NACE CIP Level 1 UPDATED ACTUAL
Exam Questions and CORRECT Answers
SSPC-SP15 - CORRECT ANSWER - Commercial grade power tool cleaning
SSPC-SP16 - CORRECT ANSWER - Brush-off blast cleaning of Non Ferrous Metals
SSPC-SP 14 - CORRECT ANSWER - Industrial Blast Cleaning
10% Stain
SSPC-SP13 - CORRECT ANSWER - Surface prep of concrete
SSPC-SP7 - CORRECT ANSWER - Brush off blast cleaning
NACE SP0178 - CORRECT ANSWER - Design, fabrication, and surface finish practices for
tanks and vessels to be lined for immersion service.
SSPC-SP 11 - CORRECT ANSWER - Power Tool Cleaning to Bare Metal
SSPC-PA2 - CORRECT ANSWER - Measurement of Dry Coat Thickness with magnetic
gauges.
SSPC-SP10/NACE 2 limits staining to ______per each unit area - CORRECT ANSWER -
5%
Near White Commercial Blast
SSPC-SP6/NACE 3 limits staining to _______per each unit area - CORRECT ANSWER -
33%
,Commercial Blasts
NACE SP0188 - CORRECT ANSWER - holiday testing
SSPC-SP1 - CORRECT ANSWER - Solvent Cleaning
SSPC-SP5/NACE 1 limits staining to _________per each unit area - CORRECT ANSWER -
0%
White Metal Blast
SSPC-SP3 - CORRECT ANSWER - Power Tool Cleaning
SSPC-SP2 - CORRECT ANSWER - Hand Tool Cleaning
ASTM D 4417 - CORRECT ANSWER - surface profile blast cleaned steel
SA-3 - CORRECT ANSWER - Blast Cleaning to Visually Clean Steel
SA 2 1/2 - CORRECT ANSWER - Very Thorough Blast Cleaning
Sa 2 - CORRECT ANSWER - Thorough Blast Cleaning
SA 1 - CORRECT ANSWER - Light Blast Cleaning
St 3 - CORRECT ANSWER - Very Thorough Hand and Power Tool Cleaning
St 2 - CORRECT ANSWER - Thorough Hand and Power Tool Cleaning
, 2 Non-convertible coating types - CORRECT ANSWER - 1. Evaporation cure 2. Coalescence
cure
SSPC-VIS1 Defines surface covered with and rust as what grade? - CORRECT ANSWER -
Grade B
SSPC-SP2
ISO St 3
ISO St 2
All deal with hand tool Cleaning. True or false? - CORRECT ANSWER - True
Acrylic - CORRECT ANSWER - A plastic resin that, when mixed with water and pigment,
forms an inorganic and quick-drying paint medium.
-Excellent UV and weather resistance
Polyaspartic - CORRECT ANSWER - -Used to achieve low or near zero VOC systems
-pot lives from 5 minutes to several hours
-Film builds up to (15 mils) DFT in a single pass
Phenolic - CORRECT ANSWER - Typically used where low PH environments and Higher
Temperature are factors
latex (Emulsions) - CORRECT ANSWER - -Resins normally thermoplastic resin types
-Coalescence curing
(Non-convertible)
Furans - CORRECT ANSWER - -Applied by Brick layers not coating applicators.
Exam Questions and CORRECT Answers
SSPC-SP15 - CORRECT ANSWER - Commercial grade power tool cleaning
SSPC-SP16 - CORRECT ANSWER - Brush-off blast cleaning of Non Ferrous Metals
SSPC-SP 14 - CORRECT ANSWER - Industrial Blast Cleaning
10% Stain
SSPC-SP13 - CORRECT ANSWER - Surface prep of concrete
SSPC-SP7 - CORRECT ANSWER - Brush off blast cleaning
NACE SP0178 - CORRECT ANSWER - Design, fabrication, and surface finish practices for
tanks and vessels to be lined for immersion service.
SSPC-SP 11 - CORRECT ANSWER - Power Tool Cleaning to Bare Metal
SSPC-PA2 - CORRECT ANSWER - Measurement of Dry Coat Thickness with magnetic
gauges.
SSPC-SP10/NACE 2 limits staining to ______per each unit area - CORRECT ANSWER -
5%
Near White Commercial Blast
SSPC-SP6/NACE 3 limits staining to _______per each unit area - CORRECT ANSWER -
33%
,Commercial Blasts
NACE SP0188 - CORRECT ANSWER - holiday testing
SSPC-SP1 - CORRECT ANSWER - Solvent Cleaning
SSPC-SP5/NACE 1 limits staining to _________per each unit area - CORRECT ANSWER -
0%
White Metal Blast
SSPC-SP3 - CORRECT ANSWER - Power Tool Cleaning
SSPC-SP2 - CORRECT ANSWER - Hand Tool Cleaning
ASTM D 4417 - CORRECT ANSWER - surface profile blast cleaned steel
SA-3 - CORRECT ANSWER - Blast Cleaning to Visually Clean Steel
SA 2 1/2 - CORRECT ANSWER - Very Thorough Blast Cleaning
Sa 2 - CORRECT ANSWER - Thorough Blast Cleaning
SA 1 - CORRECT ANSWER - Light Blast Cleaning
St 3 - CORRECT ANSWER - Very Thorough Hand and Power Tool Cleaning
St 2 - CORRECT ANSWER - Thorough Hand and Power Tool Cleaning
, 2 Non-convertible coating types - CORRECT ANSWER - 1. Evaporation cure 2. Coalescence
cure
SSPC-VIS1 Defines surface covered with and rust as what grade? - CORRECT ANSWER -
Grade B
SSPC-SP2
ISO St 3
ISO St 2
All deal with hand tool Cleaning. True or false? - CORRECT ANSWER - True
Acrylic - CORRECT ANSWER - A plastic resin that, when mixed with water and pigment,
forms an inorganic and quick-drying paint medium.
-Excellent UV and weather resistance
Polyaspartic - CORRECT ANSWER - -Used to achieve low or near zero VOC systems
-pot lives from 5 minutes to several hours
-Film builds up to (15 mils) DFT in a single pass
Phenolic - CORRECT ANSWER - Typically used where low PH environments and Higher
Temperature are factors
latex (Emulsions) - CORRECT ANSWER - -Resins normally thermoplastic resin types
-Coalescence curing
(Non-convertible)
Furans - CORRECT ANSWER - -Applied by Brick layers not coating applicators.
