BICSI FINAL EXAM PRACTICE TEST.
The 2 main considerations concerning the existing cabling are? - CORRECT ANSWER Grandfathered
system
Abandoned cable 11-25
The type of cutover where cross-connects are relocated one pair after another until completed is called
a - CORRECT ANSWER rolling cut 11-28
Which practice involves moving the customer to a temporary office space until their section of the
retrofit is completed and then moving them back to their recabled office space? - CORRECT ANSWER
Swing space phasing
Which of these testers would you clamp around a strand of fiber to check for the presence of light? -
CORRECT ANSWER Fiber strand identifier 11-11
A ______ provides a quick graphical representation of how the circuit is layed out? - CORRECT ANSWER
CLR 11-27
A ______ uses several pluggable modules to locate and Identify cables. - CORRECT ANSWER Office
locator kit
A _________ injects light (at a proper wavelength) and measures the results t the other end. - CORRECT
ANSWER Light source and power meter
A ________ detects the presence of light within a fiber strand - CORRECT ANSWER Fiber strand
identifier
A _______ uses a laser to identify fiber strands and find breaks in the fiber at the near end. - CORRECT
ANSWER Visual fault locator
, A________ will leave the customer momentarily without communications - CORRECT ANSWER Hot-cut
11-28
During a _______, cross-connects are relocated one pair after another until completed. - CORRECT
ANSWER Rolling cut
*_________ is a property of an electromagnetic field built around a conductor that opposes any changes
in current flow in a circuit. - CORRECT ANSWER Inductance
____________ is a property of conductors that allows storage of electrical charges when potential
differences (voltages) exist between the conductors. - CORRECT ANSWER Capacitance
*In AC circuits, the total opposition to current flow is called _________, which is measured in ohms. -
CORRECT ANSWER Impedance
The nominal characteristic impedance of balanced twisted pair cable is _______ ohms at 100 MHz -
CORRECT ANSWER 100
Pair 626 would be in the __________ Super Binder - CORRECT ANSWER Red
Series ______ is the preferred choice for longer runs - CORRECT ANSWER 11
The _________ connector/s have center pins (choose all that apply) - CORRECT ANSWER N
BNC
The way in which others perceive an employee can be divided into 3 distinct areas: body language, Tone
of voice and choice of words. Which of the 3 makes the biggest impression? - CORRECT ANSWER Body
language - 55%
The range of human hearing is from _________ - CORRECT ANSWER 20 Hz- 20,000 Hz
An increase of _______ will result in a doubling or halving of the power. - CORRECT ANSWER 3 dB
The 2 main considerations concerning the existing cabling are? - CORRECT ANSWER Grandfathered
system
Abandoned cable 11-25
The type of cutover where cross-connects are relocated one pair after another until completed is called
a - CORRECT ANSWER rolling cut 11-28
Which practice involves moving the customer to a temporary office space until their section of the
retrofit is completed and then moving them back to their recabled office space? - CORRECT ANSWER
Swing space phasing
Which of these testers would you clamp around a strand of fiber to check for the presence of light? -
CORRECT ANSWER Fiber strand identifier 11-11
A ______ provides a quick graphical representation of how the circuit is layed out? - CORRECT ANSWER
CLR 11-27
A ______ uses several pluggable modules to locate and Identify cables. - CORRECT ANSWER Office
locator kit
A _________ injects light (at a proper wavelength) and measures the results t the other end. - CORRECT
ANSWER Light source and power meter
A ________ detects the presence of light within a fiber strand - CORRECT ANSWER Fiber strand
identifier
A _______ uses a laser to identify fiber strands and find breaks in the fiber at the near end. - CORRECT
ANSWER Visual fault locator
, A________ will leave the customer momentarily without communications - CORRECT ANSWER Hot-cut
11-28
During a _______, cross-connects are relocated one pair after another until completed. - CORRECT
ANSWER Rolling cut
*_________ is a property of an electromagnetic field built around a conductor that opposes any changes
in current flow in a circuit. - CORRECT ANSWER Inductance
____________ is a property of conductors that allows storage of electrical charges when potential
differences (voltages) exist between the conductors. - CORRECT ANSWER Capacitance
*In AC circuits, the total opposition to current flow is called _________, which is measured in ohms. -
CORRECT ANSWER Impedance
The nominal characteristic impedance of balanced twisted pair cable is _______ ohms at 100 MHz -
CORRECT ANSWER 100
Pair 626 would be in the __________ Super Binder - CORRECT ANSWER Red
Series ______ is the preferred choice for longer runs - CORRECT ANSWER 11
The _________ connector/s have center pins (choose all that apply) - CORRECT ANSWER N
BNC
The way in which others perceive an employee can be divided into 3 distinct areas: body language, Tone
of voice and choice of words. Which of the 3 makes the biggest impression? - CORRECT ANSWER Body
language - 55%
The range of human hearing is from _________ - CORRECT ANSWER 20 Hz- 20,000 Hz
An increase of _______ will result in a doubling or halving of the power. - CORRECT ANSWER 3 dB
