NFI Review Questions and Answers
(Codes)
UL103HT
These requirements cover factory-built chimneys intended for venting gas, liquid, and solid-fuel fired
residential-type appliances and building heating appliances
The maximum chimney offset angle permitted in the United States is __________ degrees (from
vertical).
30 degrees
What is UL 1618?
(2 types of manufactured pads)
1. Type 1. Ember protection
2. Type 2 thermal floor protection
, Type 1 floor protection
Can be used on appliances that do not require thermal protection
Type 2 floor protection
· For appliances req. to heave thermal protection
· Must have an R value of 1.0
· R-value must equal or exceed minimum R value needed
R-Value
Measure of heat resistance
Gas products standards written by____________
ANSI (American National Standards Institute)
(Codes)
UL103HT
These requirements cover factory-built chimneys intended for venting gas, liquid, and solid-fuel fired
residential-type appliances and building heating appliances
The maximum chimney offset angle permitted in the United States is __________ degrees (from
vertical).
30 degrees
What is UL 1618?
(2 types of manufactured pads)
1. Type 1. Ember protection
2. Type 2 thermal floor protection
, Type 1 floor protection
Can be used on appliances that do not require thermal protection
Type 2 floor protection
· For appliances req. to heave thermal protection
· Must have an R value of 1.0
· R-value must equal or exceed minimum R value needed
R-Value
Measure of heat resistance
Gas products standards written by____________
ANSI (American National Standards Institute)