To improve pesticide adherence and spread on plant surfaces
2. When calibrating a pesticide sprayer, what is the first step?
A) Measure the nozzle output
,ALVON
B) Determine the desired application rate
C) Calculate the area to be sprayed
D) Check the pressure gauge
Answer: B) Determine the desired application rate
3. What is the most important reason to avoid spraying pesticides when wind speeds
are above 10 mph?
A) Reduced pesticide effectiveness
B) Increased risk of pesticide drift to non-target areas
C) Pesticides degrade faster
D) Equipment damage
Answer: B) Increased risk of pesticide drift to non-target areas
4. Which personal protective equipment (PPE) is typically required when handling
most pesticides?
A) Gloves, long-sleeved shirt, long pants, and eye protection
B) Short-sleeved shirt and hat
C) Sandals and a T-shirt
D) Respirator only
Answer: A) Gloves, long-sleeved shirt, long pants, and eye protection
5. What is the minimum distance that pesticide containers and mixing areas should
be located from wells or water sources to prevent contamination?
A) 5 feet
B) 10 feet
C) 50 feet
D) 100 feet
Answer: D) 100 feet
, ALVON
6. What should you do if you accidentally spill pesticide on your skin?
A) Wipe it off with a dry cloth
B) Rinse the area immediately with plenty of water and remove contaminated
clothing
C) Wait for it to dry and then wash later
D) Apply an antidote cream immediately
Answer: B) Rinse the area immediately with plenty of water and remove
contaminated clothing
7. How often should you clean your pesticide application equipment?
A) Only after every 10 applications
B) After each use to prevent cross-contamination and maintain equipment
performance
C) Once a year
D) Never, if using the same pesticide
Answer: B) After each use to prevent cross-contamination and maintain equipment
performance
8. Under Illinois pesticide regulations, what is required to legally apply restricted use
pesticides?
A) A valid Illinois pesticide applicator license
B) A driver’s license
C) No special requirement
D) Just verbal permission from the landowner
Answer: A) A valid Illinois pesticide applicator license
9. Which of the following best describes Integrated Pest Management (IPM)?
A) Applying pesticides on a fixed schedule regardless of pest presence
