CIP Level 1 Exam 3 Questions With 100%
Verified Correct Answers.
ISO 8504-3 is the standard for which of the following?
Solvent Cleaning
Hand and Power tool Cleaning
solvent cleaners
Organic Alkaline Acidic & Emulsion Cleaner also Water & Detergent
Organic Cleaners Cannot Remove the following:
Inorganic materials such as Chlorides,Sulfates, weld Flux & mil scale
Organic Solvents cleans metal by :
Dissolving and diluting the oil and grease contaminants on the surface
Alkaline Cleaners clean by :
Wetting, emulsifying, dispersing, and dissolving containments
Acidic Cleaners are limited to effect but highly effective to:
Acid cleaners are limited effectiveness on removing grease and oil from surfaces but very
effective at removing mill scale and rust from steel
Detergents work by:
Wetting, emulsifying, dispersing the contaminants, which are then washed away with hot water
or stream
Emulsion Cleaners
Are formulated to spray surface like detergents,emulsify,disperse, and float contaminants to the
surface of the substrate
Fresh Water (Used in Conjunction with Steam Cleaning or Pressure Washing)
, Is a powerful solvent itself that can effectively clean surfaces
Wipe test is use for ?
To detect any remaining residue on clean surfaces.
Ultraviolet (UV) Light Test is ?
Use to detect oil or grease in small quantities on cleaned surfaces.
What is a Water Break Test ?
It's a test used to detect oil on the surface if oil is present it will form droplets or large blotchy
areas
Surface Dust Test
Determines the quantity and size of dust left on the surface by simply removing the dust tape ,if
dust is left it can reduce coating adhesion leading to premature coating failure .
Potassium Ferricyanide Test is ?
A qualitative test for water -soluble ferrous salts (ions) that is designed to only detect presence
on steel substrates.
Salt meter is a method ?
That is faster than Bresle patch but is equivalent .
An conductivity test measures ?
Measures the conductivity of a solution that contains chloride.
Hand tools manually involves what ,and can typically remove all loose mill scale, coatings
rust and other loose detrimental materials
It involves manually chipping, scrapping , brushing and sanding surface to remove foreign
material .
Power Tool Cleaning :
Can remove loosely (SSPC-SP 3) and tightly adherent SSPC-SP 11 & SP 15
Verified Correct Answers.
ISO 8504-3 is the standard for which of the following?
Solvent Cleaning
Hand and Power tool Cleaning
solvent cleaners
Organic Alkaline Acidic & Emulsion Cleaner also Water & Detergent
Organic Cleaners Cannot Remove the following:
Inorganic materials such as Chlorides,Sulfates, weld Flux & mil scale
Organic Solvents cleans metal by :
Dissolving and diluting the oil and grease contaminants on the surface
Alkaline Cleaners clean by :
Wetting, emulsifying, dispersing, and dissolving containments
Acidic Cleaners are limited to effect but highly effective to:
Acid cleaners are limited effectiveness on removing grease and oil from surfaces but very
effective at removing mill scale and rust from steel
Detergents work by:
Wetting, emulsifying, dispersing the contaminants, which are then washed away with hot water
or stream
Emulsion Cleaners
Are formulated to spray surface like detergents,emulsify,disperse, and float contaminants to the
surface of the substrate
Fresh Water (Used in Conjunction with Steam Cleaning or Pressure Washing)
, Is a powerful solvent itself that can effectively clean surfaces
Wipe test is use for ?
To detect any remaining residue on clean surfaces.
Ultraviolet (UV) Light Test is ?
Use to detect oil or grease in small quantities on cleaned surfaces.
What is a Water Break Test ?
It's a test used to detect oil on the surface if oil is present it will form droplets or large blotchy
areas
Surface Dust Test
Determines the quantity and size of dust left on the surface by simply removing the dust tape ,if
dust is left it can reduce coating adhesion leading to premature coating failure .
Potassium Ferricyanide Test is ?
A qualitative test for water -soluble ferrous salts (ions) that is designed to only detect presence
on steel substrates.
Salt meter is a method ?
That is faster than Bresle patch but is equivalent .
An conductivity test measures ?
Measures the conductivity of a solution that contains chloride.
Hand tools manually involves what ,and can typically remove all loose mill scale, coatings
rust and other loose detrimental materials
It involves manually chipping, scrapping , brushing and sanding surface to remove foreign
material .
Power Tool Cleaning :
Can remove loosely (SSPC-SP 3) and tightly adherent SSPC-SP 11 & SP 15
