NFPA 70E II Midterm Exam 2025
Questions and Answers
NFPA 70E requires the employer to implement and document a _____ program. - ANSWER✔✔-
Electrical Safety
Article ____ covers safety related maintenance requirements for fuses and circuit breakers. -
ANSWER✔✔-225
Article ____ outlines what is covered and not covered by NFPA 70E. - ANSWER✔✔-90
NFPA 70E requires that emergency response training be documented T/F - ANSWER✔✔-T
The scope of article 100 indicates that each term or phrase used within NFPA 70E is defined in
Article 100 when it's definition is not likely to be well understood. T/F - ANSWER✔✔-T
Unqualified persons must be trained in any safety-related work practices necessary for their safety,
and this training must be documented and on file for the duration of their employment T/F -
ANSWER✔✔-T
The host employer is required to provide the contract employer with the information about the
installation necessary to make the assessments required by chapter 1 of NFPA 70E T/F -
ANSWER✔✔-T
FOR STUDY PURPOSES ONLY COPYRIGHT © 2025 ALL RIGHTS RESERVED 1
, The title of UL 61010-1 is "Safety Requirements for Electrical Equipment for Measurement,
Control, and Laboratory Use, Part 1: General Requirements, for rating, overvoltage, category, and
design requirements for voltage measurement and test instruments intended for use on electrical
systems 1000v and below" T/F - ANSWER✔✔-T
Article ____ contains the provisions related to work involving electrical hazards. - ANSWER✔✔-
130
The title of informative annex J is _____? - ANSWER✔✔-Energized electrical work permit
The overcurrent protection devices used in panelboards are either _____ or _____. -
ANSWER✔✔-Molded Case Circuit Breakers/Fuses
The maximum ampere rating at which panelboards are available is ________. - ANSWER✔✔-
1200A
Which is NOT one of the 3 common types of circuit breakers that are used in low-voltage electrical
distribution systems for protection of services, feeders, or branch circuits? - ANSWER✔✔-
Supplementary protector
What type of circuit breaker has a mechanical over the center on/off toggle handle? -
ANSWER✔✔-Molded Case Circuit Breaker
What types(s) of circuit breaker has a mechanically operated and electrically operated 2 step stored
energy process to operate the on/off function via push buttons? - ANSWER✔✔-Molded Case
Circuit Breakers/Insulated Case Circuit Breakers
FOR STUDY PURPOSES ONLY COPYRIGHT © 2025 ALL RIGHTS RESERVED 2
Questions and Answers
NFPA 70E requires the employer to implement and document a _____ program. - ANSWER✔✔-
Electrical Safety
Article ____ covers safety related maintenance requirements for fuses and circuit breakers. -
ANSWER✔✔-225
Article ____ outlines what is covered and not covered by NFPA 70E. - ANSWER✔✔-90
NFPA 70E requires that emergency response training be documented T/F - ANSWER✔✔-T
The scope of article 100 indicates that each term or phrase used within NFPA 70E is defined in
Article 100 when it's definition is not likely to be well understood. T/F - ANSWER✔✔-T
Unqualified persons must be trained in any safety-related work practices necessary for their safety,
and this training must be documented and on file for the duration of their employment T/F -
ANSWER✔✔-T
The host employer is required to provide the contract employer with the information about the
installation necessary to make the assessments required by chapter 1 of NFPA 70E T/F -
ANSWER✔✔-T
FOR STUDY PURPOSES ONLY COPYRIGHT © 2025 ALL RIGHTS RESERVED 1
, The title of UL 61010-1 is "Safety Requirements for Electrical Equipment for Measurement,
Control, and Laboratory Use, Part 1: General Requirements, for rating, overvoltage, category, and
design requirements for voltage measurement and test instruments intended for use on electrical
systems 1000v and below" T/F - ANSWER✔✔-T
Article ____ contains the provisions related to work involving electrical hazards. - ANSWER✔✔-
130
The title of informative annex J is _____? - ANSWER✔✔-Energized electrical work permit
The overcurrent protection devices used in panelboards are either _____ or _____. -
ANSWER✔✔-Molded Case Circuit Breakers/Fuses
The maximum ampere rating at which panelboards are available is ________. - ANSWER✔✔-
1200A
Which is NOT one of the 3 common types of circuit breakers that are used in low-voltage electrical
distribution systems for protection of services, feeders, or branch circuits? - ANSWER✔✔-
Supplementary protector
What type of circuit breaker has a mechanical over the center on/off toggle handle? -
ANSWER✔✔-Molded Case Circuit Breaker
What types(s) of circuit breaker has a mechanically operated and electrically operated 2 step stored
energy process to operate the on/off function via push buttons? - ANSWER✔✔-Molded Case
Circuit Breakers/Insulated Case Circuit Breakers
FOR STUDY PURPOSES ONLY COPYRIGHT © 2025 ALL RIGHTS RESERVED 2
