answers
What is the difference between area A and area B on the airport depicted? ✔✔"A" may be used
for taxi and takeoff; "E" may be used only as an overrun
(Refer to figure 49 on page 4-13)
Area C on the airport depicted is classified as a ✔✔closed runway
(Refer to figure 50)
The arrows that appear on the end of the north /south runway indicate that the area ✔✔cannot
be used for landing, but may be used for taxiing and takeoff
The number 9 and 27 on a runway indicate that the runway is oriented approximately ✔✔090
degrees and 270 degrees magnetic
(refer to figure 50)
select the proper traffic pattern and runway for landing ✔✔Right hand traffic and runway 18
Fig 50
If the wind is shown by the landing direction indicator, the pilot should land on ✔✔Runway 18
and expect a crosswind from the right
(fig 51)
, The segmented circle indicates that the airport traffic is ✔✔left hand for runway 36 and right
hand for runway 18
(fig 51)
The traffic patterns indicated in the segmented circle have been arranged to avoid flights over
the area to the ✔✔southeast
(fig 51)
The segmented circle indicated that a lading on runway 26 will be with a ✔✔right quartering
headwind
(fig 51)
Which runway and traffic pattern should be used as indicated by the wind cone in the
segmented circle? ✔✔Left hand traffic on runway 36
Who should not participate in land and hold short operations (LAHSO)? ✔✔student pilots
Who has final authority to accept or decline any (LAHSO) clearance? ✔✔pilot in command
When should pilots decline a land and hold short (LAHSO) clearance? ✔✔When it will
compromise safety.
Where is the "Available Landing Distance", (ALD) data published for an airpot that utilizes Land
and Hold Short Operations (LAHSO) published? ✔✔Special Notices section of the Airport Facility
Directory (A/FD)