QUESTIONS WITH ANSWERS RATED A+
✔✔the cof holder shall know the location of all sprinkler heads, control valves, supply
lines and _________ rooms. - ✔✔compactor
✔✔a sign indicating the location of all _______ shall be kept in the compactor room. -
✔✔control valves
✔✔all indicating valves in the compactor sprinkler system shall be ________ open. -
✔✔sealed
✔✔a minimum of _________ extra sprinkler heads with the appropriate wrenches shall
be available to replaced damaged ones - ✔✔6
✔✔the cof holder shall conduct an inspection of the entire sprinkler system at least
__________. - ✔✔once a month
✔✔automatic ball drip devices shall be installed in the _________ position. -
✔✔horizontal
✔✔if the sprinkler sys. Is supplied from public water main, the control valve sign may
read ________________. - ✔✔"shutoff for sprinkler sys. Located 6 feet from this sign"
✔✔gate valves of the non-indicating type are called ________. - ✔✔curb valves
✔✔in an outside stem and yolk valve (os&y), valve position is indicated by the position
of the ____________. - ✔✔stem
✔✔on a post indicator valve (piv), the position of the valve is shown through a
___________. - ✔✔telltale
✔✔fdny connections to automatic sprinkler systems shall be painted ___________. -
✔✔green
✔✔fdny connections to non-automatic sprinkler systems shall be painted ___________.
- ✔✔silver
✔✔fdny connections to standpipe systems shall be painted ____________. - ✔✔red
✔✔fdny connections to a combined standpipe/sprinkler system shall be painted
___________. - ✔✔yellow
, ✔✔fdny connections shall be fitted with a lower check valve. This will prevent ________
of water. - ✔✔backflow
✔✔pressure tanks should be kept ________ full and be maintained at or above
________ psi. - ✔✔2/3, 75
✔✔___________ are designed to take water from a supply and discharge it under
pressure. - ✔✔fire pumps
✔✔automatic fire pumps are usually needed where a ___________ may occur
immediately. - ✔✔high water demand
✔✔water alarms serve as fire extinguishing systems and serve as a(n) _________. -
✔✔automatic fire alarm.
✔✔sprinkler systems are required to have an approved motor gong, bell, horn, or
________. - ✔✔siren
✔✔sprinklers manufactured after 1/1/2000 are required to have a _____________. -
✔✔sprinkler identification number (sin)
✔✔_________ sprinklers have been recalled. - ✔✔cycling
✔✔sprinkler heads exposed to ___________ conditions are often covered with a coat of
wax, or lead. - ✔✔corrosive
✔✔at a distance of 4 feet below the deflector, the spray pattern covers a diameter of
_________ feet when discharging at 15 gpm. - ✔✔16
✔✔large drop sprinkler heads are used to break through the strong __________ of high
challenge fires. - ✔✔updrafts
✔✔if a fire has been completely extinguished, the __________ or their representative
may close the control valve. - ✔✔building owner
✔✔build up of foreign materials on sprinkler heads is commonly called _________. -
✔✔loading
✔✔spare sprinklers shall be kept at the facility when the temperature does not exceed
_________. - ✔✔100 degrees fahrenheit