1
Mechanics Exam NEIEP Questions with
Correct Answers for Specific Exam Mail
What is the time constant for a circuit with 150KOhms and a 2 microfarad
capacitor?
Ans: .3 seconds
What must be done before checking pump drive belts on a hydraulic
elevator
Ans: Pull the main disconnect switch
Which of the following best describes the danger posed be the
counterweight assembly when you are riding the car top?
Ans: It run close by in the opposite direction
Why must you place a hydraulic elevator car on jack posts before servicing
the packing head?
Ans: Because a hydraulic elevator is supported by a column of oil.
Why can't Elevator Constructors use a metal ladder?
Ans: Metal ladders conduct electricity
What is the function of a Ground Fault Circuit Interrupter?
Ans: To detect and imbalance in current between the hot and nuetral wires
Pretest - Stuvia US
,2
How do you determine the correct angle from the vertical for placing a
ladder
Ans: Measure out a distance of 1/4 the height.
Who is required to furnish you the necessary safety equipment?
Ans: Your employer
What device must be in working condition in order to use an elevator car
sling as a running platform
Ans: The governor and safeties.
What hazardous condition can occur if the weight of the temporary car and
counterweight are not kept nearly equal?
Ans: Traction could be lost
What is the name of the document that lists the hazards of a substance?
Ans: Material Safety Data Sheet or Safety Data Sheet
Who is responsible for making sure barricades are kept in place?
Ans: Everyone on the job
Who is primarily responsible for your safety on the job?
Ans: You, Yourself
Which agency guarantees your right to a safe workplace?
Pretest - Stuvia US
,3
Ans: OSHA
Which of the following is not a typical elevator repair?
Ans:
Which of the following makes a good substitute for a ladder?
Ans: Never substitute anything
How should you proceed to et a toolbox to the machine room when
climbing a vertical ladder?
Ans: Climb the ladder and pull the box up with a rope
What is the safest way to lubricate hoist ropes?
Ans: With a rope lubricator
What supports a hydraulic elevator?
Ans: The column of oil inside the jack
What is the first thing you must do before performing any service on an
elevator
Ans: Place barricades at the upper and lower ends
When a roller bearing needs to be pressed onto a shaft, what type of
allowance does the shaft have?
Pretest - Stuvia US
, 4
Ans: Negative allowance
How are threads specified on metric bolts?
Ans:
What is the tolerance accepted in the elevator industry?
Ans: +- 1/64
What type of locking device uses a second nut run up against the first which
flattens when tightened?
Ans:
How many possible views are there available from drawings using
orthographic projections?
Ans:
Best Describe Layout Drawings
Ans: A mechanical drawing showing plans and elevation views of the
elevator installation
What document provides information on the number of doors for an
installation and their color?
Ans: Job Abstract
What is the purpose of the elevation view found in the final layouts?
Pretest - Stuvia US
Mechanics Exam NEIEP Questions with
Correct Answers for Specific Exam Mail
What is the time constant for a circuit with 150KOhms and a 2 microfarad
capacitor?
Ans: .3 seconds
What must be done before checking pump drive belts on a hydraulic
elevator
Ans: Pull the main disconnect switch
Which of the following best describes the danger posed be the
counterweight assembly when you are riding the car top?
Ans: It run close by in the opposite direction
Why must you place a hydraulic elevator car on jack posts before servicing
the packing head?
Ans: Because a hydraulic elevator is supported by a column of oil.
Why can't Elevator Constructors use a metal ladder?
Ans: Metal ladders conduct electricity
What is the function of a Ground Fault Circuit Interrupter?
Ans: To detect and imbalance in current between the hot and nuetral wires
Pretest - Stuvia US
,2
How do you determine the correct angle from the vertical for placing a
ladder
Ans: Measure out a distance of 1/4 the height.
Who is required to furnish you the necessary safety equipment?
Ans: Your employer
What device must be in working condition in order to use an elevator car
sling as a running platform
Ans: The governor and safeties.
What hazardous condition can occur if the weight of the temporary car and
counterweight are not kept nearly equal?
Ans: Traction could be lost
What is the name of the document that lists the hazards of a substance?
Ans: Material Safety Data Sheet or Safety Data Sheet
Who is responsible for making sure barricades are kept in place?
Ans: Everyone on the job
Who is primarily responsible for your safety on the job?
Ans: You, Yourself
Which agency guarantees your right to a safe workplace?
Pretest - Stuvia US
,3
Ans: OSHA
Which of the following is not a typical elevator repair?
Ans:
Which of the following makes a good substitute for a ladder?
Ans: Never substitute anything
How should you proceed to et a toolbox to the machine room when
climbing a vertical ladder?
Ans: Climb the ladder and pull the box up with a rope
What is the safest way to lubricate hoist ropes?
Ans: With a rope lubricator
What supports a hydraulic elevator?
Ans: The column of oil inside the jack
What is the first thing you must do before performing any service on an
elevator
Ans: Place barricades at the upper and lower ends
When a roller bearing needs to be pressed onto a shaft, what type of
allowance does the shaft have?
Pretest - Stuvia US
, 4
Ans: Negative allowance
How are threads specified on metric bolts?
Ans:
What is the tolerance accepted in the elevator industry?
Ans: +- 1/64
What type of locking device uses a second nut run up against the first which
flattens when tightened?
Ans:
How many possible views are there available from drawings using
orthographic projections?
Ans:
Best Describe Layout Drawings
Ans: A mechanical drawing showing plans and elevation views of the
elevator installation
What document provides information on the number of doors for an
installation and their color?
Ans: Job Abstract
What is the purpose of the elevation view found in the final layouts?
Pretest - Stuvia US
