Engineering Design Final Exam Review
The following coordinates systems are used in CADD system - correct answerRelative,
polar, and absolute coordinates
Solid modeling is - correct answerThe process in which a pet can be designed as a
model.
If you used a CADD system to draw a line from (13,6) to a distance of 3.5 at an angle of
57 degrees you are using - correct answerPolar coordinates
The acronym CIM refers to - correct answerComputer Integrated Manufacturing
A ______ is described by these coordinates (0,0),(7,0),(7,4),(0,4) - correct
answerSquare
An example of a solid primitive is a _______ - correct answerCylinder
When an exterior corner has a smooth edge, it is called a _______ - correct
answerRound
Hidden lines _________, and ___________. - correct answertake precedence over
centerline, should be kept in all views.
If a centerline, a hidden line, and an object line all occur at the same space in a multi
view drawing, the ________ takes precedence. - correct answerObject line
The height of an object shown in a multi view drawing is common between... - correct
answerThe front view and the right side view.
Most products are made from the _______ that allow you to view an object with the line
of sight perpendicular to the surface you are looking at. - correct answerOrthographic
drawings
When a drawing is created where details of parts are combined on the same sheet with
an assembly of those parts, a ________ is the result. - correct answerdetail assembly
A __________ can general include a description, arterial identification, and quantities. -
correct answerparts list
If a circle has a DIA. of 2-3/8", 1 _______ is the radius - correct answer1-3/16"
When using the TRIM command, select ________ first - correct answerthe cutting
edges
The following coordinates systems are used in CADD system - correct answerRelative,
polar, and absolute coordinates
Solid modeling is - correct answerThe process in which a pet can be designed as a
model.
If you used a CADD system to draw a line from (13,6) to a distance of 3.5 at an angle of
57 degrees you are using - correct answerPolar coordinates
The acronym CIM refers to - correct answerComputer Integrated Manufacturing
A ______ is described by these coordinates (0,0),(7,0),(7,4),(0,4) - correct
answerSquare
An example of a solid primitive is a _______ - correct answerCylinder
When an exterior corner has a smooth edge, it is called a _______ - correct
answerRound
Hidden lines _________, and ___________. - correct answertake precedence over
centerline, should be kept in all views.
If a centerline, a hidden line, and an object line all occur at the same space in a multi
view drawing, the ________ takes precedence. - correct answerObject line
The height of an object shown in a multi view drawing is common between... - correct
answerThe front view and the right side view.
Most products are made from the _______ that allow you to view an object with the line
of sight perpendicular to the surface you are looking at. - correct answerOrthographic
drawings
When a drawing is created where details of parts are combined on the same sheet with
an assembly of those parts, a ________ is the result. - correct answerdetail assembly
A __________ can general include a description, arterial identification, and quantities. -
correct answerparts list
If a circle has a DIA. of 2-3/8", 1 _______ is the radius - correct answer1-3/16"
When using the TRIM command, select ________ first - correct answerthe cutting
edges
